Izdelki za jeklena jekla (357)

ART. 208 CERNIERE LEGGERE RUSTICHE IN ACCIAIO BRUNITO PER COFANETTI Confezione:100 Dimensioni (mm):45 x 45 x 0,7

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):75 x 75 x 1,0 Pollici:3

ART. 5200 CERNIERE A SCATTO A PIANI SFALSATI IN ACCIAIO ZINCATO Confezione:10 Dimensioni (mm):48 x 115

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):26 x 110 x 1,3 Pollici:4 ½

ART. 207 CERNIERE LEGGERE RUSTICHE IN ACCIAIO BRUNITO PER COFANETTI Confezione:100 Dimensioni (mm):45 x 45 x 0,7

ART. 321 CERNIERE MEZZE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):25 x 22 x 0,8 Pollici:1

ART. 5600 CERNIERE A SCATTO IN ACCIAIO ZINCATO Confezione:15 Dimensioni (mm):45 x 110

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):35 x 35 x 0,8

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 160 x 1,6 Pollici:6 ½

Readymesh MS-350 Carbon steel fibres, with a profile for improved adherence to the dimensional reinforcing, structural, of concretes in general. The addition of Readymesh MS-350 allows for considerably increasing the mechanical performance of the product in relation to tenacity, ductility and resistance to fatigue, the resistances to the dynamic stresses, the mechanical tensile and bending behaviour, even post-crack, and resistance to impact and wear. Production of grouts and fibre-reinforced concretes in general, sprayed structural concretes (shotcrete). In addition, due to their contained length, the fibres Readymesh MS-350 are particularly suitable for the production of pre-cast blocks. The Readymesh MS-350 fibres will be added to the project concrete, during the mixing of the same. It is advisable to apply the fibres directly on the load tape in the concrete mixing plant, during the loading phase of the aggregates. Alternatively, you can insert them directly into the truck mixer at the end of the loading of the concrete. In this case, mixing should be extended for at least one minute for each m³ of packaged concrete in order to achieve optimum dispersion of the fibres themselves. The dosage of steel fibres may vary depending on the final use from a minimum of 15 kg/m³ to a maximum of 75 kg/m³. Conglomerates with Readymesh MS-350 can be easily transported and placed on site using pumps, shotcrete machines, pavers, road extruders (type "slip form paver") etc. ; the carbon steel fibres Readymesh MS-350 can be added to the mixture during both the packaging phase and when the mixture is ready. Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit: €/kg

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 130 x 1,5 Pollici:5

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 140 x 1,5 Pollici:5 ½

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):22 x 60 x 1,0 Pollici:2 ½

ART. 290 CERNIERE RUSTICHE IN ACCIAIO BRUNITO PER MOBILI Confezione:24 Dimensioni (mm):70 x 110 x 1,6

ART. 323 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):50 x 30 x 0,9 Pollici:2

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:25 Dimensioni (mm):100 x 50 x 1,5 Pollici:4

ART. 15 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):40 x 40 x 1,0 Pollici:1 ½

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):30 x 20 x 0,9 Pollici: ¼

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:50 Dimensioni (mm):70 x 40 x 1,0 Pollici:2 ¾

ART. 323 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):120 x 65 x 1,2 Pollici:4½

ART. 321 CERNIERE MEZZE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):70 x 55 x 1,0 Pollici:2 ¾

Valvola a sfera a passaggio totale, filettatura M/F, con leva in alluminio.

Il bloccaggio delle fascette stringitubo intorno al gruppo di tubi o di cavi, può essere effettuato anche grazie ad una vite senza fine, che consente di ottenere una regolazione ad hoc della chiusura, in modo tale da assicurare al cliente la massima personalizzazione del serraggio ed una risposta completa e puntuale alle proprie esigenze.

Le resistenze a fascia in acciaio inox per ugelli e teste di estrusione, costruite in qualsiasi dimensione e potenza vengono utilizzate per riscaldare a contatto superfici metalliche quali piani per presse, teste di estrusione, stampi, contenitori, tubazioni.

Elementi base per il riscaldamento elettrico consentono tutti i tipi di trasferimento del calore e vengono realizzati in rame, ferro, acciaio inox, incoloy. La possibilità di ottenere le più svariate forme e dimensioni li rendono adatti a tutti i settori industriali.

Gear hobbing with special profiles and particular pressure angles, internal toothing (broaching), segment gears for the aeronautical industry, special parts for the medical devices industry and conical gears carried out with the system “Conikron”. Gears in different types of materials such as steel, stainless steel, brass, bronze, aluminium, polymers, bakelite etc… On request, we can supply a finished product complete of thermal and surface treatments. Gear cutting of outer diameters from min. 3mm to approximately 50mm carried out in automatic unmanned mode and manual gear cutting up to a max. length of approximately 100mm. Max. Length of parts subject to gear cutting: approximately 100mm. We can also supply oriented-toothing, synchronized toothing and crown gears. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders.

