Izdelki za jeklena jekla (684)

500 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Doppio riporto di cromo 25µm+25µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

ART. 804 CERNIERE EXTRAPESANTI IN ACCIAIO ZINCATO – perno levabile Confezione:12 Dimensioni (mm):90 x 90 x 2,5 Pollici:3 ½ x 3 ½

One space high grounded-based bike conjuction rack in galvanized steel, silver color, without caps. Upper curve is a patented design by ANDRYS srl to set even the disk brake bikes. SKU:Art. 1201 C-B Weight:2,5 kg Dimensions:38,5 × 42 × 41 cm Size:38.5 x 42 cm h 41 cm

Readymesh MS-350 Carbon steel fibres, with a profile for improved adherence to the dimensional reinforcing, structural, of concretes in general. The addition of Readymesh MS-350 allows for considerably increasing the mechanical performance of the product in relation to tenacity, ductility and resistance to fatigue, the resistances to the dynamic stresses, the mechanical tensile and bending behaviour, even post-crack, and resistance to impact and wear. Production of grouts and fibre-reinforced concretes in general, sprayed structural concretes (shotcrete). In addition, due to their contained length, the fibres Readymesh MS-350 are particularly suitable for the production of pre-cast blocks. The Readymesh MS-350 fibres will be added to the project concrete, during the mixing of the same. It is advisable to apply the fibres directly on the load tape in the concrete mixing plant, during the loading phase of the aggregates. Alternatively, you can insert them directly into the truck mixer at the end of the loading of the concrete. In this case, mixing should be extended for at least one minute for each m³ of packaged concrete in order to achieve optimum dispersion of the fibres themselves. The dosage of steel fibres may vary depending on the final use from a minimum of 15 kg/m³ to a maximum of 75 kg/m³. Conglomerates with Readymesh MS-350 can be easily transported and placed on site using pumps, shotcrete machines, pavers, road extruders (type "slip form paver") etc. ; the carbon steel fibres Readymesh MS-350 can be added to the mixture during both the packaging phase and when the mixture is ready. Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit: €/kg

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake Description:Tiltable bucket 1000 liters Dimensions (mm) LxWxH:1190x1650x1080 Load:Kg. 800 Capacity:1000 Lt.

Galvanized chain for better resistance to corrosion and external agents Each reel is supplied in a single neutral box Used for any type of fastening in construction, agriculture, mechanics and industry The meters per reel vary in relation to the diameter of the wire N°/mm:14/2.2mm N°/mm:15/2.4mm N°/mm:17/3.0mm N°/mm:18/3.4mm N°/mm:19/3.9mm N°/mm:20/4.4mm N°/mm:21/4.9mm N°/mm:23/5.9mm N°/mm:25/7.0mm N°/mm:27/8.0mm N°/mm:30/10.0mm

For more than 60 years we have been manufacturing ‘RAPID SANITARIA’ series sanitary Electric Pumps, with flexible elastomer impeller and AISI 316L stainless steel pump body Advanced Solutions for Fluid Product Transfer With the Rapid Sanitaria series stainless steel Electric Pump, we offer advanced technology that guarantees maximum reliability in the handling of fluid, semi-fluid and dense products in the food, pharmaceutical and cosmetics industries. The main Technical Features of the Rapid Sanitary series stainless steel electric pump The Rapid Series sanitary electric pump is characterised by a robust and advanced design. The AISI 316L stainless steel pump body, obtained from solid bar, guarantees perfectly smooth and compact surfaces without porosity. The flexible elastomer impeller contributes to the versatility of the pumps, which can successfully handle products of different consistencies. Equipped with high self-priming power, it does not need to fill the suction hose the first time it is used, and thanks to its reversibility it can reverse direction for maximum flexibility in transfer operations. Easy disassembly allows for quick and frequent maintenance, contributing to the pumps' durability and efficiency. Sanitary patent for Food, Pharmaceutical and Cosmetic Sectors We have patented the SANITARY execution of Rapid series Electric Pumps, meeting the specific needs of the food, pharmaceutical and cosmetics sectors. This execution eliminates any parts that could cause product stagnation and potential sources of contamination. The internal body of the Pump is a perfectly smooth single body, made from solid bar by turning and milling, allowing CIP (clean in place) flushing. The impeller and seals made of white silicone or black FDA Neoprene are certified for use in contact with foodstuffs, according to FDA regulations, EEC Directive 89/109 and EC Regulation 1935/2004. The ‘RAPID SANITARIA’ series includes models with flow rates from 240 to 24,000 litre/hour, up to 3 Atm. of head pressure. Standard couplings are with hose nozzles, but can be customised with couplings such as TRI-CLAMP, DIN, GAS, FLANGE ATTACHMENTS. A motor protection cover in AISI 316L stainless steel is available on request.

