Izdelki za jeklena jekla (95)

Automation Grade Automatic Frequency 50 Hz Voltage 380V Material Stainless Steel Capacity 100-150 kg/hr Phase Single Brand Thomson SKU:TM-FPM-005

Stainless Steel Guillemin With Locking Ring Material:stainless steel Sealing:NBR Working pressure:16 Bar Connection:Hose tail Diameter:50mm to 100mm

Stainless Steel Tank Truck Coupling Type Mk Material:stainless steel 316 Type:MK Seal:Hypalon Working pressure:16 Bar Diameter:2'' to 4''

Stainless Steel Exhaust Hose 500 Mm Bellow material:AISI 316L-DIN 1.4404-Z2CN17-12 Connection:steel weld ends Outer wall material:AISI 304-DIN 1.4301-Z6CN18-09 Safety Factor:4:1 Installation length:500 mm Temperature:-270 °C to +700 °C

Das Gehäuse des HY-T80-HX besteht aus Stahl. Der eingebaute Lüfter ist für zusätzliche Kühlung zum Schutz vor Überhitzung zuständig. Das Motherboard wird über die TLL-G-IN-Anschlüsse angeschlossen. Die Hochspannungseinheit ist gegen Leerlauf geschützt. Circuit power:220 V Working environment:von -10 bis +40 °C Output current:0,028 A Control signal:~ 5 V Response speed:≤1 s Working air humidity:90%

WATTSAN 1530 ROTATORY CABINE is a powerful fiber laser machine, also known as a tube cutter. The device is equipped with a protective cabin for safe operation, as well as a rotary device. The rotary device takes the capabilities of your equipment to a whole new level. You can use the metal cutter like a regular cutter, and in a few minutes switch to the task of cutting tubes. The protective cabin is installed on machines from 1000 watts. This ensures the safety of the laser cutting operator, as well as minimizes the dangers of external influences. The machine is equipped with a fiber optic emitter: Max or Raycus or IPG. Such an emitter will last up to 100 000 hours of the most intensive work. If we talk about the intensity of work — the stand is weighted, crushes vibrations and will last 20 years, according to the manufacturer's information.

Stainless Steel Tank Truck Coupling Cap Type Vb Material:stainless steel Type:VB Working pressure:16 Bar Diameter:2'' to 4''

Stainless Steel Hose Tail Male Thread Material:stainless steel Thread type:BSPT Working pressure:12 Bar

At Thomson Machinery BV, we specialize in sourcing and trading a wide range of equipment for various industries including building construction, marine construction, excavation, concrete/road work, surface & underground mining, land development, agriculture, trucking, and more.

Bringen Sie 4 von diese Rohrbügel einfach an Ihren Paletten an und die Waren rollen nicht mehr von der Palette. Verfügbar in 3 Höhen: 200m, 400mm und 600m. Stahlstärke 8mm verzinkter Stahl. Sehr gut geeignet zur (temporären) Lagerung von Rohren und Profilen. Verkauft pro Set von 4 Stück. Mindestbestellmenge:400 Zustand:Neu Produkt besteht aus:4 Stück UN Zertifiziert:Nein Artikelnummer:ACN.s820

Stainless Steel Exhaust Hose 350 Mm Bellow material:AISI 316L-DIN 1.4404-Z2CN17-12 Connection:steel weld ends Outer wall material:AISI 304-DIN 1.4301-Z6CN18-09 Safety Factor:4:1 Installation length:350 mm Temperature:-270 °C to +700 °C

Fiber metal cutting machine WATTSAN 1325 TABLECHANGE is a large and high-precision machine for cutting stainless and carbon steel, copper, aluminum, galvanized plates and other materials. On this machine, it is possible to install emitters of the following powers: 300/500/750/1000 Watts, and from 1500-5000 Watts with a protective cabin. One of the main advantages of all fiber lasers is durability: the life of the ignition unit reaches 100 000 hours. And this is about 10 years of continuous work. The manufacturer also claims that the bed of this machine can last 20 years. There are two options for the working field for this machine: 1300x2500 mm and 1500x3000 mm (1530 TABLECHANGE). For smaller workpieces, the 1300x2500 mm option is suitable; for industrial production, it is recommended to purchase a larger working area. If you have any doubts about the choice of the working field, please contact our specialists for advice.

