Izdelki za jeklena jekla (110)

Load capacity: 15 kN test load EN 124. Material: Frame made of 2 mm cold formed precision steel profiles. Hot dip galvanised. Durbar-plate cover. Features: Sealed cover, flat design. EPDM seal. Opening tool included. Applications: For pedestrian use inside buildings and their surroundings, particularly for inspection chambers. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Installation height ≈ 6 cm Special sizes possible *S = available from stock *O = to order

entsprechend EN10210 bzw. in Anlehnung an DIN 2395, Ausführungen: warmgefertigt und kaltgefertigt. aus warmband oder kaltband sowie in edelstahl rostfrei. Nahtlose Maschinenstahlrohre 20MnV6 nach ISO mit eingeschränkten Toleranzen Anarbeitung: sägen, drehen, fräsen, bohren, rollieren, honen Oberflächenbehandlungen: verchromen, vernickeln, verzinken Wärmebehandlungen: glühen, vergüten, normalisieren, einsatzhärten, nitrieren Portfolio: Kesselrohre Nahtlose Präzisionsstahlrohre nach DIN 2391 Nahtlose Hydraulikleitungsrohre nach DIN 2391/C Zylinderrohre Kolbenstangen Kolbenrohre Gebohrte Rohre ROHRE VIERKANT Stahlbau Hohlprofile nach EN 10219 + 10210 Formrohre nach DIN 2395 Handelslängen: 6 lfm,12lfm

s = 2 - 20 mm nach EN 10088 -3 Produktpalette: Flach aus Blech auf der Schere geschnitten s = 2 - 20mm Flach aus Blech gesägt s = 10 - 100 mm Flach gewalzt, gezogen, geschliffen Rund gewalzt, gezogen, geschliffen Quadrat gewalzt, gezogen, geschliffen Winkel gewalzt, gezogen, geschliffen

Load capacity: pedestrian Material: Frame fabricated from rolled sections, durbar-plate cover. Hot dip galvanised. Features: Simple durbar-plate pedestrian area cover with recessed fastener. Non-sealed cover. Lifting key included. Applications: For simple covers used subordinately.

Load capacity: 250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete. Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the...

Load capacity: 125 kN test load EN 124. Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Insulated version, consisting of: Z-brackets, EPDM seal, polyurethane rigid foam insulation panel coated with aluminium on both sides. Thermal resistance = 3.2 m2 K/W Thermal coefficient 0.3 W/m2 K (=RC Warde) Features: Sealed cover with inlaid insulation panel. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV thermo cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For areas inside buildings where a cover with insulation properties is required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding...

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C 35/45 concrete (EN 206) Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Sealed cover with 10 cm deep recess. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement, crosswise welded. Opening tool included. The Lift-Off opening system: Every HAGODECK Type BVH-maxi steel cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings and their surroundings. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 10.2 cm Installation height ≈ 12.5...

Load capacity: 125 kN test load EN 124 when completely filled with concrete C35/45 (EN 206-1). Material: In Type BV-RA frame, cover and cross-beam in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. In Type BVE-RA frame, cover and cross-beam made of grade 304 stainless steel (on request also available in grade 316 stainless steel). EPDM seal. Features: Smell proof, largely water-tight multi-part cover (Not guaranteed to be completely water-tight). The cross-beams can be removed without tools, to give clear access to the entire duct. This gives clear access to the duct when retrofitting pipes or during repair work. Versions: In addition to the standard cover height (approx.50 mm), a deep cover version (approx. 100 mm) is available. Ideal for infill with paviors. The Lift-Off opening system: Every HAGODECK Type BV(E)-RA cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the...

Load capacity: pedestrian Material: BV-shallow: frame and cover in 2mm cold formed precision steel profiles, hot-dip galvanised. BVE-shallow: frame and cover made of grade 304 stainless steel. Features: Sealed. Cover with an installation depth of only 5 cm. Particularly suitable for situations where greater installation depth is not available. Since the cover is shallower, this means that it is not so heavy when filled in - so less effort is required to lift the cover. The bottom of the cover is reinforced. EPDM seal. Tapered design allows easy opening. Steel reinforcement guarantees good adhesion between the concrete infill and the bottom of the cover. The Lift-Off opening system: Every HAGODECK Type BV(E) shallow cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For pedestrian use inside buildings and their surroundings. Installation: Installation must...

Die KMH GmbH bietet Systemlösungen für Energieversorgungsunternehmen und für die Industrie an.

The robust building material can be processed so flexibly that it can be used in almost every industry - whether in house, bridge, roof or road construction. When it comes to recycling, durability and stability, steel is way ahead, which is why it is our first choice for demanding constructions.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof (not guaranteed to be completely watertight). Virtually invisible when installed. EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GDZ cover can be opened and closed by one person. Central locking system: HAGODECK Type BV-GDZ steel cover is equipped with a central locking system. The cover can be opened from above using a special socket key and easily unlocked from underneath using the built-in handle. Safety device fitted to prevent the open cover from closing. Applications: For covers that need to be opened from above and below, quickly and without particular effort, e.g. in underground passageways, in underground railways, power stations, telecommunication or military facilities...

Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Accurately manufactured sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BV steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where sealed covers are required. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Special sizes possible *S = available from stock *O = to order

Load capacity: 400 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section and additional frame. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-400 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, or for secondary traffic areas. Particularly suitable for use in areas where forklifts operate. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation heights: up...

Load capacity: 125 kN test load EN 124 Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Standard version (not sealed). Type B should only be used where the “sealed” characteristic is not required. Tapered design allows easy opening. Virtually invisible when installed. Robust steel mesh reinforcement, crosswise welded. Opening: Every HAGODECK Type B steel cover comes with a set of lifting keys and precise installation instructions. Applications: Inside buildings over sealed inspection fittings or installations where a fully sealed cover is not needed. Installation: Installation must be carried out according to our instructions.

