Izdelki za betonski pigment (38)

Summenformel:LiCoO2 CAS:12190-79-3 Molekulargewicht: 97,87 Eigenschaften: Dunkelblaues Pulver, wasserunlöslich. Verwendung: Wird als Rohstoff für Lithium-Sekundärbatterien verwendet. Lithiumkobaltoxid ist ein besseres Kathodenmaterial in Lithium-Ionen-Batterien. Es bietet die Vorteile einer hohen Betriebsspannung, einer stabilen Entladung, einer hohen spezifischen Energie und einer guten Zyklenleistung, ist jedoch teuer ist hoch (Kobalt wird verwendet), schlechte Sicherheit, durchschnittliche Zyklenlebensdauer und schlechte Materialstabilität. Es wird hauptsächlich als Kathodenmaterial bei der Herstellung von Lithium-Ionen-Batterien für Mobiltelefone, Notebooks und andere tragbare elektronische Geräte verwendet. Derzeit hat die Spannung von Lithiumkobaltoxid 4,35–4,45 V erreicht.

Wir sind Ihr Partner für individuelle Pulverbeschichtung.

Unsere exklusiven Produkte von CREAREV aus der Schweiz und Mercadier Beton Cire zur fugenlosen Wand - und Bodengestaltung.

Protech Oxicrom Protech Oxicrom is an inorganic oxide/hydroxide based powder compound. Added in appropriate quantities and homogeneously distributed, it is ideal for the pigmentation of cement or similar conglomerates, plaster and paint. Protech Oxicrom oxides are available in yellow, red, brown, green, blue and black. Ferrous oxides have been used since ancient times for colouring paints. The main ferrous minerals from which the pigments are obtained are, of course, iron and its derivatives and compounds. The main colours of these pigments are dark gray/black in relation to ferrous oxide derivatives, and classic rusty red in relation to ferric oxide derivatives. Other more complex compounds may have colourings of yellow, orange, red and brown. Protech Oxicrom is ideal for the pigmentation of concrete for architectural and industrial floorings of washed gravel, shotcrete and exposed stone tiling, as well for the formulation of dyes and paints. The use of Protech Oxicrom ferrous oxide compounds is extremely simple: in the case of concrete, cements, mortars, plasters and so on, the pigment must be gradually and uniformly added to the mixer and mixed until a homogeneously coloured mixture is obtained. The indicative dosage of approximately 3-10% of the weight of the mixture to be pigmented should be varied according to the desired colour intensity. Add from 1 to 10% of Protech Oxicrom on the weight of the binder present in the mixture to the desired colour intensity. Bag 25 kg

Acrylic copolymer emulsion based, surface filling feature, colored Pigmented, mineral-added, High Adherence Concrete Primer is a colored primer that allows concrete wall and ceiling surfaces to be plastered with gypsum plaster. Thanks to its quartz sand-added formula, it strengthens the adhesion strength of gypsum and gypsum-lime-based liquids to concrete surfaces, and prevents rapid water loss of the plaster and the formation of cracks due to it. For indoor use, not recommended for use on damp and wet surfaces. Do not store below 5 0C Scope of application Especially on concrete-based surfaces, vertical and horizontal (column, curtain, wall, ceiling and similar) is used as adherence primer before gypsum plaster Drying:Drying time is at least 24 hours at 23 degrees and 50% relative humidity. is the hour. Thinning:With continuous mixing, 15%-20% of clean water is added. To mix up It is continued for 3 minutes fol

Simon monokristalles synthetisches Diamantpulver wird überwiegend zur nassen und trockenen Endbearbeitung von Hartmetallwerkzeugen verwendet. Natürlich aber auch für alle NE-Metalle.

At TRADIUM, neodymium is available in the following forms for industrial use: - Neodymium metal - Neodymium oxide Your point of contact for neodymium is: Jan Giese Phone: +49 (0)69 50 50 250 - 237 We are looking forward to hearing from you!

Zum Einsatz an Polier-, Lappenscheiben und Bürsten. Die Blöcke werden an die rotierenden Scheiben gedrückt und erweichen sich an der Oberfläche durch Reibungswärme. Dadurch überträgt sich die Paste auf die Scheibe.

Die Produktpalette Farblehme / Farbsande umfasst eine Vielzahl natürlicher Tone, Lehme und Sande, die sich durch Ihre gefällige Eigenfarbe auszeichnen und nicht nachträglich eingefärbt sind. Ein breites Farbspektrum von gelb über rot bis hin zu Farben wie grün oder taubenblau lassen sich mit dieser fein ausgewählten Produktlinie abdecken. Als reine Naturprodukte lässt sich diese Linie optimal in Lehmputzen und anderen rein natürlichen Produkten anwenden. Alle Tone sind auf 100 µm gesiebt, die Sande sind in Größen 0 – 0,5 mm oder 0 – 2 mm erhältlich.

