Izdelki za in varno (25)

Le nouveau Liquiphant FTL51B est spécialisé dans l'industrie de process et déjà développé selon IEC 61508 pour être utilisé directement dans des applications SIL2 et SIL3 sans gros efforts. Vous réalisez des tests de fonctionnement périodiques selon SIL ou WHG par smartphone ou tablette avec un assistant intuitif. A la fin, vous recevez une documentation automatisée. Le Liquiphant mesure avec fiabilité et est insensible aux fluctuations des propriétés du produit, au débit, aux turbulences, aux bulles de gaz, à la mousse, aux vibrations et au colmatage.

Nova Swiss check valves ensure an ideal degree of leak-tightness for both gases and liquids thanks to the use of bonded metal/plastic seats. Our check valves are characterized by excellent flow rates and maximum reliability — both at low and high pressures. The replaceable seats allow simple and cost-efficient maintenance. Our high and low-pressure check valves are supplied complete with screw fittings.

For dependable and reproducible hydrogenations Buchi gas dosing system bpc 2 in combination with Buchi pressure reactors creates an optimal solution for safe, accurate and reproducible hydrogenations. The Buchi hydrogenator is a turnkey hydrogenation solution, consisting of: bpc 2 (Buchi pressflow controller) for hydrogen dosing, control of reaction pressure and continuous measuring of the Hydrogen uptake until saturation Buchi pressure reactors, offered in different materials and volumes for high to low pressure applications The unique volumetric hydrogen gas dosing records the parameters pressure, momentary consumption and overall consumption. The optional bls3 allows Operation of the apparatus via PC and storing or recorded data for further analyses.

DCS supports the safe collection and disposal of suctioned fluids. • Low noise emission significantly reduces disturbance in the operating room. • The one-piece liner is simply placed in the canister. • Closed system with built-in safety features: high-flow bacteria (99.999% retention) and overflow filter, smoke pre-filter and patient backflow valve. • Only two liner sizes and thus reduced logistical requirements. • Optional solidifier models eliminate the risk of spilling and may reduce cost of disposal Medela DCS - SAFETY MADE EASY Capacity:1.5l and 2.5l Liner Material:Polyamide/Polyethylene Filter:Integrated overflow protection Areas of use:With Medela suction pumps, wall vacuum systems according to ISO 10079-3 Types:with and without solidifier

Die KASAG Doppel-Kippstation mit integrierten Wäge-Zellen garantiert ein einfaches Handling von Containern. Damit möglichst wenig Restprodukt im Container bleibt.

SMARTCOLLECT is a data management software for easy and safe measured data acquisition as well as data analysis focussing on energy management. SMARTCOLLECT acquires, stores, visualises, evaluated as well as automatically reports all relevant consumption data of power, water, gas or heat. A modern graphic user interface permits intuitive and easy operation even in numerous measuring points. Functions and measuring points may be very easily supplemented at any time due to the modular design.

The front-flush pressure transmitters of the 35X-Ei series use digital compensation with a mathematical model to achieve exceptional accuracy of 0,05 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable, analog current or voltage output. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…0,3 to 0…1000 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @ -10…80 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:-40…120 °C

Sichere Lösungen für das Management von belasteter Abluft, die insbesondere in Laboratorien, in der Galvanik-, Prozess-, Öko- und der Lebensmittelindustrie benötigt werden. Die Sena Plastics bietet ihren Kunden sichere Lösungen für das Management von belasteter Abluft, die insbesondere in Laboratorien, in der Galvanik-, Prozess-, Öko- und der Lebensmittelindustrie benötigt werden. Wir verfügen über eine grosse Fachkompetenz in der Herstellung und Montage von Kunststoffrohren für chemische Flüssigkeiten (ultrarein, giftig, korrosiv usw.). Je nach den Einsatzbedingungen können verschiedene Kunststoffe verwendet werden PVC, PP, PE, PVDF, E-CTFE, PFA oder im Werkstoffverbund Beispiel PVC-GFK / PVDF-GFK.... Unsere Leistungen: Auswahl von Materialien und Installation nach Flüssigkeitswiderstand, Temperatur, Druck und Volume. Lieferung, Verlegung und Installation von Rohrleitungen innen und aussen Stumpfschweissen / Muffenschweissen / Elektromuffe / Extruder

Bremsbeläge sind ein kritischer Bestandteil eines jeden Fahrzeugs und tragen maßgeblich zur Verkehrssicherheit bei.

