Izdelki za jeklena jekla (61)

Filo in acciaio inox 500 g adatto all'armatura dei telai da nido e da melario. Codice Prodotto:506

Prova A) - arma, canna manometrica cal. 5,56 x 45, cartuccia, SMI munita di proiettile blindato tipo FJ/PB/ SCP1 da 4,0 gr (SS109); - V 7,5 media dei proiettili 950m/sec; - E 7,5 media dei proiettili 1.85 Joule; Prova B) - arma, canna manometrica cal. 7,62x 51; - V 7,5 media dei proiettili, 843 m/sec; - E 7,5 media proiettili, 3.372 Joule. Peso totale piatto:2,100 Kg

Semi-automatic sealless steel strapping tool, with pneumatic tensioning and manual sealing of the strap. It requires a flat support surface with a minimum length of 200 mm. For use with glossy or blue strap from mm. 13 to mm. 19 with a maximum thickness of 0.60 mm. The holding capacity of strap dipends on material type to strap and on strap choice. Model:ST IMA DP Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,4 - 0,6 Joint type:Sealless Weight:Kg 5,3

High quality / price ratio and Italian materials of certified quality. The Fornara line of fittings for multilayer pipes focuses on these characteristics with solutions for different types of systems: from drinking water and heating to compressed air distribution systems.

Connessione diretta alla centrale. Elettronica resinata. Segnalazione acustica e luminosa. DGLP X Policarbonato. DGLI X Acciaio Inox. DGLP (L x W x D): 103 x 81 x 23mm. DGLP FN (L x W x D): 139 x 41 x 23mm. DGLI (L x W x D): 97 x 76 x 20mm. DGLIF (L x W x D): 140 x 35 x 21.5mm. Tecnologia: 125 kHz. Lettore Multi Cards. Montaggio da applicare (ideale porte a vetro). Il DFP è un bi-adesivo per nascondere il retro del lettore quando viene usato su porte a vetro. In questo modo si può utilizzare lo stesso lettore sia in Entrata che in Uscita. Alimentazione:12V dc Assorbimento:100mA

Filo in acciaio inox 1 kg adatto all'armatura dei telai da nido e da melario. Codice Prodotto:526

Ideal for safely storing gas tanks. Welding system certified UNI EN ISO 3834-2. The tank is equipped with: Hinged door with anti-intrusion closure Galvanised roof Tanks inner hooking in chequer plate steel Modular structure Ramp access in sheet metal Safety labelling Dimensions:mm 1120x945x2120h Capacity:9-12 cylinders Load:190 Kg

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420x70/130(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

This unit was designed and built for protection of workstations mobile or permanent on the battlefield or in defense of sen- sitive targets, air-transportable as it is of limited weight and size. Aimed at the protection of operators armed. Front tilted 30 degrees with 8 mm x 70 mm slots suitable for hooking the side panels. Side panels dimensions 1000 x 1000 mm base 900 mm hypotenuse 970mm. Certification: Banco Nazionale di Prova per le Armi da Fuoco Portatili e per le Missioni Commerciali: - Prot. N°22/BAL-AG/vp February 23, 2010. Bullet ballistic resistors 5.56 x 45 SS109 + 7.62x51 Nato. Weight :88,00 kg Hooks:SNAP A BAYONET Color painting: NATO green RAL 6020, - RAL 1002, - other colors on request

Leva in acciaio inox con sperone. Questo tipo di leva ha quattro funzioni: - Scalpello su un'estremità. - Gancio stacca favi sull'altra. - Sperone. - Foro per estrarre i chiodi. Codice Prodotto:211

Leva in acciaio inox con doppio scalpello, gancio e foro per estrarre il chiodo. Codice Prodotto:210

Coglilarva in acciaio inox con due punte di precisione di qualità professionale con una maniglia zigrinata per raccogliere in modo accurato e confortevole le larve delle api e 2 punte diverse. Codice Prodotto:902

GALVANIZED PALLET BOX FOR GAS CYLINDER STORAGE The galvanized cylinder pallet allows the storage of up to 12 cylinders in a vertical position. It is equipped with lifting hooks with cranes and safety stickers already included. To facilitate the loading of the cylinders there is a folding platform in embossed plate. The cylinders are held in place by a bar that can be lifted and locked using a steel pin. Capacity:12 cylinders Dimensions (LxPxH):mm. 1030x860x960 Finish:Hot-dip galvanizing

Manual steel strapping tool, lightweight and sturdy, with sealless joint. Suitable for medium/heavy duty packages with flat surface for supporting the tool. It can be also used on packages with irregular shape, however a flat surface with a minimum length 150 mm is needed. Works with glossy or blue strap mm. 13-16-19 with thickness max. 0.6 mm. The holding capacity of strap dipends on material type to strap and on strap choice Model:TP-SL 200 (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Sealless Weight:Kg 3,45