Ein Teil unserer Edelstahl-Produkte wird in der Trinkwasser, Lebensmittel- sowie Chemieindustrie eingesetzt.

Stainless steel stop with plastic reinforcement Extruded aluminum impact plate with rubber Easy right/left conversion Innovative Quick-Fix fastening Adjustable for 40-60 mm gate profiles For rectangular and round profiles

Zerkleinern von Stahl- und Eisenteilen mittels Autogentechnologie EINSATZBEREICHE DER BRENNSCHNEIDANLAGE Unser Service kommt überall dort zum Einsatz, wo das Zerkleinern von Stahlteilen mittels Autogentechnologie nötig ist. Neben der klassischen Zerkleinerung von Schrottteilen zum Einsetzen in Öfen ist zum Beispiel auch das Brammenquer- oder -längsteilen einer von vielen Einsatzbereichen unserer Brennschneidanlage. BEISPIELHAFTE BRANCHEN: Stahlwerke Gießereien Recyclingbetriebe Schrotthändler Demontagefirmen

von 20 x 10 x 1 - 120 x 80 x 5 (HF) Produktpalette: Rundrohre geschweißt von 10,0 x 1,0 - 406,4 x 3,0 (HF, TIG, Laser) Quadratrohre von 15 x 15 x 1 - 100 x 100 x 5 (HF) Rechteckrohre von 20 x 10 x 1 - 120 x 80 x 5 (HF) Die Palette wird ständig erweitert und ergänzt.

Diese Formrohre haben durch uns den richtigen "Sitz" bekommen.

Stainless steel cable with a rated capacity of 1500 kg in case of hinge failure 300 mm long, 5 mm thick with 1 mm thick transparent protective cover Securely attached thanks to the patented Quick-Fix system In accordance with EN 12604 For gates up to 500 kg Easy installation guaranteed

Mobile Brennschneideanlagen für schweren Stahlschrott werden eingesetzt in Stahlwerken, Gießereien, Recyclingbetrieben, Demotagefirmen und bei Schrotthändlern. Unsere Anlagen kommen überall dort zum Einsatz, wo das Zerkleinern von Stahlteilen mittels Autogentechnologie nötig ist. Neben der klassischen Zerkleinerung von Schrottteilen zum Einsetzen in Öfen ist zum Beispiel auch das Brammenquer- oder -längsteilen einer von vielen Einsatzbereichen unserer Brennschneidanlage. BEISPIELHAFTE BRANCHEN: Stahlwerke Gießereien Recyclingbetriebe Schrotthändler Demontagefirmen DIE BRENNSCHNEID­ANLAGE FÜR SCHWEREN STAHLSCHROTT Die Autogenschneidanlage entspricht allen Anforderungen an den Umweltschutz und sorgt für einen sicheren und komfortablen Arbeitsplatz für den Bediener.

Load capacity: 125 kN test load EN 124. Material: Grade 304 stainless steel. Passivated after welding. Also available in grade 316 stainless steel on request (no stock item). Features: Accurately manufactured fully sealed access covers. Tapered design allows easy opening. Virtually invisible when installed. EPDM seal. The Lift-Off opening system: Every HAGODECK Type BVE stainless steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings or their surroundings, where exceptionally high standards are needed or where the hygienic properties of stainless steel are preferred, e.g. in the food industry, in meat-processing areas, dairies, hospitals, swimming pools. For indoor swimming pools only use grade 316 material! Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal...

Stahlkragen in Flachdecken und Fundamentplatten zur Erhöhung des Durchstanzwiderstandes unabhängig von Stützenabmessungen oder Stützenart. Mit DIBt-Zulassung und Bemessung durch Spannverbund Bausysteme GmbH. Flexibel im Grundriss: Für Innen-, Rand- und Eckstützen, Wandecken und Wandenden Schnelle und sichere Montage: Montage in einem einzigen Vorgang Reduktion und Vereinfachung der Plattenbiegebewehrung: Mitwirkung bei der Aufnahme der Plattenbiegemomente Flexible Leitungsführung: Möglichkeit von Deckendurchbrüchen in Stützennähe Robust: Feuerwiderstand inklusive Sicher: Hunderttausendfach bewährt Bemessungshilfen: Online-Rechner und Vorbemessungstabellen auf unserer website Service: Bemessung durch Spannverbund Bausysteme GmbH

Hot-dip galvanized mounting plate 2 stainless steel screws M16 x 32 mm Suitable for the hinges 4D16 and 4D20

Material: Steel-plate cover, frame made of cold formed sections. Hot-dip galvanised. With hinge. Cover can be removed from the open position. Covered hasp locking device (padlock not included). Ventilation pipe (Ø 10 cm) fitted with cowl and insect-excluding mesh. Sealed with hollow chamber seal. Applications: For individual wells, spring water catchments, high-level tanks etc. Total height including ventilation cylinder ≈ 30 cm. *S = available from stock *O = to order

Große praxiserprobte Modellvielfalt in 3, 4, 5 und 6 mm Drahtdurchmesser für Tunnelfinisher, Kleiderausgabeautomaten sowie Sortieranlagen. Gefertigt aus hochqualitativem Edelstahl. Edelstahlkleiderbügel für Textilreinigungsbetriebe Edelstahlbügel 4mm, mit Funktionskleme und Verkeilssperre, Schulterauflagen aus Edelstahl 16mm breit, fix mit Bügel verbunden. Barcodehalter U-44 für Tunnelfinisher, Kleiderausgabeautomaten sowie Sortieranlagen.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...