Il nuovo Liquiphant FTL51B è specializzato per l'industria di processo ed è già stato sviluppato in conformità a IEC 61508 per l'impiego diretto in applicazioni SIL2 e SIL3 senza sforzi eccessivi. Eseguite facilmente verifiche funzionali periodiche secondo SIL o WHG da dispositivo mobile, con una procedura guidata intuitiva. Al termine della verifica, riceverete automaticamente la documentazione.", "Liquiphant esegue misure affidabili e non subisce l'influenza dei cambiamenti delle proprietà dei fluidi, di flusso, turbolenze, della presenza di bolle di gas, schiuma, vibrazioni o depositi.

Switch de detección de nivel con IIoT para aplicaciones con todos los líquidos - El nuevo equipo Liquiphant FTL51 se ha diseñado especialmente para la industria de procesos y se ha desarrollado conforme a IEC 61508 para usarlo directamente en aplicaciones SIL2 y SIL3 sin grandes complicaciones.Efectúa tests de prueba periódicos conforme a SIL o WHG simplemente desde un dispositivo móvil con un asistente de manejo intuitivo. Al finalizar recibe la documentación de manera automática., Las mediciones de Liquiphant son fiables y no son afectadas por propiedades cambiantes del producto como caudal, turbulencias, burbujas de gas, espuma, vibraciones o adherencias.

The new Liquiphant FTL51 is specialized for the process industry and already developed according to IEC 61508 to be used directly in SIL2 and SIL3 applications without big efforts. You conduct periodic proof tests according to SIL or WHG simply mobile with an intuitive wizard. At the end you receive an automated documentation., Liquiphant measures reliably and is not affected by changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

Poste de basculement de conteneurs pour une manipulation sûre Le double poste de basculement KASAG avec cellules de pesage intégrées assure une manipulation de conteneurs simple afin de minimiser les résidus dans les conteneurs.

Das DCS Einweg-Auffangsystem bietet durch sein durchdachtes Design ein sicheres und benutzerfreundliches Sekretmanagement. • Geringe Geräuschemission reduziert Störungen im Operationssaal erheblich Mit 50 dB sind Medelas Auffangsysteme bis zu viermal leiser als vergleichbare Produkte. • Der Beutel ist in Sekundenschnelle einsatzbereit im Behälter • Geschlossenes System mit Bakterienfilter (99,999% Filterleistung), Überlaufschutz, Rauchgasfilter und Rücklaufventil. • Nur 2 Beutelgrössen helfen den logistischen Aufwand zu reduzieren. • Die Modelle mit Geliergranulat vermeiden das Verschütten von Sekret und können Entsorgungskosten minimieren. Medela DCS - SICHERHEIT LEICHT GEMACHT Kapazität:1.5l und 2.5l Beutelmaterial:Polyamide/Polyethylene Filter:integrierter Überlaufschutzfilter Anwendungsbereiche:Mit Medela Absaugpumpen oder Wandvakuumsystemen gemäss ISO 10079-3 Varianten:ohne und mit Geliergranulat

Die KASAG Glovebox dient dazu, während sterilen Prozessen Handhabungen und Kontrollen durchzuführen. Die Handschuhbox mit Einführschleuse verfügt über ein Rüttelsieb und wird zum Einfüllen von pulvrigen Produkten in Säcke eingesetzt. Die KASAG Sackbegasungskammer wird für das sterile Verschliessen von Produkten in Säcke verwendet. Dazu wird in der Kammer die Luft entzogen (Vakuum) und anschliessend mit Stickstoff überlagert. Der Apparat entspricht strengsten Hygieneanforderungen. Die Aufhängung kann leicht an die Sackgrösse angepasst werden.