Multifunction scales with fully stainless steel structure with degree of protection IP65, suitable for being used in humid environments. Equipped with waterproof keyboard immune to dust and splashes with diplay 18 mm LCD backlit 4-digit legible. The weighing plate measuring 210x210 mm and is easily washable. Power is supplied via external network power supply included or rechargeable batteries (not included). Weight about 3 kg. FUNCTIONS AVAILABLE: Tare M + weighted summation Total weighted MR Units External calibration AutoFF Signal Low Battery Example model:FPAGS6 Load :6 kg Standard division :0,2 g Division CE-M:2 g Dimensions :mm. 310x220x75h Autonomy:100 hours (80 with backlight)

TILTING BUCKET IN POLYETHYLENE FP-BE 1000 WITH CAPACITY 1000 LT. Tipping container made of sturdy polyethylene and forkable steel base with forklift truck, it allows the transport and unloading of scraps and scrap operating in safe conditions. The bucket is secured to the forks of the forklift truck by means of the supplied chain and to carry out the overturning it is sufficient to operate the release lever directly from the driver's seat of the forklift truck (by means of a rope) and therefore to operate in maximum safety. The tipping container is complete with polyurethane wheels with brake and gas shock absorbers to control the tipping speed Features - Rotational molded monobloc container (robust, handy and light) - Double wall with cavity, smooth interior and rounded edges - Reinforced base with ribs - Forked structure built with galvanized steel - N° 2 gas shock absorbers and end-of-stroke device for progressive tipping - N° 2 fixed wheels and 2 swivel wheels with brake Description:Tiltable bucket 1000 liters Dimensions (mm) LxWxH:1190x1650x1080 Load:Kg. 800 Capacity:1000 Lt.

Lift height mm 1500/2000. Stainless steel version. Forklift with manual operation and battery-lifting, with aluminum upright to guarantee lightness and great maneuverability. The frame is made of AISI 304 stainless steel and the thermoformed ABS hood guarantees hygiene and safety in hazardous environments. Practical and handy it is very useful for lifting loads up to 100/200 kg to a height of mm. 1500 or 2000, depending on the model. Depending on the optional mounted, it can be used to lift boxes, moving coils or hook products with "GX hook". The low structure allows it to fit under standard pallets and reach reels or boxes positioned in the center of the pallet. It comes complete with two 12 V/40 Ah batteries. Example model:BIG 100/150 INOX Load:100 Kg Lifting height:1500 mm Riser height:1920 mm Batteries:2x12 V/ 40 Ah Dimensions:560x1000x1950 mm

ACCUMULATION ROTATING TABLE IN STAINLESS STEEL AISI 304 The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packs, facilitating the sampling operations by the operator. The stainless tables are available with rotating table diameter from mm. 800 to 1400 mm and exist in concave or convex version (ideal for bags and products that are accumulated) and flat (ideal for bottles, cans and products that can spill). The tables are supplied with adjustable feet up to 40 mm. On request it is possible to have wheels with brakes. Edges and sides stainless steel version The flat stainless steel version is equipped with containment rod while the concave tables do not have containment systems as the products accumulate in the center. The models in flat version can be equipped with double-rod containment, closed side with height 50 cm, exit slide, load system for incoming products Table top diameter:mm. 800-1000-1200-1400 Variable speed:from 4 to 9 rpm/min Installed power:Kw. 0,18 Power supply:380V three-phase Standard height of the top with adjustable feet :mm. 810 (+/- 40 mm)

Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with width of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm. The load varies mainly depending on the width of the plan.

Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase. Extendable roller :Galvanized steel wheels with ball bearings Bearing structure :Galvanized steel Supports (STD) :Adjustable in height da mm. 650 a 900 Wheels :In rubber with diameter mm. 80 with brake Roller type :2 modules - minimum length 1000 - maximum length 3000 - 3 supports Roller type :3 modules - minimum length 1400 - maximum length 4500 - 4 supports Roller type :4 modules - minimum length 1800 - maximum length 6000 - 5 supports Roller type :5 modules - minimum length 2200 - maximum length 7500 - 6 supports Roller type :6 modules - minimum length 2600 - maximum length 9000 - 7 supports Orderable width (mm):500 - 650 - 800 Capacity (Kg/mt) :30

SHELVES WITH TANKS LIQUID WASTE SERIES FPB801/802 Modular system consists of a structure in tubular steel, a collection tank and a floor grid support. The tubular structure is available in versions for single or double barrel and it is stackable, making it possible to safely store up to 4 drums. Containers of liquid pollutants must be stored safely, in particular to prevent any contamination of aquifers. The collection tanks are watertight, coated with epoxy powders and the support surface is grilled galvanized. Warning: prices are valid for the individual modules to be combined. Example model:FPB801 ARTICLE:Single shelf SIZE LxPxH mm.:880x785x910 FINISH:Painted CAPACITY:300 Kg.

