Izdelki za industrijski čistilni stroji (3)

The machine is designed for cleaning and degreasing of engine blocks, gearboxes, and other machine parts. The dimension of the engine block 2500x950x800 mm and load capacity max. 2500 kg. The parts are placed on a mobile table, which is positioned in front of the machine and via a mechanical actuator, the board of the table moves inside. The cleaning is carried out by three nozzle collectors – two fixed and one movable. The machine has a mud sump and oil separator. The mud sump catches gross dirt larger than 1.5 mm. The band oil separator is designed for separation of the oil from the washing solution. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations. Max Dimension of the parts::2500 x 950 x 800 mm Load capacity::2500 kg

The machine is designed for cleaning and degreasing of machine parts and components. The components placed in the rotating basket, which can have a diameter of 800, 1000 or 1200 mm. By rotating of the basket the components are washed with washing solution. The machine can be with or without insulation, sensors for level-and temperature controls, mud sump or oil separator. The mud sump is welded to the machine’s corpus. The washing solution flows from the tank into the mud sump and catches the gross dirt. The purified solution flows from the mud sump in the tank. The oil separator designed for separation of the oil from the washing solution. The oil is separated as a surface layer, which is collected in a special bath and discharged out of the chamber. The skimmed fluid is returned to the tank. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- a

The machine is designed for cleaning, degreasing, chemical treatment of the outer layer and blowing of small components. The parts are arranged in trays with dimensions 600x400x70-150 mm. Two washing zones – pre-washing zone and zone for main washing. After each washing zone there is zone for blowing. The pre-washing zone has an external band filter, which is with the possibility of processing a high volume of washing solution and captures particles of a size greater than 350 μm. The band filter cleaning the washing solution of oil and hard dirt. The mainly washing zone has a column bag filter, which captures particles of a size greater than 50 μm. Both filters have monitoring systems for the degree of soiling and in case of clogging the machine stops. Automatic dosing of the cleaning agent. Machine corpus made entirely out of stainless steel, material No. 1.4301. The machine complies with the high CE-Requirements and EU- and USDA regulations.