premaz iz paste - POPOLNA POVEZAVA

{"All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with mitred edges and carded surfaces.":"Vse vrste gipsanih plošč z ali brez izolacije (steklena volna, kamena volna, polistiren) z mitrimi robovi in kartoniranimi površinami.","STORAGE":"SHRANJEVANJE","TECHNICAL DEFINITION":"TEHNIČNA DEFINITION","CE 78 PERFECT’JOINT is a ready-mix paste specially formulated for jointing mitred-edge plasterboards in association with plaster tape.":"CE 78 PERFECT’JOINT je pripravljena mešanica paste, posebej formulirana za spojitev gipsanih plošč z mitrimi robovi v povezavi z gips trakovi.","• CE marking":"• CE oznaka","Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.).":"Pred dejansko spojitvijo zapolnite morebitne naključne praznine med ploščami in drugimi področji (odpadki, poslabšanje površine itd.).","APPLICATION":"UPORABA","REFERENCE DOCUMENTS":"REFERENČNI DOKUMENTI","• DTU 25.41 and DTU 25.42":"• DTU 25.41 in DTU 25.42","COVERINGS":"PREVLEKE","Resin, water, calcium carbonate, thickener, preservation agent and various adjuvants.":"Smola, voda, kalcijev karbonat, zgoščevalec, konzervans in različni adjuvanti.","The paste is white.":"Pasta je bela.","Plasterboard primer.":"Temeljni premaz za gipsane plošče.","Smoothing filler.":"Izravnalna masa.","COMPOSITION AND APPEARANCE":"SESTAVA IN VIDEZ","12 months in original unopened packaging away from frost and high temperatures.":"12 mesecev v originalni neodprti embalaži, stran od zmrzali in visokih temperatur.","• DoP":"• DoP","7 and 25 kg buckets.":"Vedra po 7 in 25 kg.","SUITABLE SURFACES":"USTREZNE POVRŠINE","PACK SIZE":"VELIKOST PAKIRANJA","Apply manually by «buttering» the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape (milled face against the jointing coating).":"Ročno nanesite tako, da 'namazate' mitrni rob z uporabo 10 ali 15 cm gips spatule in nato dodajte trak (mleta stran proti spojni prevleki).","• NF EN 13963":"• NF EN 13963"}