Izdelki za analizator vlage (2)

The TOR-2 transformer oil express-tester is designed to determine the moisture and hydrogen content in mineral insulating oils and ether based insulating oils. Moisture and hydrogen content is measured in parts per million (ppm). Knowing the content of hydrogen and moisture in the oil, as well as the rate of parameter change, it is possible to detect problems developing in the transformer in advance and to take timely measures to prevent damage to the transformer. Moisture measurement The device measures the activity of the water using a capacitance sensor, which ensures stability over time and contamination resistance. The oil temperature is also measured. The moisture content is calculated from these measurements. Hydrogen measurement A highly selective solid state sensor immersed directly in oil is used to measure hydrogen content. The sensor ensures accuracy and reliability of direct measurements.

The METRINCO M118W moisture tester is designed to measure the moisture content of wood in a non-destructive manner. The moisture meter is designed to measure the moisture content of processed wood (planed board or beam, finished wood products, etc.). It has the highest measurement accuracy among our line of non-destructive wood moisture meters (in practice, the accuracy is better than 1%). It is designed to work with wood up to 8 mm thick. Suitable for measuring the moisture content of veneer and lamellas. This model has a dielcometric method of measuring wood moisture content - the test sample is not damaged during testing. To take a measurement, simply place the device on the surface with the sensitive sensor and wait for the readings to stabilise. Features of the Metrinco M118W: The device can determine the moisture content of wood products in the range from 0 to 40% with very high accuracy.