Izdelki za jeklena jekla (400)

Grâce à la diversité de ses 3 laminoirs, NLMK Europe Plate offre l’une des plus grandes gammes d’épaisseurs d’aciers de construction des secteurs suivants: terrassement, mines et carrières, construction mécanique, charpente métallique, réservoirs de stockage de pétrole et de gaz, éolien énergie. Egalement disponible: aciers de découpe laser, aciers à résistance améliorée à la corrosion atmosphérique et tôles de plancher.

Thanks to the diversity of its 3 rolling mills, NLMK Europe Plate offers one of the largest ranges of thicknesses of structural steels in the following sectors: earthworks, mining and quarrying, mechanical engineering, steelwork, oil and gas storage tanks, wind energy. Also available: laser cutting steels, steels with improved resistance to atmospheric corrosion and floor plates.

NLMK Plate Europe offers high quality steel tubes for sour or mild service applications. The plates are thermomechanically rolled to improve mechanical properties. They are suitable for onshore, deepwater pipelines and fittings.

NLMK Europe Plate est un fournisseur historique de plaques pour l'industrie de la construction navale. Il les produit conformément aux normes nationales et internationales pertinentes (Lloyd’s Register, Bureau américain de la marine marchande, Bureau Veritas, DNV GL, RINA, Registre maritime de la Russie, ASTM A 131, etc.).

NLMK Europe Plate is a historical supplier of plates for the shipbuilding industry. It produces them in accordance with the relevant national and international standards (Lloyd's Register, US Bureau of Shipping, Bureau Veritas, DNV GL, RINA, Russian Maritime Register, ASTM A 131, etc.).

Our carbon and alloy steels enable manufacturers to produce large high-pressure vessels. Our range varies from medium-thickness plates produced by NLMK Clabecq or NLMK DanSteel A/S to very thick bars forged by NLMK Verona. They meet the requirements of a variety of relevant national and international standards.

These fine-grained, high-strength steel grades are characterized by their good weldability and high resistance to brittle cracking. They offer excellent cold forming properties and are often used for special applications at low temperatures (-20 °C and below).

Large gamme de nuances : Acier résistants à l’abrasion : HB 400, 450, 500 ; Hardox, ROC, Creusabro,... 1.4301 (304/304L) ; 1.4404 (316/316L) ; 1.4571 (316TI) ; 321 (1.4541), 1.4406 ; 1.4542 ; 1.4021 ; 1.4439 (317L) 1.4539 (904L, UB6) ; 1.4529 (S31254) 1.4828 ; 1.4833 (309, 309S), 1.4841 ; 1.4845 (310, 310S) ; 1.4878 (321H) ; 1.4550 (347, 347H) 1.4462 (UNS S31803) ; 1.4410 ; 1.4501 (UNS S32750, S32760) Inconel 600, 601 et 625 (2.4816, 2.4851, 2.4856) ; Incoloy 800 et 825 (1.4876 ; 2.4858) ; Hastelloy C276 (UNS N10276) S235JR ; P355GH ; P 235GH, P 265GH, P295GH

Ons assortiment telt 15 000 artikelen, waaronder: RVS buizen 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Rondstaven van roestvrij staal 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 - Gelaste en niet gelaste buizen van roestvrij staal 904L 1.4539 UB6 - Massieve rondstaven van roestvrij staal UB6 904L 1.4539 - Vuurvaste buis en rondstaf 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex buizen UNS S31803 1.4462 - Super duplexbuizen UNS S32750 S32760 1.4410 1.4501- Massieve duplex- en super duplexrondstaven 1.4462 1.4410 1.4501 - Roestvrij plaatstaal 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541- Vuurvaste plaat 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplexplaten UNS S31803 1.4462 - Super duplexplaten UNS S32750 S32760 1.4410 1.4501- Platen van roestvrij staal UB6 904L 1.4539 - Buizen van legeringen 600; 601; 800; 825 - Hastelloy C276 - Buizen en platen 2.4816; 2.4851; 2.4856; 2.4360 - Flenzen van roestvrij staal duplex super duplex 904L UB6 1.4539

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Quend® is an extra high strength structural steel with yield strengths between 700 and 1100 MPa. It is used for lightweight applications having to withstand high loads. Like Quard®, the Quend® plates are produced at NLMK Clabecq, where they are treated in a state-of-the-art Quenching and Tempering unit. Applications : Crane booms, truck chassis, trailers, stabilising support, undercarriage, etc. Thickness: Quend 7004-64 mm Quend 9004-35 mm Quend 9604-30 mm Quend 11004-12 mm Width : 1500-3100 mm Quend is extra high-strength structural steel produced as quenched and tempered. WORKABILITY Easier to process The way of making our steel slabs, of rolling our plates and heat treating them gives to Quend (and Quard) specific mechanical properties that leads to a superior workability. From the cutting till the machining, surveys prove that our material gets the preferences in the workshops for their excellent behaviour. Q-Calculator: optimize the parameters

