Izdelki za jeklena jekla (292)

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):63 x 35 x 1,0 Pollici:2 ½

ART. 15 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):30 x 30 x 0,8 Pollici:1 ¼

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:120 Dimensioni (mm):20 x 20 x 0,7 Pollici:¾

ART. 206 CERNIERE LEGGERE RUSTICHE IN ACCIAIO BRUNITO PER COFANETTI Confezione:100 Dimensioni (mm):23 x 39 x 0,7

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):50 x 50 x 0,9 Pollici:2

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):34 x 200 x 2,0 Pollici:8

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:25 Dimensioni (mm):120 x 65 x 1,2 Pollici:4 ½

ART. 285 CERNIERE RUSTICHE IN ACCIAIO BRUNITO PER MOBILI Confezione:24 Dimensioni (mm):70 x 40 x 1,6

ART. 15 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:50 Dimensioni (mm):70 x 70 x 1,2 Pollici:2 ¾

ART. 230 CERNIERE A NASTRO PESANTI IN ACCIAIO GREZZO, SENZA FORI Confezione:10 Dimensioni (mm):1980 x 60 x 2,0

Readymesh MF-500 "Carbon steel fibres, obtained by the cutting of metal wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MF-500 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour." General preparation of fibre-reinforced concrete and structural sprayed concrete (e.g. shotcrete). Particularly suitable for high strength industrial flooring and prefabrication. "Readymesh MF-500 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete. In this case, add the fibres a little at a time so that they are well-distributed in the cement mix and extend the mixing time by at least one minute for every 20 kg of fibres added in order to achieve optimal distribution. Conglomerates with Readymesh MF-500 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc.". Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit of Measure: €/kg

ART. 208 CERNIERE LEGGERE RUSTICHE IN ACCIAIO BRUNITO PER COFANETTI Confezione:100 Dimensioni (mm):45 x 45 x 0,7

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):75 x 75 x 1,0 Pollici:3

ART. 5200 CERNIERE A SCATTO A PIANI SFALSATI IN ACCIAIO ZINCATO Confezione:10 Dimensioni (mm):48 x 115

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):26 x 110 x 1,3 Pollici:4 ½

ART. 207 CERNIERE LEGGERE RUSTICHE IN ACCIAIO BRUNITO PER COFANETTI Confezione:100 Dimensioni (mm):45 x 45 x 0,7

ART. 321 CERNIERE MEZZE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):25 x 22 x 0,8 Pollici:1

ART. 5600 CERNIERE A SCATTO IN ACCIAIO ZINCATO Confezione:15 Dimensioni (mm):45 x 110

ART. 317 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):35 x 35 x 0,8

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 160 x 1,6 Pollici:6 ½

Readymesh MS-350 Carbon steel fibres, with a profile for improved adherence to the dimensional reinforcing, structural, of concretes in general. The addition of Readymesh MS-350 allows for considerably increasing the mechanical performance of the product in relation to tenacity, ductility and resistance to fatigue, the resistances to the dynamic stresses, the mechanical tensile and bending behaviour, even post-crack, and resistance to impact and wear. Production of grouts and fibre-reinforced concretes in general, sprayed structural concretes (shotcrete). In addition, due to their contained length, the fibres Readymesh MS-350 are particularly suitable for the production of pre-cast blocks. The Readymesh MS-350 fibres will be added to the project concrete, during the mixing of the same. It is advisable to apply the fibres directly on the load tape in the concrete mixing plant, during the loading phase of the aggregates. Alternatively, you can insert them directly into the truck mixer at the end of the loading of the concrete. In this case, mixing should be extended for at least one minute for each m³ of packaged concrete in order to achieve optimum dispersion of the fibres themselves. The dosage of steel fibres may vary depending on the final use from a minimum of 15 kg/m³ to a maximum of 75 kg/m³. Conglomerates with Readymesh MS-350 can be easily transported and placed on site using pumps, shotcrete machines, pavers, road extruders (type "slip form paver") etc. ; the carbon steel fibres Readymesh MS-350 can be added to the mixture during both the packaging phase and when the mixture is ready. Variable according to the type of work to be carried out and/or performance to be achieved. Packaging: 20 kg bag Unit: €/kg

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 130 x 1,5 Pollici:5

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):30 x 140 x 1,5 Pollici:5 ½

ART. 330 CERNIERE LUNGHE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):22 x 60 x 1,0 Pollici:2 ½

ART. 290 CERNIERE RUSTICHE IN ACCIAIO BRUNITO PER MOBILI Confezione:24 Dimensioni (mm):70 x 110 x 1,6

ART. 323 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:24 Dimensioni (mm):50 x 30 x 0,9 Pollici:2

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:25 Dimensioni (mm):100 x 50 x 1,5 Pollici:4

ART. 15 CERNIERE QUADRE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):40 x 40 x 1,0 Pollici:1 ½

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:100 Dimensioni (mm):30 x 20 x 0,9 Pollici: ¼

ART. 10 CERNIERE STRETTE IN ACCIAIO ZINCATO – perno fisso Confezione:50 Dimensioni (mm):70 x 40 x 1,0 Pollici:2 ¾