Izdelki za 24 v 20ah (17)

The 24Volt 6.8 kWh (266Ah) lithium battery is a powerful and compact battery ideal for a wide range of applications. From RV energy storage, auxiliary power and outboard trolling motors to industrial work platforms and other industrial equipment, it is ready to power all your needs

Battery HMK-2-200 specifications: - Rated voltage: 2V; - Rated capacity: 200 Ah; - Dimensions (LxWxH), mm: 173x111x329; - Weight: 12,5 kg; - Technology: AGM; - Battery Type: Sealed Lead Acid; - Terminal type: M8 (terminal diameter of 20 mm for a bolt of 5 mm); - Design Life: 15 years. HMK series batteries are lead-acid, sealed, maintenance-free with a rated voltage of 2 V. HMK are manufactured using AGM technology (electrolyte absorbed in a fiberglass separator). Thanks to this technology, batteries do not require topping up distillate through entire service life. High energy density HMK series recommended for use in uninterruptible power systems, safety and emergency lighting, communications equipment and other equipment requiring long battery backup time without additional charge.

Piles et accus - Pile sèche type 800 - 6V - 7-9 Ah

24VDC / 5VDC 10A

UltraMax 12v 22Ah Sealed Lead-Acid High Capacity Deep Cycle Battery. It is an excellent 18 hole battery for use with Powakaddy, Hillbilly® Motocaddy®, Mocad®, Topcart®, Taxi® and many others with the same case size. Can also be used on Wheel chairs, Lawn Mowers, Toy Cars, Lifts etc. Replaces Yuasa NPC17-12, Yuasa TEV12180, TEV12210, YPC22-12, Ultramax NP20-12 (standby use only), and NP18-12B. Please Note: This battery does not come with connecting leads for your Mocad / Hill Billy Trolley. It is a simple operation to take the leads from your existing Mocad battery and fit them to your new battery, although we can supply the leads if required. Dimensions: L(mm) W(mm) H(mm) 181 76 167 Product Code : SLAUMXNP22-12

Neben unse­rem Lie­fer­pro­gramm der Ein­zel­kom­po­nen­ten bie­ten wir auch Kom­plett­ar­ma­tu­ren (Antrieb+Armatur) und spe­zi­ell auf Ihre Bedürf­nis­se zuge­schnit­te­ne Son­der­lö­sun­gen an. Pro­jekt­be­zo­gen oder als Seri­en­kom­po­nen­ten, zahl­rei­che Vari­an­ten und Optio­nen, geplant, kon­stru­iert und gebaut bei ARIS

NECRON NPL SERIES 18 AH 12V BATTERY MAINTENANCE FREE - VRLA -AGM

100GS Capacity:100 Ah CCA:800 A Layout:Left Hold Down:B3 Usage:Car, Truck Dimension:330✕175✕205 mm Short Code:600033080

Sistemi di allarme e antincendio UPS – gruppi di continuità Protezione catodica Telecomunicazioni Servizio Tampone Principali caratteristiche: Monoblocchi da 6 e 12Volt Capacità da 7,6 Ah a 258Ah Vita di progetto: 12 anni a temperatura ambiente controllata Contenitori in ABS UL94HB - Su richiesta in materiale UL94-V0 Bassa autoscarica Nessuna restrizione per il trasporto, sia aereo, mare e terra Senza manutenzione – Maintenence free Riciclabili al 100% le batterie sono prodotte in conformità alle normative IEC 896-2; DIN 43534, BS 6290 Pt4, Eurobat.

