Izdelki za del motorjev (56)

950 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 950 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. 950 fuel tank plug can be supplied in different colours on request. The trapezoidal threaded filler neck profile, compatible with 950 tank cap, is obtained directly from the tank molding. The ergonomic design makes the handle easier also when the worker uses his working gloves; PASSAGE DIAMETER:32 mm Passage

Plastic Emergency stop push button switch protective cover with aluminium silkscreened plate. This product can be supplied in a wide range of colors (black, blue, red, green) for various needs in different application sectors. On request, we supply the protective niche already completed with emergency stop push button. New rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster Our plastic cover protector for stop Emergency push button allows it to be recessed near the machine control panel, as required by the EN ISO 13850: 2015 art. 4.5, in order to prevent accidental activation of the emergency stop device. Our niche is used in many application, such as generating sets soundproofed enclosures. CATEGORY:Niches / Deckfill Holder COMPONENTS:For Emergency Buttons

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. We can propose this product in a wide range of colors (gray, blue, red, green, white) for various needs in different sectors and, at your request, equipped with safety chains or cables or lock protection door to protect it from dust, debris residues and rainwater. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, Pushbutton actuator with key, Handle with key, Selector switch activator key). PASSAGE DIAMETER:40 mm Passage

Filler necks internal bayonet coupling passage diameter 30 mm, in steel or galvanized steel, to be screwed, welded or pressed on tank. They are available in different lengths and possibly equipped with vent / breather connection. In the following section you will find the most common versions of internal bayonet filler necks passage diameter 30 mm: for more details, please refer to the product’s technical sheet. This products shall be sold in combination with all our internal bayonet tank caps passage diameter 30 mm. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:30 mm Passage

M60X2 filler neck male threaded, to be screwed, welded on tanks or connected to filling flexible pipes for fuel, hydraulic oils and other fluids. This filler neck is available in different lengths, materials and types. On request we can provide it with removable or fixed filter or complete filling systems with flexible pipes. M60X2 filling system can be combined with our Niches 60 F series or directly with our ALU M60X2 and M60X2 with key threaded caps. Available versions with vent/breather connection and types in stainless steel for nautical applications and corrosive environments. The adoption of accurate production processes also performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:54 mm Passage

D.96 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and diameter of cap covering 96 mm. The cap is equipped with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and, at your request, we can supply it in a wide range of colors for various needs in different sectors. On request we can equip this cap with safety chains or cables, as well as with protection door for lock, to protect it from dust, debris residues and rainwater. The D.96 fuel cap shall be sold with our bayonet filling systems passage 40 mm, with our niches for connection to flexible fuel hose Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs. PASSAGE DIAMETER:40 mm Passage

P3 oil tank cap female threaded, in plastic material, passage diameter 32 mm with NBR sealing gasket. It is available hermetic or ventilated. On request, we can supply versions with different colours, customized writings and oil logos. We also provide versions with modified design for easing the handle even when worker uses work gloves. We supply P3 filling plug combined to our P3 threaded filling system, possibly also equipped with safety cable and removable filter. It is however possible to obtain the threaded filler neck profile directly from the tank molding. P3 oil tank cap is generally used on tanks of building and agricultural vehicles, such as earth-moving machineries, on machines for cleaning and environment and on oil tanks of special vehicles. The use of accurate production processes in all phases and the careful selection of raw materials guarantee quality and reliability of our product over time. CATEGORY:Caps / Plugs PASSAGE DIAMETER:32 mm Passage

940 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated, ventilated through valves or reduced ventilation. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 940 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions with different colours, customized writings and logos on request. The trapezoidal threaded filler neck profile, compatible with 940 cap, is obtained directly from the tank molding. CATEGORY:Caps / Plugs PASSAGE DIAMETER:32 mm Passage

R tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleansers, in steel or stainless steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the R tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. The steel version can be supplied also with black cap covering. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). PASSAGE DIAMETER:40 mm Passage

D.40 tank cap for gasoline, diesel or biodiesel, hydraulic oil, lubricating oil and cleanser, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. This product is available hermetic and ventilated and we can propose it in a wide range of colors (black, blue, red, green) for various needs in different sectors. At your request, it can be equipped with safety chains or cables. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments as well as for biodiesel and urea solutions tanks (AUS 32 (AdBlue®)). This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customize in relation to you specific needs. PASSAGE DIAMETER:40 mm Passage