For more than 50 years we have been building ‘RAPID’ series Electric Pumps, with flexible elastomer impeller and AISI 316L stainless steel pump body Maximum Efficiency and Temperature Control in Fluid Transfer The ‘RAPID TERMICA’ series is at the forefront of the fluid transfer sector, integrating the established performance of the ‘RAPID’ series with an innovative temperature control system. Thanks to the presence of a heating and cooling chamber, the RAPID TERMICA series is ideal for handling and transferring products that need to maintain specific temperatures, both hot and cold, throughout the entire transfer process. The main Technical Specifications of the Rapid Termica series stainless steel electric pump The stainless steel heating/cooling chamber surrounds the pump body and for temperature modulation of the liquids present also allows the use of steam. The flexible elastomer impeller, together with the AISI 316L stainless steel pump body machined from solid bar, ensure perfectly smooth, porosity-free and highly corrosion-resistant surfaces Versatility and Regulatory Compliance Impellers are available in a variety of materials, from food-grade white SILICONE and FDA-certified NEOPRENE (CR) to DUTRAL (EPDM) and NITRILE (NBR), to suit the different requirements of the products handled. Each material is chosen to optimise performance in relation to the type of Adaptability, Power and Ease of Maintenance Like all electric pumps in the ‘RAPID’ series, the THERMAL model is equipped with a standard fixed speed motor (1400, 900 or 700 rpm), with the option of a speed variator or servo-ventilated motor for inverter application. These features make the pumps ideal for the gentle transport of dense or viscous products. The series offers models with flow rates ranging from 2,700 to 24,000 litres per hour, providing great versatility for every industrial need. In addition, the ease of disassembly and maintenance simplifies frequent servicing while maintaining operational efficiency. A Reliable Solution for Every Need With its self-priming capacity and reversibility, the ‘RAPID TERMICA’ series stands out for its efficiency and user-friendliness in a wide range of industrial applications. The wheeled version, with full electrical system, reversing switch and emergency button, offers additional mobility and safety. The possibility of customising the connections, from standard hose connections to DIN, GAS, TRI-CLAMP, and flange connections, allows perfect integration into any system. The ‘RAPID TERMICA’ series is the optimal choice for those seeking the ultimate in efficiency, reliability and temperature control in fluid handling and transfer.

We have all the spare parts for a rapid assistance service for Electric Pumps for industrial use and stainless steel plate filters Innovation and Control for Dense and Viscous Products The RAPID VER Series represents a further evolutionary step in the range of our stainless steel electric pumps for the handling of dense and viscous liquids, food and non-food. Based on the solid construction foundations of the ‘RAPID’ and ‘RAPID SANITARIA’ series, the Ver series is equipped with an electronic inverter with a removable keypad that allows differentiated adjustment of the product flow, even remotely. This device enables an adaptive response of the electric pump to the specific needs of extremely dense and viscous products up to 90,000 cps, such as mayonnaise, jam, honey, custard and a variety of creams and gels for cosmetic and food use. By modulating the motor speed according to the characteristics of the product, the inverter optimises the transfer process and prevents the risk of cavitation and the formation of air bubbles, guaranteeing better quality when transferring dense and viscous products. The main Technical Specifications of the Rapid Ver series stainless steel electric pump The AISI 316L stainless steel pump body, obtained from solid bar by turning and milling, ensures perfectly smooth, compact and porosity-free internal surfaces, ideal for maintaining the highest hygienic standards and enabling effective CIP (clean in place) cleaning. The flexible impeller and elastomer seals, available in various materials, including white SILICONE and black FDA NEOPRENE, certified for food contact according to FDA regulations, EEC Directive 89/109 and EC Regulation 1935/2004, emphasise the adaptability of these pumps to a wide range of applications in the food, cosmetics and pharmaceutical sectors. Operational Versatility and Customisation With flow rates of up to 45,000 litre/hour and up to 3 Atm of head pressure, the 'RAPID VER' series is suitable for various production requirements. The standard equipment includes connections with hose connection, with the possibility of customising the connections with solutions such as DIN, GAS, TRI-CLAMP and FLANGED CONNECTIONS, thus responding to specific installation requests. With its self-priming capacity, reversibility and ease of maintenance, the 'RAPID VER' Series emerges as the ideal solution for handling dense and viscous products, ensuring efficient, reliable transfer that meets the highest standards of quality and hygiene.

The new ‘HRS’ series electric pumps are the first with a flexible impeller and drainage system for sanitisation. Ideal for food and pharmaceutical applications The HRS Series stainless steel sanitary electric pump is the new frontier of innovation and hygiene in electric pumps for food and pharmaceutical applications From 2020, the ‘HRS‘ series joins the previous ‘RAPID’ and ‘RAPID SANITARIA’ series with which we have been present on the market for electric pumps for over 50 years. With its flexible impeller equipped with a drainage system for automatic sanitization, the HSR Series stainless steel sanitary electric pump introduces a new standard. It is the first flexible impeller pump with a drainage system for automatic flushing, without the need for disassembly. It was awarded the European patent in 2023. The distinguishing element of this series is its ability to guarantee a superior level of hygiene in the transfer processes, which is why we chose the letter ‘H’ – HRR series – of ‘HYGIENIC’ as the product’s distinguishing element. Certified Materials for Food Use and Innovative drainage system Impeller and seals of the HRS Series are made of Silicone or FDA Neoprene, materials certified for use in contact with foodstuffs. The HRS Series drainage system is particularly innovative as this equipment handles not only liquids, but also dense and viscous fluids. All the surfaces involved in the transfer are touched by the washing liquids, making it possible to use the same pump both for the transfer and for the washing operations of the system.

NC gear hobbing with standard profiles XL, MXL, T, HTD, GT or special profiles manufactured with special purpose tools. Production of items, which are normally in aluminium, available also in brass, steel or polymer. On request: Galvanic treatments such as anodizing, phosphating, nickel-plating etc… Gear cutting of outer diameters from min. 6mm to approximately 50mm in automatic unmanned mode. Max. Length of parts subject to gear cutting: approximately 100mm. Our company can manufacture small, medium-sized and large productions batches by means of chutes and automatic loaders. We can deliver finished products complete with belt containment flanges.