Izdelki za in varno (16)

If you are looking for the ideal solution to protect your home or office, we at Alaia Serramenti srl have the right product for you. In our headquarters in San Cipriano d'Aversa, in fact, we design and manufacture high-quality, resistant and long-lasting armored roller shutters, which are fully capable of resisting break-in attempts and protecting your assets from possible thieves or malicious people. Furthermore, our armored roller shutters perfectly protect the environments where you live and work from external noises and atmospheric agents, thus greatly increasing the comfort of the spaces where they are installed.

Valvola a sfera a passaggio totale, filettatura M/F, con leva in alluminio.

MOD. 63

TUBO PA12 HIPHL 15x12,5x1,25 MM Materiale:PA12 Tipo:HIPHL Diametro:15x12,5

Thixotropic, structural, fibre reinforced cement mortar with high intrinsic watertightness, and extraordinary physical and mechanical characteristics: adhesion to concrete, adhesion to steel, compression resistance, flexural strength, abrasion resistance. Perfect for remediation of structural works and articles in degraded concrete and very high performance coatings. Thanks to the very high adhesion to steel and concrete supports, it is also suitable for fixing threaded bars in holes made on concrete or rock conglomerates. Apply with brick trowel and plastering trowel. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic watertightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It is fibreglass reinforced three-dimensionally, it provides high adherence and adhesion; and dimensionally stable (shrinkage-compensated). The product is mixed with water (approx. 16% of the weight of the bag). Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. For wet spritz beton operations it is advisable to use the Repar Tix HG SB mortar, which maintains the physical and mechanical characteristics of Repar Tix HG, but is specially formulated for the maximum performance of sprayer machines. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. The addition of Bond HG to the mixing water (about 0.5 litres per 25 kg bag of product) allows further improvements in terms of adherence, adhesion, watertightness, workability, moldability and deformability. For high coating thicknesses, static, monolithic requirements, etc., performed with Repar Tix HG, appropriate metal reinforcements (mesh, cages, etc.) should be used, anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2, or with the same Repar Tix HG. Approximately 18,5 kg/m² of Repar Tix HG for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre).

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

Valvola a sfera in acciaio inox AISI 316-CF8M, filettatura F/F, a passaggio totale. F/F Gas utilizzo con solventi Limiti di temperatura:-20° +160° Vuoto:10-2 torr

Valvola a sfera a passaggio totale, filettatura F/F UNI 10226, con leva in alluminio.

Valvola a sfera a passaggio totale, filettatura F/F, con leva in acciaio.

TUBO PU 98 SH 3x1,5x0,75 MM Materiale:PU Tipo:98 SH Diametro:3x1,5 Colore:Neutro, Azzurro

MOD. 330

Valvola a sfera per scarico caldaia nichelata, filettatura maschio, con cappuccio quadro, tappo e catenella. Limiti di temperatura:-20°C +160°C

Valvola a sfera a passaggio totale, attacco tubo rame, con leva in acciaio. Limiti di temperatura:-20°C +160°C

MOD. 230

MOD. 52

MOD. 270