Magnetic Flipchart Boards are a versatile and mobile solution for presentations and meetings. These boards feature a magnetic surface that is easy to write on and erase, making them perfect for brainstorming sessions and interactive discussions. The flipchart holder allows for the attachment of paper pads, providing additional space for writing and drawing. Equipped with wheels for easy mobility, these boards can be moved effortlessly between rooms and locations. The adjustable height and sturdy construction ensure comfortable use and long-lasting performance. Whether you're conducting a training session or leading a team meeting, Magnetic Flipchart Boards offer a practical and efficient way to present and share information.

Contatta l’azienda per saperne di più sulle coclee in dotazione.

Controllore adattivo da 7'' touch screen. Costruzione interna ed esterna in acciaio inox AISI 304. Piedi in acciaio inox regolabili in altezza. Guarnizione porta resistente alle temperature massime e minime di raggiungimento. Vano tecnico posto sotto la cella. Unità condensatrice posta nel vano tecnico, estraibile e facilmente ispezionabile. Quadro elettrico a connettori, estraibile e facilmente ispezionabile. Porta-teglie multilivello regolabile in acciaio inox AISI 304, adatto a contenere teglie GN 1/1 ed EN 60x40. Struttura facilmente removibile per operazioni di pulizia. Cella interna con angoli raggiati per facilitare le operazioni di pulizia. Isolamento in poliuretano ad alta densità senza CFC. Evaporatore con protezione antiruggine cataforesi. Cerniera porta lato sinistro. Perimetro porta riscaldato per evitare la formazione di brinaCicli a sonda: la temperatura della sonda al cuore comanda il ciclo garantendo controllo e precisione. Resa frigorifera richiesta:4452 W Linea liquido:3/8" [10] mm Linea aspirazione:1/2" [12] mm Condensazione:remoto Gas refrigerante:R452A GWP:2141 Classe climatica:4 Alimentazione (Ph / Volts / Hz):220-240/1N/50 Max assorbimento elettrico cicli freddo:370 W - 1.94 A Max assorbimento elettrico cicli caldo (optional umidità):1240 W (1240 W)

The Velati’s tilting mixer is completely made of stainless steel and it is formed by a solid basement in which is attached a mixing tank built with a double cradle. In the tank there are two mixing shafts with intersecting paddles of the same shapes and dimensions. The tank capacity varies between 300, 500, 700 or 1.100 lt. Each mixer is available also in the vacuum versions and with CO2 intake. This kind of mixer discharges the product on two or more trolleys by a tank tilting, allowing the complete recovery of raw material and a quick and easy washing of the tank itself. The mixing shaft system with intersecting paddles allows as well a rapid and safe working without smashing the product.

The mst h on40 g-1 hydro steering unit is a high-performance steering unit designed to provide precise and responsive control for various vehicles. This component is perfect for both agricultural and industrial applications, offering a reliable solution for enhancing vehicle maneuverability. Its durable construction and advanced engineering ensure long-lasting performance and reliability. With the mst h on40 g-1 hydro steering unit, users can enjoy improved steering accuracy and ease of use, thanks to its ergonomic design and intuitive controls. The compatibility with a wide range of vehicles and the straightforward installation process make it a popular choice among technicians and vehicle owners. Whether you're upgrading a tractor or an industrial vehicle, the mst h on40 g-1 hydro steering unit is the ideal choice for enhancing your steering capabilities.

Filtro estensibile in acciaio inox con pre-filtro a tutto diametro a maglia grossa. Ideale per secchielli da 25 kg e 40 kg. CARATTERISTICHE: Acciaio inox. Supporto estendibile fino a 42 cm. Diametro 24 cm. Altezza 10 cm. Codice Prodotto:818

Valvola a sfera in acciaio inox AISI 316-CF8M dotata di sfere V-Ball per regolazione di pressione e portata, con connessione organo di comando secondo ISO 5211, filettatura F/F, dispositivo antistatico. Limiti di temperatura:-20° +160° Vuoto:10-2 torr

Valvola a sfera 2 vie ricavata da massello, con guarnizioni in P.T.F.E. vergine, lucida, acciaio inox AISI 316, passaggio totale e ridotto, attacchi clamp ISO 2852, DIN 32676 TAB.4 REIHE C per tubo BS/OD (ASTM A270), con attuatore elettrico serie 85.

Nicchia da incasso serie 60 F in tecnopolimero, per aggancio tubo di carico flessibile Ø 60 mm per carburante. È possibile abbinare questo prodotto a tre nostri tappi serbatoio filettati femmina, diametro di passaggio 54 mm Tappo ALU 2″ Tappo ALU M60X2 Tappo M60X2 con chiave Possiamo produrre le nicchie da incasso in una vasta gamma di colori (nero, blu, rosso, verde, bianco) per soddisfare le più ricercate esigenze estetiche o permettere una migliore identificazione della tipologia di fluido da caricare nel serbatoio. E’ disponibile la nuova guarnizione rettangolare in NBR, studiata appositamente per tutte le nostre nicchie coniche da incasso. Questa guarnizione consente una perfetta tenuta, senza più bisogno di sigillanti o silicone, rendendo, pertanto, più rapide le operazioni di montaggio, smontaggio e manutenzione.

