Izdelki za dobavitelji gumbov (11)
Priponke za Priključitev za Foto in Reklamne Vstavke - Model 57 Okrogel
Einlagenmaß: 57mm. Anstecknadel.
Kremenov Kristal - 5MHz Kristali
Maximum stability in demanding applications
The standard AT-cut, 1 in. (25.4 mm) diameter crystal, pioneered by INFICON, is used primarily in research applications with the INFICON RQCM (Research Quartz Crystal Microbalance). These research crystals are designed for use with INFICON rugged, easy to use crystal holders and are used for in-situ monitoring of deposited films or liquids.
Geometry
AT-cut quartz has superior mechanical and piezoelectric properties. The 1 in. (25.4 mm) diameter allows optimal distance between the active area of the crystal and the mounting o-ring. This improves the overall stability of the crystal by reducing the frequency changes due to mounting stress.
Finish
INFICON 1 in. (25.4 mm) research crystals are available with either an unpolished or polished finish. Polished crystals allow for a good correlation between theory and measurement during liquid immersion experiments.
Electrode Material
INFICON 1 in. (25.4 mm) research crystals are available...
Frequency Range:4.976 - 5.020 MHz
Resistance:~10 Ohms
Crystal Diameter:1 in. (25.4mm)
Crystal Contour:Plano-Plano
Crystal Orientation:AT-Cut, for frequency stability over temperature
Compatibility:INFICON/Maxtek liquid probes and crystal holders
Front Electrode Diameter:0.5 in. (12.7 mm)
Packaging:Individually packaged/sold
Crystal Thickness:0.013 in. (333µm)
Surface Roughness:50 Å(polished)
MIKRO INJEKCIJSKO VBRIZGAVANJE - storitve
Micro injection molding Large series mass production is standard at starlim//sterner’s. Component weight goes down to 10 mg. Silicone components with a weight of below 10 mg are subjected to other physical laws. This is why starlim//sterner defines such products as "micro molding" parts. General definition of micro-injection molding The term comprises today 3 classes of components: Micro injection parts with micro structured areas (CD, "plastic-wafer", ... ) Micro injection parts or micro molded parts weighing a few milligrams (micro housings, watch hands, ...). Micro shaped components with tolerances and minimum dimensions in the µ range (gear wheels for watches, …). Range of starlim//sterner micro-injection molded parts Micro-silicone components below 10 mg with very precise undercuts and depressions Single and multi-component injection moldings Parts removal via Handling-Robot Optical monitoring of quality during processing Orientated parts depositing Optional: all activities are c
Klešče za stiskanje
En plus des composants spécifiques à nos emballages, nous fabriquons des composants adaptés à d’autres emballages : boites carton, étuis, …. Et nous pouvons en créer de nouveaux (ou ajuster les existants) si vos spécificités sont différentes.