Carbonate de calcium haute qualité en vrac ou en sac. Provenance d'Egypte, certificat communiqué et délivré. Livraison au port , distribution internationale. Instrument utilisé LC.

Titanium-based powder is a high-performance material widely used in various advanced industries, including aerospace, biomedical, automotive, and additive manufacturing. Known for its exceptional strength-to-weight ratio, corrosion resistance, and biocompatibility, this powder is ideal for producing lightweight yet durable components.

Argile en poudre surfine

quarzite rosa ambra

Bentonit, 1m558i, Mykotoxinbindung, Na-Bentonit, aktivierter Bentonit, nicht aktivierter Bentonit, Bindemittel, Trennmittel, Calciumbentonit, Natriumbentonit, Ca-Bentonit, Deponieabdichtung 1000 kg big bags / 25 kg Säcke 1m558i, Mykotoxinbindung, Na-Bentonit, aktivierter Bentonit, nicht aktivierter Bentonit, Bindemittel, Trennmittel, Calciumbentonit, Natriumbentonit, Ca-Bentonit, Deponieabdichtung

Lieferzeit: 3 - 5 Werktage Lieferkapazität: 100.000Kg / monatlich Mindestbestellmenge: 1 x 25Kg Sack Anfrage per E-Mail senden Telefonnummer anzeigen 25Kg Sack

Sous forme monohydraté 30%, le sulfate de fer est la solution privilégiée par le marché de la cimenterie pour la réduction du chrome hexavalent. Ce produit offre l’alternative la plus fiable et la plus propre aux fabricants de ciment par rapport aux autres options du marché. Le sulfate de fer est également commercialisé sur le marché des producteurs d’engrais.

Aluminum hydroxide, white solid, is a typical amphoteric hydroxide that is insoluble in water but soluble in acid or alkali. It can be transformed into alumina after heated in the air for dehydration, which is important for alumina production. Aluminum hydroxide is a widely used chemical product, and it is mainly used as plastic and polymer fillers, blanket flame retardant and binder, epoxy resin filler, toothpaste fillers, glass ingredients as well as paper color fillers and coatings. It can be also used to product sulfuric acid Aluminum, alum, aluminum fluoride and sodium aluminate, and to synthesize molecular sieve. The gel and drying gel of aluminum hydroxide can be used in medicine as antacids to neutralize gastric acid and protect ulcer surface for the treatment of gastric and duodenal ulcer disease and hyperacidity

Designed for the preparation and regulation of the properties of water-based drilling fluids with a low solids content.

Nuestro Silicato de Circonio hecho con arena de origen Australia y Sudáfrica. También disponemos de Harina.

There are 6 types of dry pressing ferrite powder for customers: YXC-C1, YXC-C2T, YXC-C3T, YXC-C1, YXC-C2. The procedure summaries for making magnet are as follows: •The necessary secondary additives have been added into the powder during the grinding process. Customers only need to add proper quantity of binders and lubricants. The powder must pass through 120 mesh sieve before pressing, so as binders to be uniformly distributed for better orientaton •Please take care of the cleaning of the equipments. Any other materials and impurity should mot be mixed into the powder •During pressing, the pressure required is ≥5000N/cm2, and the magnetic field density is >7000 Oe(560KA/m) •The sintering temperature for reference is between 1220 °C and 1270 °C. Please note that the proper sintering temperature should be defined in accordance with the status of the sintered sample pill Material:ferrite magnet Size:can be customized package:as required

In jedem Fall erfordert eine Sanierung hervorragend ausgebildetes Fachpersonal und jede Menge ‘know how’ und eine individuell Begutachtung. Schadhafte Böden verursachen gerade im industriellen Bereich häufig hohe Folgekosten, beispielsweise durch erhöhte Abnutzung von Flurförderfahrzeugen oder Transportschäden. Zusätzlich fallen in den Bereich der Sanierung aber auch Maßnahmen bei Nutzungsänderungen oder optischen Forderungen. Lassen Sie sich von uns ein unverbindliches Angebot erstellen und profitieren Sie von unseren Erfahrungen. • Ursachenforschung • Untergrundanalyse • ein angemessenes Konzept • Untergrundvorbehandlung • Systemwahl • fachkompetente Ausführung