Tubazioni destinate all’uso oltre 1mt. dalla struttura

Valvola a sfera a squadra, filettatura maschio con attacco maschio per tubo flessibile metallico e farfalla in alluminio.

Molle a torsione

OVAL END FOR MULTI-USE TANK ALUMINIUM TANK FOR SOLAR PANELS

Fixed ladders are entirely made of isophthalic resin and fibreglass (FRP) and their wall installation is performed through FRP or stainless steel brackets. Also the screws for assembling the safety cage are made of stainless steel. Fixed ladders are of different types: 1. ladders serving machinery or plants in accordance with UNI EN ISO 14122-1/4 and tested according to UNI EN 131-2 standard; 2. ladders suitable for use in direct contact with drinking water; 3. double stringer ladders for inspection manholes with the CE marking in accordance with UNI EN 14396 standard.

La produzione Metal Leghe non è finalizzata esclusivamente agli impieghi industriali. L’azienda, infatti, vanta una grande esperienza anche nelle lavorazioni per fini civili e artistici. Vantiamo elevati standard di qualità per realizzare un’ampia gamma di prodotti: dai bronzetti di piccole dimensioni alle statue, dai monumenti ai manufatti per arredo urbano.

Professional oven electronic controls 2100/3200 Watt - 230V / 1 / 50Hz - 35 L GN 2/3 capacity - 2 Magnetron - 5 Power levels - Intermediate shelf - 10 Programmable keys - 100 Programs - Ergonomic stainless steel handle (AISI 304 ) - Internal chamber light - Timer: 60.00 - Removable HD filter

Pompe realizzate completamente in acciaio inox particolarmente indicate per impianti di refrigerazione, condizionamento, riscaldamento, chiller, sistemi di lavaggio, approvvigionamento idrico civile ed industriale, nonché nell’irrigazione. Tutte le parti in contatto con il liquido pompato son in acciaio inox Aisi 304 per garantire massima igiene e resistenza alla corrosione. Disponibili solo in versione trifase. Possibilità di attacchi filettati da 2” oppure con sistema Victaulic ®. Portate: 0 – 750 lt/min Prevalenze: 0 – 26,5 mt Potenze: 1,1 – 3 Kw Corpo pompa, giranti e diffusori: acciaio inox Aisi 304 Albero in acciaio inox AISI 304 Supporto ed involucro motore: alluminio Tenuta meccanica: Car/Cer/Nbr (standard) – Car/Car/FPM (versione H) – Sic/Sic/FPM (versione HS) – Tungsten Carb/Tungsten Carb/FPM (versione HW) 2 poli, di tipo chiuso a ventilazione esterna, classe d’isolamento F, grado di protezione IP55 Portate:0 – 750 lt/min Prevalenze:0 – 26,5 mt Potenze:1,1 – 3 Kw

Opens any type of can Easy and efficient mechanical system with pressure adjustment Reversible stainless steel blade Available with clamp locking (OXV55) or with the surface bolted to the worktop (OXP55) Bar length:55cm

Interasse 90mm, Ø 8mm Ø 9mm Nottolino Ø 7mm o Ø 6mm Scrocco reversibile in acciaio Catenaccio una mandata Frontale 235 mm Confezione: A) Sacchetto termoretraibile - B) Scatola singola Imballo: A) cartone da 50 pezzi - B) Cartone da 25 pezzi

The DRH85 is a dredge with steel cable that can be equipped with DRAGFLOW pumps HY85 or HY85HC. This dredge is flexible: it can work everywhere and in any condition, thanks to its heavy duty, robust design. The basic applications are mining, dredging, sand extraction, and other industrial applications. MAIN FEATURES Only one operator is needed to control the entire dredger from the ergonomic operator cabin. Combines a working depth of up to 250 m with small overall dimensions and draft. Assembly operation takes as short as 6-8 hours. It can be mounted in any environment and has limited mobilization costs Length:8,5 m Width:6 m

Rulli per nastri D. 400 x 1600 composti da tubo meccanico di grosso spessore e anelli

TUBO DI RAME RIVESTITO O TUBO DI ACCIAIO RIVESTITO IN "BLACK PVC" PER LA REALIZZAZIONE DI IMPIANTISTICA AUTOGAS A GPL O METANO. La tecnologia Zetaesse e la grande esperienza maturata nel settore Automotive, permettono di avere un'elevatissima flessibilità in termini di specifiche produttive, lead times, personalizzazioni e packaging dando quindi un servizio ed un'affidabilità unici nel settore. Lega:CU-DHP 99.9% UTILIZZO SPECIFICO:Impianti di alimentazione dei veicoli con combustibili a pressione metano e GPL Densità:1,70 Kg/dm3