2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. Sealing bars length:mm 600 Number of bars:2 laterals Vacuum pumps:40 mc/h Work cycle:about 30 sec Useful width:mm 530 Useful lenght:mm 620 Useful heigth (chamber + lid):mm 160/250

Powerful stapler made of high quality steel for staples with length of up to 14 mm. Suitable for intensive use on fabrics, heavy fabrics, leather, etc. power regulation equipped in 3 levels which allows to simply and rapidly increase power when required. Specially designed to reduce the effort of the arm and the fatigue even after several hours of work. This model is compatible with staples series 13 with lenght of 6-8-10-14 mm, total width of 10,65 mm, section 0,50x0,75 mm. Used staples:steel staples serie 13 Staples lenght:from mm 6 to mm 14

Pneumatic strapping tool with seal for flat and round packages. Suitable for strapping round packages and goods with small contact surfaces. Rugged, lightweight, compact, it is suitable for medium/light applications. Available in three versions: 1500N - 3000N - 4500N. Works with glossy or blue strap from mm. 13 to mm. 19 with max. thickness of 0.6 mm. The strap held depends on the type of material to be strapped and the strapping choice. Model:MOD. ST 13-16-19 Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 0,6 Joint type:Seal overlap - length mm. 24 Weight:Kg 4,5

STAINLESS STEEL MANUAL PALLET TRUCK MOD. FPGS25-I - CAPACITY 2500 Kg. The FPGS25-I hand pallet truck is built with an electropolished AISI 304 stainless steel structure and is therefore suitable for use in the food, pharmaceutical or chemical industry or in humid or saline environments. The internal pump is made of brass with excellent resistance to humidity and oxidation. It is a robust and versatile model that is suitable for handling pallets and pallets even with heavy weight. This model is characterized by: - Structure in AISI 304 stainless steel sheet - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings. Load :Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Max. fork height (h3):mm. 115 Min. fork height (h13):Min. fork height (h13) Total lenght (l1):mm. 1550 Rudder height (h14):mm. 1160 Front wheels material:in nylon Rear rollers material:nylon/stainless steel

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

FLG SERIES AUGER DOSING SYSTEM FOR POWDERS Vertical augervolumetric dosingfor non-sliding powdersuch as flour, cocoa, sugar, ground spices, coffee, finely ground, chemicals, premixedbuilding,ice creamor sorbet, etc. Capacity from 100 to 5000 ml - Rugged stainless steel with basic overview - Product loading hopper in stainlesssteel AISI304 with inspection hatch - Start with electric-operated pedal - Electrical panelwith PLC Example model:FLG-2000A Power :1200 W Packing Capacity :200-2000 ml Capacity :6-8 bags/min

1 frontal seal bar 400 mm, vacuum pump 20 m³/h. Also available with MAP - VACUUM PACKAGING MACHINE IN STAINLESS STEEL WITH TROLLEY Vacuum packaging machine with front sealing bar and stand on wheels, made of stainless steel (AISI 304), with digital panel and volumetric electronic sensor for the steady control of vacuum. Tank increased with concave bottom and convex cover for a working height of 230 mm in the central part. Vacuum pump 20 m³/h. It ensures a high productivity. Vacuum machines can be equipped with gas inlet system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of sealing bar:1 front Sealing bars length:mm 400 Vacuum pump:20 m³/h Work cycle:about 30 seconds Useful lenght:mm 420 Useful width:mm 500 Useful height (chamber + lid):mm 100/230

The series of mesh containers with tight mesh are suitable for the transport of products in supermarkets, department stores, laundries, hotels, etc. The mesh of the walls with dimensions mm. 50 x 50 prevents leakage of the product. Equipped with three or four walls bolted to the base and fixed to each other with clamps. STEEL BASE: Base wire and steel pipe complete with wheels polypropylene (2 fixed and 2 swivel) mm. 106x 40 mounted on bearings with roller cages (flow x wheel Kg. 150) Mesh of shoulder mm: 50x50 h Mesh of base mm: 56x107Soldering at 360 ° on the wires Tubes reinforced in the shoulders Thick materials more 'solicited 5 holes for drainage ROLL CONTAINER MESH 50x50 with 3 or 4 WALLS AVAILABLE IN: CP 04.A0 base 500 x 800 height 1800 mm CP 04.A6 base 600 x 600 height 1800 mm CP 04.A1 base 600 x 800 height 1800 mm CP 04.A2 base 700 x 800 height 1800 mm CP 04.A4 base 600x1200 height 1800 mm CP 04.A3 base 800x1200 height 1800 mm Example model:CP 04.A0 Capacity:Kg 600 Base:500x800 mm Shoulder mesh:mm. 50x50h Wheel type:Polypropylene 2 fixed and 2 swivel External dimensions:500x790x1785h mm Finish:Bright zinc chrome plating

Manual strapping tool for flat surfaces (sealless), easy and reliable to use in heavy industrial duty applications. Version equipped by steel made tension lever and rear feedwheel protection. It requires a flat surface with a minimum length of 150 mm. Works with glossy or blue steel strap from mm. 13 to mm. 19 with thickness up to 0.70 mm. The tightness of the seal depends on the material type and the strapping choice. Model:ST IMA G (13-16-19 mm) Strap width:mm. 13 - 16 - 19 Tickness strap:mm. 0,45 - 7,0 Joint type:Sealless Weight:Kg 4,5