Izdelki za feroli mavca (8)

Quickly binding building gypsum for direct application. It is used for filling holes, mounting electrical installations, skimming rough coatings, or other proper substrates with normal bearing capacity. Application: • Fixing of electrical cables • Suitable for complete skim coating • Suitable for bonding gypsum ornaments Advantages: • Compatibility with all types of masonry and concrete works • Excellent adhesion • High resistance • Fast gathering of strength • Easy and effective work TECHNICAL INFORMATION: Mixing Ratio Coverage Consumption Bags per pallet Pallet weight (gypsum/water) 5 kg 1/0.55 ~ 5 m2/ 5 kg 1 kg / m2 / 1 mm 120 pcs 600 kg 25 kg 1/0.55 ~ 25 m2/ 25 kg 1 kg / m2 / 1 mm 40 pcs 1000 kg Sizes (kg):5 / 25

Tufo cm.5x25x50 (pz.120) Tufo cm.8x25x50 (pz.96) Tufo cm.10x25x50 (pz.80) Tufo cm.15x25x50 (pz.48) Tufo cm.20x25x50 (pz.40)

Our calcium bolus Calcitop is a fast-acting calcium supplement designed to solve a calcium deficiency (hypocalcemia) around calving. This deficiency will cause a lower feed intake and milk production and could potentially lead to (subclinical) milk fever. Especially from the second calving and later cows are sensitive to it. You can read everything about milk fever on our blog.

Grundsätzlich arbeitet AGK mit hochtemperaturbeständigen Werkstoffen. Im Kunststoffbereich sind dies duroplastische Werkstoffe, die bis zu einer Grenztemperatur von ca. 300°C einsetzbar sind und dabei gleichzeitig formstabil bleiben. Dies ist bei Thermoplasten grundsätzlich nicht so, da sie sich unter Druck verformen. Sie zeigen ein konstruktiv unerwünschtes Fließverhalten. Allerdings gibt es auch qualitativ hochwertige Thermoplaste. Trotzdem kann die AGK - als spanender Bearbeiter - selbstverständlich diese Werkstoffe bearbeiten. AGK - Werkstoff "KU" Thermoplastische Kunststoffe mit hoher Verschleißfestigkeit und geringer Gleitreibung sind die Hochleistungskunststoffe, die unsere duroplastischen Werkstoffe ergänzen. So erhalten Sie bei uns: Polyvinylidenfluorid (PVDF), PolyetheretherKeton (PEEK), Polytetrafluorethylen (PTFE (Teflon)), Polyphenylensulfid (HPV PPS), Polyimid (PI), Polyetylen (PE), PA (Polyamid), PP (Polypropylen), POM (Polyoxymethylen, Polyacetal), und Metall -...

Propylen, Herstellung von Plastiktischen, -stühlen, Herstellung von Plastikküchengeschirr, Ringherstellung, Automobilindustrie, Herstellung von Plastikkoffern, Bauindustrie (Isolierung, Häkeln, Matten, konische Füße usw.), Eimer, Es wird in Blumentöpfen und verschiedenen Bereichen der Spielzeugindustrie verwendet. Monomer von Propylen Polypropylen wird durch Polymerisation chemischer Lösungsmittel gewonnen. Es ist extrem beständig gegen (Säuren und Basen). Wir haben natürliche, milchweiße und farbige Sorten im Angebot. Die Färbung erfolgt auf Anfrage.

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Tungrit, ein Wolfram Granulat, ist im Plansee Online Shop verfügbar. Für chemische Analysen oder als Ausgleichmasse ist das Tungrit Granulat genau die richtige Wahl. Einfach und schnell im Onlineshop des Herstellers bestellen: www.plansee.com/shop

Vermiculite Platten sind Hochtemperatur-Wärmedämmplatten auf Basis exfolierter Vermiculite und anorganischen Bindemitteln. Das Material ist frei von Asbest und organischen Substanzen. Vermiculit ist ein Aluminium-Magnesium-Schichtsilikat, das durch Erhitzen zu ultraleichten Granulaten aufbläht und durch ein Pressformverfahren zu Platten, Steinen und Formteilen verarbeitet wird. Werkstoff (Hauptbestandteil):Exfoliertes Vermiculite mit anorganischen Bindemitteln Anwendungstemperatur:bis 1100°C Materialstärke:20 - 50 mm Format:600 x 1000 mm (andere Ausführungen auf Anfrage) Dichte:500-1000 kg/m³ Druckfestigkeit:1,2 - 6,1 MPa Biegefestigkeit:0,5 - 2,0 MPa Wärmeleitfähigkeit:0,09 - 0,18 W/mK Farbe:braun/beige Aufmachung:Plattenware und Formteile