Our large range of tool and engineering steels can easily combine toughness with conditioning, shaping and cutting. All these steels respond adequately to your needs of manufacturing hard and resistant tools and moulds. Whether you need them to withstand impact loading or to enable sharp cutting edges, they are made to ensure performance and durability. As a result of the right balance in alloys, our tool steels support high temperature without deformation. Their structure enhances their polishing properties. We can deliver quality tool steels as blocks (raw or machined) or as round bars (raw or peeled). Our extremely large range of thickness renders steels that meet your highest expectations. Applications : Plastic molding dies, die-casting die blocks, blanking and stamping dies, metal cutting tools, extrusion tools, hammers and sledges, etc.

Standard : EN 10028-2 / EN 10028-3 / EN 10028-4 / EN 10028-5 ASTM/ASME Our carbon and alloy steels are especially designed to produce large high-pressure vessels. These steel grades are characterized by yield strengths from minimum 235 N/mm² to maximum 460 N/mm² and by good weldability. The fine-grain structural steel grades are suitable for mechanical forming and excellent welding. We deliver these steels as heavy plates or bars, as well hot rolled and forged, so we can cover a wide range of thicknesses and widths. Our specialists can coordinate for you the steel preparation at all stages, to enable you to get your pieces ready to use. Applications : •storage tanks, storage spheres •pressure vessels •boilers •heat exchangers •gas turbines •etc…

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 5-3 mm

Nez Conique À Souder Inox Poli

Coude 90° Inox Poli

Regard À Souder Inox Poli

Nez Fileté À Souder Inox Poli

Tableau en acier 1,5mm

En acier inoxydable 316 L - A utiliser de -40°C à +400°C - < -45°C : interdit Chaîne de levage en acier inoxydable de 0,7 t à 2,7 t Les chaînes de levage sont souvent utilisées afin de fabriquer des élingues. Pour la composition d’une élingue chaîne, il est primordial de...

Nos aciers à haute teneur en carbone se caractérisent par leur plus grande dureté et leur bonne usinabilité.

Ces nuances d'acier à grain fin et à haute résistance se caractérisent par leur bonne soudabilité et leur grande résistance à la fissuration fragile. Ils offrent d'excellentes propriétés de formage à froid et sont souvent utilisés pour des applications spéciales à basses températures (-20 ° C et moins).

Té Court À Souder Inox Poli

Inox 316L Poli/Gepolijst Inox 304L Poli/Gepolijst - Sur demande/Op aanvraag

Large gamme de nuances : 1.4301 (304/304L) ; 1.4404 (316/316L) ; 1.4571 (316TI) ; 321 (1.4541), 1.4406 ; 1.4542 ; 1.4021 ; 1.4439 (317L) 1.4539 (904L, UB6) ; 1.4529 (S31254) 1.4828 ; 1.4833 (309, 309S), 1.4841 ; 1.4845 (310, 310S) ; 1.4878 (321H) ; 1.4550 (347, 347H) 1.4462 (UNS S31803) ; 1.4410 ; 1.4501 (UNS S32750, S32760) Inconel 600, 601 et 625 (2.4816, 2.4851, 2.4856) ; Incoloy 800 et 825 (1.4876 ; 2.4858) ; Hastelloy C276 (UNS N10276) S235JR ; P355GH ; P 235GH, P 265GH, P295GH

Diese Standardtanks aus unserem Bestand wurden in unserer Werkstatt wie folgt ausgestattet: - Steinwollisolierung mit Aluminiumverkleidung. - Käfigleitern. -Sicherheitsgeländer mit Plattform. -Verschiedene Anschlüsse und Rohre innerhalb und außerhalb des Tanks.

Diese Standardtanks aus unserem Bestand wurden in unserer Werkstatt wie folgt ausgestattet: -100 mm Rockwool-Isolierung. -Verschraubte Zierscheide aus Aluminium. -Verschiedene Anschlüsse.

Key Steel flat, drawn, tol. acc. to DIN 6880, grade 1.4571, 6-4 mm

Chez STAPPERT, les produits sont mis aux dimensions selon vos exigences dans nos propres centres de coupe. - Coupe de tubes: Tolérances serrées + / – 0,3 mm jusqu’à 625 mm de diamètre Dimensions de 4 x 0,5 mm à 609,5 x 4 mm Longueur de 20 à 4000 mm - Coupe de barres rondes Tolérances serrées + / – 0,75 mm jusqu’à 625 mm de diamètre Diamètre de 2 à 625 mm Longueur de 20 à 4000 mm Une question ? Notre équipe se tient à votre disposition pour y répondre