Flush-mount niches 60 F series in technopolymer, for connection to filling fuel flexible hose Ø 60 mm. These niches are supplied in combination with three of our female threaded tank caps, passage diameter 54 mm: ALU 2″ tank cap ALU M60X2 tank cap M60X2 tank cap with key We can produce our flush-mount plastic compartments for plug housing in a wide range of colors (black, blue, red, green, white) to meet the most varied aesthetic requirements or allow a better identification of the type of fluid to be loaded into the tank. It’s available the new rectangular NBR sealing gasket, specifically designed for all our external plastic deck fill holders. This gasket provides a perfect seal without the need for sealants or silicone, thus making assembly, disassembly and maintenance operations faster. CATEGORY:Niches / Deckfill Holder PASSAGE DIAMETER:54 mm Passage

AIR fuel tank cap with key in technopolymer and aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be equipped with safety chain or cable as well as with removable filter. On request, we can supply it in grey or white color. AIR tank cap is usually sold with our bayonet filling systems passage Ø 40 mm with flange or with our niches series 32–40–50 for connection to flexible fuel hose of different diameters (Ø 32 mm / 40 mm / 50 mm) or with our complete filling systems, that can be customized in relation to specific needs. The additional use of built-in housing for filling caps make easier and very faster the assembling operation of fuel filling systems in the most industrial applications. PASSAGE DIAMETER:40 mm Passage

240 fuel tank cap with key, in steel and stainless steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 240 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply it also with black cap covering and, at your request, a version with aluminium effect of cap covering. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments and Urea solutions (AUS 32 (AdBlue®)). PASSAGE DIAMETER:40 mm Passage

FN fuel tank cap in galvanised steel, with external bayonet coupling passage diameter 31 mm and sealing gasket. It is available hermetic version. FN fuel cap is usually used for fuel tanks in agriculture and building industry. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and CE regulations. PASSAGE DIAMETER:31 mm Passage

Paramotore avvolgente in alluminio oppure in fibra di carbonio o plastica dall’estrema robustezza e peso contenuto. Protegge le parti vitali del motore da urti con rocce e detriti protezione contro la corrosione ed estetica la parte Inferiore liscia non crea intoppo quando si attraversano gli ostacoli Disponibile delle principali marche (Motek, Racetech, Moose Racing, etc) ed in vari colori.

V7 S fuel tank cap, in aluminium or stainless steel and anodised aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and can be equipped with safety chains or cables and removable filter. On request it can be supplied in other colors ( blue, red, gold ) for various needs in different sectors. We manufacture types with anodised aluminium cap covering and the other metal components in stainless steel, for nautical application and corrosive environments. The V7S fuel tank plug is usually supplied with our bayonet filling systems passage 40 mm with flange, to be screwed on the hulls of boats or inflatable boats, on the special vehicles bodies or on the canopies of industrial machines; PASSAGE DIAMETER:40 mm Passage

Inspection tank caps male threaded, in plastic material, complete with sealing gasket and fixing flange. We supply two different types of this product: Inspection cap for Ø 124 mm hole Inspection cap for Ø 215 mm hole We can also provide them equipped with safety chain. The inspection tank caps are generally used for canopies of power generators and on tanks of agricultural machines and industrial vehicles, spray dryer, water tanks and so on. We always guarantee quality and reliability of our product over time. We perform several strength and durability tests and tests for product quality control during the various processing phases. On request we can issue the relevant certificates in compliance with national and international regulations. CATEGORY:Other Components MATERIALS:Plastic

2” filler neck male threaded, to be screwed, welded on tanks or connected to filling flexible pipes for fuel, hydraulic oil and other fluids. It is available in different lengths, materials and types. On request we can supply versions with removable or fixed filter, vent/breather connection or complete filling systems with flexible pipes. 2″ threaded filler neck can be combined with our niches 60 F series, our threaded caps ALU and ASM.CF or our mechanical threaded level gauge cap. It can be used in various sectors, including nautical applications and corrosive environments for which we suggest stainless steel versions. The adoption of accurate production processes also performed with latest generation CNC numerical control machines and the use of selected raw materials, are the first guarantee of quality and reliability over time of our product. CATEGORY:Filler Necks / Filling Systems PASSAGE DIAMETER:54 mm Passage

D.40 fuel tank cap with key, in technopolymer and steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available ventilated and, at your request, it is available in various colors. This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems, that we can customized in relation to you specific needs. The D.40 cap with key is used for different applications in several industrial fields, such as generating sets, containers, soundproof canopy of generating sets, lighting towers, earth moving machines, wheel excavators, motor pumps and so on. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. PASSAGE DIAMETER:40 mm Passage