LKG series is a 105℃ standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKG standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKG2W102MS070K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:450V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:1000μF Load life:2000 hours Size:35*70mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+105℃ | -25℃～+105℃

12 Vdc 240 Vac in custodia • Potenza: 1W • Tensione di uscita: 12 V • Corrente nominale: 100 mA • Ingresso nominale: 240 Vac • Intervallo di frequenze: 50-60 HZ • Temperatura di esercizio: 60 °C • Custodia: UL94 V2

In der Leistungselektronik im allgemeinen, speziell in niederinduktiven Zwischenkreisen höherer Spannungen sowie auch in Entladeschaltungen ist die Forderung nach niederinduktiven Kondensatoren mit Problemen verbunden: Traditionelle Hochspannungskondensatoren sind mit öl gefüllt, und die für die Luft- und Kriechstrecken großzügig auszulegenden Anschlussisolatoren wie auch der interne Sicherheitsmechanismus tragen wesentlich zur Eigeninduktivität des Kondensators bei. Basierend auf jahrzehntelanger eigener Erfahrung bei der Metallisierung von Kondensatorfolien hat ELECTRONICON unter Nutzung spezieller Metallisierungsarten eine Reihe von Hochspannungskondensatoren in selbstheilender Technologie geschaffen. Trotz der hohen Spannungsnennwerte wird die E51 Reihe in trockener Technologie und ohne aufwändige Anschlüsse gefertigt. Das Kondensatorelement im Inneren des Bechers aus selbstverlöschendem Kunststoff ist in PUR-Harz vergossen.

STATIC DIGITAL VOLTAGE REGULATION Effectual with extremely ultra fast speed of response – ensures hıghest performance for sensitive / mission critical loads and applications

The 48 Volt 3.4 kWh (66.5Ah) lithium battery is a powerful and compact battery ideal for a wide range of applications. From drive trains, auxiliary power to industrial work platforms and other industrial equipment, it is ready to power all your needs. Easy to connect and disconnect due to its flex connectors.

The 12 Volt 1.7 kWh (133Ah) lithium battery is a powerful and compact battery ideal for a wide range of applications. From RV energy storage, auxiliary power and outboard trolling motors to industrial work platforms and other industrial equipment, it is ready to power all your needs

LKP series is a standard level snap in type aluminum electrolyte capacitor that matches following SPEC. 1. LKP standard snap in type aluminum electrolytic capacitor can be used in switching power, frequency converter, air conditioning,for welder and PCB mounting etc. 2. Size can be customized according to your design. 3. The terminal type is varied from pins to soldering lug according to your design. 4. OEM/ODM is welcomed, can be customized according to your requirement. Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. Place of Origin:Guangdong, China (Mainland) Brand Name:Liron Model Number:LKP2G471MS045K Type:Snap in Aluminum Electrolytic Capacitor, snap in aluminum electrolyte capacitor Application:General Purpose Package Type:Carton Rated Voltage:400V Operating Temperature:-40~85℃ Product name:snap in type aluminum electrolyte capacitor Capacitance:470μF Load life:2000 hours Size:35*45mm, or as customized ODM service；larger capacitance, bigger size, larger working voltage Rated voltage range:10V～250V | 315V～500V Capacitance tolerance:±20%（20℃，120Hz） Leakage current:1≤0.01CV（μA）or 1.5mA(Whichever is smaller){20℃，after 5 minutes} C=Nominal capacitance (μF) Standard:JIS C 5101-4 Operating Temperature range:-40℃～+85℃ | -25℃～+85℃

The PK16™ capacitor can be universally used for the assembly of low inductance DC buffer circuits and DC filters; with its high energy density it can replace banks of series-connected electrolytic capacitors as well as large film capacitors in rectangular cases. The capacitance in a DC buffer circuit must be sufficiently sized to both handle and smoothen the occurring ripple currents. The traditional use of series-/parallel-connected electrolytic capacitors offered large capacitance at seemingly low cost, however the low cost per microfarad is countered by the very low current strengh, the high sensitivity to voltage and current surges, as well as a substantial risk of failures in the field, resulting in high maintenance cost. Our advanced know-how in special capacitor film coating and many years of practical experience in designing and manufacturing capacitors have allowed us to develop our PK16™ range with high capacitance density.