Izdelki za adi farma omejena (2)

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Die Start & Stop Autobatterien vom Typ EFB eignen sich für kleine und mittelgroße Autos und stellen die Weiterentwicklung der klassischen Nassbatterien dar. EFB-Batterien haben einen reduzierten Innenwiderstand und garantieren die doppelte Anzahl an Entladezyklen im Vergleich zu einer herkömmlichen Batterie. Diese Batterien sind geeignet: für Fahrzeuge mit Start-Stopp-System; Fahrzeuge ohne Start-Stopp-System, die aber im Stadtverkehr verkehren; Fahrzeuge ohne Start-Stop aber super ausgestattet. Wenn eine EFB-Batterie werkseitig in eine Maschine eingebaut wurde, kann diese durch eine andere EFB-Batterie ersetzt werden, aber wenn eine leistungsstärkere Batterie gewünscht wird, kann auch eine AGM-Batterie eingebaut werden.