Internal bayonet mechanical level gauge cap, passage diameter 40 mm, in plastic, steel and brass, complete with different types of sealing gasket in relation to the fluid in the tank. It’s available hermetic or ventilated and in different lengths (minimum 90 mm, maximum recommended 540 mm: for longer lengths we suggest you to directly contact the Technical Office). The construction characteristics of our liquid level indicators guarantee the non-deformability of the body in which float moves. This product is proposed in five different colors (black, blue, red, green and white), not only to meet aesthetic needs, but on the basis of various necessities in different fields of application. We can supply versions with customized dials, also with your company logo or writings (“Oil”, “Diesel”, “Fuel”, “Gas” or others on request). CATEGORY:Mechanical Gauges PASSAGE DIAMETER:40 mm Passage

NTC fuel tank cap deck filler in stainless steel, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank, fuel or water. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the NTC tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We supply this cap equipped with stainless steel safety chain. The NTC tank plug shall be sold complete with flanged filler neck to be screwed on boats and inflatable boats. All metal components are in stainless steel, suitable for nautical applications. PASSAGE DIAMETER:40 mm Passage

ASM.OB fuel tank cap, in aluminium or steel material, with internal bayonet coupling, passage diameter 30 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.OB tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply versions equipped with safety chains or cables and with customized writings, company logos and drawings. This product shall be sold with our bayonet filling systems passage 30 mm. ASM.OB is used particularly for fuel and oil tanks. in many applications of different industrial sectors PASSAGE DIAMETER:30 mm Passage

G2 fuel tank cap in galvanised steel and stainless steel material, with external bayonet coupling passage diameter 38 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. It can be supplied, at your request, equipped with safety chains or cables. This product shall be sold with our external bayonet filling systems passage 38 mm. The G2 fuel tank has several applications in building and agricolture field: on wheel loader, tractor, excavator, earth moving machineries, trucks, garden machines, motor pumps, motor mowers, air spraiers and irrigator machines. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. PASSAGE DIAMETER:38 mm Passage

Fixed mechanical level gauge in plastic, steel and brass, with different types of sealing gasket in relation to the fluid in the tank. It’s available hermetic or ventilated and in different lengths (minimum 90 mm, maximum recommended 540 mm: for longer lengths we suggest you to directly contact the Technical Office). The construction characteristics of our liquid level indicators guarantee the non-deformability of the body in which float moves. We can supply versions with customized dials, also with your company logo or writings (“Oil”, “Diesel”, “Fuel”, “Gas” or others on request). The new dial with 4 colors (green for full tank, red for reserve and black for intermediate levels, on white background) allows an optimal visualization of the fluid level in the tank. This mechanical liquid level gauge can be used with different inclinations up to the maximum recommended angle to the vertical of 20°. CATEGORY:Mechanical Gauges COUPLING:Fixed Level Gauge

240 RCM spare cap with key for camper, caravan and motorhome in steel and stainless steel material, with internal bayonet coupling passage diameter 40 mm and aluminium reduction flange, suitable for diesel, gasoline and water tanks. We supply this cap in stainless steel, black or microplate with aluminum effect and, on request, with fixed code double key, for opening more caps with the same key. The 240 RCM spare cap is combined with our aluminium reduction flange, which allows an easy and quick replacement of the existing loading system, without having to modify the wall panels of the camper, caravan and motorhome. The following video shows the sequence of the substitution phases: Versions with ventilated cap, ventilated with valves or hermetic are available. Our vent connection can be mounted on the loading system, according to your specific requirements. List of components included in kit with reduction flange: Cap 240 series PASSAGE DIAMETER:40 mm Passage

Combined fixing plates in steel or galvanised steel, to be welded or directly screwed on tanks of industrial machines or generating sets. The use of this fixing plates make easier and very faster the assembling operations of our fixed mechanical level gauge in combination with our bayonet tank cap passage diameter 40 mm. Combined fixing of tank cap and fixed level indicator allows to easily monitor the liquid level in the tank during the refueling. We also supply versions of single fixing plates and fixing plates for electronic level indicators or to connect flexible fuel filling hoses of various diameters. The careful selection of raw materials and the adoption of innovative and rigorous production processes allow us to always guarantee quality and reliability of our product. We perform several strength and durability tests and tests for product quality control during the various processing phases. CATEGORY:Other Components