Les produits broyés sont les produits historiques de la carrière, expérimentée dans ce domaine depuis plus de 150 ans. Ils sont essentiellement utilisés en verrerie, et peuvent, à la demande, être séchés, défillérisés (on parle alors de 0,1/2mm) et éventuellement réhumidifiés. Leur faible taux d’impureté en aluminium et en fer et leur haut taux en calcaire (>98,5%) en font un produit de choix, introuvable ailleurs à 250 kilomètres à la ronde. Ils peuvent être, au choix, chargés par péniches (jusque 1350 T) ou par camions. Contactez-nous pour des informations complémentaires

Acteur de vos domaines: Sourcing matiére premiére Cosmetic Santé et bien etre Le magnésium marin sous forme sèche en poudre peut s’utiliser en complémentation alimentaire pour pallier aux carences et lutter contre le stress et la fatigue. L’oxyde de magnésium marin est extrait de notre eau de mer. Sa grande pureté garantie sa forte teneur en magnésium. L’eau de mer est deposée dans des marais salants pour obtenir une évaporation naturelle et concentrer l’eau en minéraux. Cette eau est ensuite plasée dans une tour d’atomisation afin d'evaporer l'eau et pour ne garder que le concentré minéral. La teneur de notre concentré minéral est à hauteur de 85 %.

Ferric alum appears as a white powder or crystalline. The crystalline and powder forms of the substance are soluble in water. However, it is not soluble in organic solvent such as ethanol. When in water, the solution appears clears and does not form a residue. Both of them are not toxic and do not catch flames. However, it can present an environmental hazard if spread in a large area. Aluminium oxide Al2O3 %:min 16.0 Iron Fe content%:max 0.5 Water insoluble matter 1%:max 0.15 AS %:max 0.0005 Grain size:15 mm max

Ciment de 1 à 25kg Matériaux de construction

Calsium Sulfate Whisker （CSW）------ a beaucoup d'excellentes propriétés physiques et chimiques, combinant à la fois la supériorité dans Fibre de renforcement et charge inorganique superfine dans le même, CSW pourrait être non seulement appliqué comme flexibilisant de renforcement ou charge fonctionnelle dans la résine, le plastique, le caoutchouc, le revêtement, la peinture, la fabrication du papier, l'asphalte, la céramique, les matériaux de friction et d'étanchéité, mais également appliqué comme matériau filtrant, matériau d'isolation, matériau d'isolation réfractaire, matériau de réflexion infrarouge, propriété élevée matériau d'isolation du paquet de fils.

Chemical appearance: Copper (II) sulfate pentahydrate is a blue crystalline solid. It is not combustible and has a strong, nauseating metallic taste. However, it is odorless. When dehydrated, it turns white. Chemical application and strengths: Copper sulfate is made by treating copper with hot concentrated sulfuric acid. The crystal combines with other elements for the preparation of different compounds. In its pure nature, it is used as fungicide. It is also mixed with sodium hydroxide to control fungus in melons and grapes. Copper sulfate is used in swimming pools as an algaecide. It is also used for the control of invasive plants in the pools and controls roots that may have punctured the piping system. Fish farmers use it to kill off the invasive types of snails in aquariums. However, its use in the aquarium is highly controlled, as it is toxic to fish in high quantities. CAS Number:7758-99-8 HS Code:283325

Our calcium bolus Calcitop is a fast-acting calcium supplement designed to solve a calcium deficiency (hypocalcemia) around calving. This deficiency will cause a lower feed intake and milk production and could potentially lead to (subclinical) milk fever. Especially from the second calving and later cows are sensitive to it. You can read everything about milk fever on our blog.

BIOREL® is a ready-to-use, modern biological release agent emulsion, made from vegetable raw materials. BIOREL® is environmentally friendly, easily biodegradable, technically harmless and is not subject to any dangerous goods classification. BIOREL® is a universal release agent that among other things It is used in the production, transport and processing areas of tar and road construction, where it e.g. the recurring difficulties and problems caused by buildup of asphalt mix prevented. BIOREL® is also used for all conventional and modern formwork. BIOREL® is suitable for universal use in the precast plant as well as for in-situ concrete production and with conventional methods of vibration and shaking technology. BIOREL® is particularly recommended for the production of uniform and low-pore areas such as large formwork or exposed concrete BIOREL® will also impress you with its outstanding price / performance ratio convince.

CBG-DP-90 is a dense, refractory, self-flowing concrete with low cement content intended for use in aggressive environments, including contact with molten metals and slags at temperatures up to 1,900°C, especially for the production of monolithic linings of steel ladles, elements of the metal tract and as a repair concrete mass. It can be used for monolithic linings as well as for products of any configuration and complexity. — high temperature resistance — high temperature of liquid phase formation — high mechanical strength — high temperature of onset of deformation under load — does not contain substances that cause allergic reactions — resistant to molten metal, acid and alkaline slags Main application: ferrous, non-ferrous and glass industry, lining of melting aggregates in the production of mineral fibres etc.