The pressure transmitters of the 4LD-Ei series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…3 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ 0…50 °C Interfaces:I2C Dimensions:⌀ 11 mm x 4,2 mm

The pressure transmitters of the 7LHPD-Ei series for high pressure applications use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…400 to 0…1000 bar Accuracy:±0,15 %FS Total Error Band:±1,0 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 15 mm x 8 mm

The pressure transmitters of the 25Y-Ei series with a front-flush separating diaphragm are designed for elevated requirements in industrial applications and are supplied with a G1/2" male pressure port. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…0,5 to 0…1000 bar Accuracy:±0,25 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:4…20 mA, 0…10 V Temperature Range:-40…100 °C

The pressure transmitters of the 9LD-Ei series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…1 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 19 mm x 5 mm Temperature Range:-40…110 °C

The differential pressure transmitters of the PD-39X-Ei series measure the pressure difference indirectly using two absolute pressure sensors. The dual-sensor design with numerical differential formation also outputs the line pressure values via the digital RS485 interface and guarantees a high overload resistance. The additional analog current or voltage output is primarily used to output the differential pressure range, which is freely rangeable within the line pressure range. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…3 to 0…300 bar Accuracy:±0,05 %FS Total Error Band:±0,1 %FS @ -10…80 °C Temperature Range:-40…90 °C Line pressure:0…3 to 0…300 bar Interfaces:RS485, 4…20 mA, 0…10 V Special characteristics:Line pressure measurement

The 9FLD-Ei series is a special version of the 9LD-Ei pressure transmitter. The flanged housing can be mounted using an O-ring or welded on. As with all D-line products, the chip-in-oil technology developed by KELLER is used here, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy.The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…1 to 0…30 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 17 mm x 5,5 mm

The pressure transmitters of the 6LHPD-Ei series for high pressure applications use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Inconel. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…400 to 0…1000 bar Accuracy:±0,15 %FS Total Error Band:±1,0 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 13 mm x 8 mm

The capacitive pressure transmitters of the 41X-Ei series are designed for measuring relative pressure values in the mbar and µbar range. They use digital compensation with a mathematical model to achieve an accuracy of 0,1 %FS – in the temperature range from 10 to 40 °C, this value even corresponds to the total error band. In addition to the digital RS485 interface, the X-line transmitters have a rangeable analog current or voltage output. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…0,03 to 0…0,3 bar Accuracy:±0,1 %FS Total Error Band:±0,2 %FS @ 10…50 °C Interfaces:RS485, 4…20 mA, 0…10 V Temperature Range:-20…80 °C

The pressure transmitters of the 23SY-Ei series are designed for elevated requirements in industrial applications. Thanks to its modular concept, this series is highly flexible and makes it possible to realise customer-specific requirements in very little time. The sophisticated compensation circuit makes it possible to specify a narrow total error band. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…0,1 to 0…1000 bar Accuracy:±0,25 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:4…20 mA, 0…10 V Temperature Range:-40…100 °C

The pressure transmitters of the 7LD-Ei series use the chip-in-oil technology developed by KELLER, uniting a pressure measuring cell, digital temperature compensation and signal processing in a compact housing made of stainless steel or Hastelloy. The transmitters are extremely resistant to environmental influences and delivery highly accurate measurement results as a digital output signal. The I2C interface and the low supply voltages make it easy to integrate in microcontroller-based systems. The extremely low power consumption is ideal for battery-operated devices. The D line is perfect for IoT solutions. Intrinsically safe – suitable for use in explosive atmospheres. Pressure Ranges:0…3 to 0…200 bar Accuracy:±0,15 %FS Total Error Band:±0,7 %FS @ -10…80 °C Interfaces:I2C Dimensions:⌀ 15 mm x 5 mm