WATTSAN 1530 ROTATORY has a rotary device for cutting cylindrical products. This machine is purchased for cutting steel tubes, galvanized and stainless steel, aluminum, brass and other materials. The machine is most often used in aviation, aerospace and mechanical engineering, as well as for the manufacture of auto parts, advertising products and household appliances. You can install a radiator of any power: 300/500/750/1000/1500/2000/3000/4000/5000 Watts. Important: the machine is equipped with a protective cabin with a power of 1000 Watts. Optional fiber laser emitter: Max / Raycus / IPG. Each of them is distinguished by high accuracy and speed of work, durability, but there are also differences. IPG is considered a premium model, it gives the best result and speed. The service life of the emitter ignition unit is about 100 000 hours. The protective glass for the lens, which must be changed at least once a month. The lens itself needs to be renewed approximately once a year.

Application liquid food for general use and alcoholic beverages extraction and delivery max 20%. Sterilize with 5% soda solution. Make / type:Alfagomma 472OO Construction:Transparent PVC - wear resistant and ozone resistant Reinforcement:Steel spiral wire Temperature range:-5 °C +60 °C (+23 °F +140 °F) Diameter:10mm to 152mm

WATTSAN 1325 BASIC fiber laser machine is an economical and practical machine for cutting thin sheet metal. The metal cutting machine works with stainless and carbon steel, copper, aluminum, titanium and other materials. This machine is often purchased for manufacture, such as aviation, astronautics and mechanical engineering. We can install Maxphotonics / Raycus / IPG fiber laser emitter for choice. The main advantage of a fiber laser over a gas laser is its high speed and accuracy of operation, as well as durability: the life of the ignition unit is 100,000 hours, i.e. years of continuous operation. The machine has a working table 1300x2500 mm. WATTSAN 1325 BASIC laser machine is a high-precision device with a reliable control system. It has a high-quality fiber laser emitter. Of course, such a device will last a long time, because the declared service life of the frame is 20 years.

Application To be mounted in compensators where it is used for suction purposes. Material:stainless steel 316 Diameter:Dn 32 to DN 300

Sensor Prullenbak 60 / 2 x 30L voor de Keuken van Roestvrij Staal Wanneer je handen of andere objecten de sensor naderen, opent het deksel automatisch. Zodra je weggaat, sluit het deksel na 5 seconden. Gooi afval weg zonder de prullenbak aan te raken! Productdetails: Materiaal: Roestvrij Staal (Body) + ABS Plastic (Deksel) Kleur: Zwart (Body), Zwart (Deksel) Inhoud van de verpakking: 1 x prullenbak 1 x handleiding (EN)

Stainless Steel Storz Coupling With Grommet Material:stainless steel Seal:Viton Working pressure:16 Bar Connection:hose tail Diameter:cam 38 to 100

Stainless Steel Guillemin Female Thread Material:stainless steel Sealing:NBR Working pressure:16 Bar Connection:Female thread Diameter:1.1/2'' to 4''

With motor Premium workmanship Electronically welded Compact and robust construction LED lighting Quick assembly Easy to clean Single block structure made of stainless steel AISI430 Greasefree labyrinth filter made of stainless steel 18/10 Interior lighting Motor and regülatör Produced according hygiene and safety requirements Meets CE standards Material corresponds to the European Food Product Standards

Stainless Steel Storz Coupling Male Thread Material:stainless steel Seal:Viton Working pressure:16 Bar Connection:Male BSPP thread Diameter:1'' total 4''

Specially developed for the gastronomy Compact and robust construction Premium workmanship Spotwelded Fat drain tap Lighting Quick assembly Easy to clean Single block structure made of stainless steel AISI430 Flame resistant filter Type B Produced according hygiene and safety requirements Meets CE standards

Silicone Bellows "red" Stainless Steel Rings Inner wall:FVMQ fluoro-silicone Reinforcement:Meta-Aramid Outer wall:Red silicone Application:Coolant, air and water, turbo purposes Temperature range:-55°C / +200°C (-67°F / +392°F)

Stainless steel AISI 304 Strong cast iron wok Ø 280 mm Special design of 1+1 pipe burners to get a higher performance Top with splashback of 400 mm Table Top thickness 5 mm Cold water faucet with integrated tap in the control panel for easy use Cooling water overflow system which will flows above the wok into the water drain PRO. CODE:WK-1+1 WOK BURNER (S):1 SOUP BURNER (S):1 B(MM):1000 D(MM):850 H(MM):1100 KW:36.7

Grip Links Material:stainless steel Rubber grade:EPDM & NBR Working pressure:70 Bar Sizes:26.9 mm to 812.8 mm Temperature range EPDM:-30 °C +125 °C Temperature range NBR:-20 °C +80 °C

Stainless Steel Guillemin Blind Cap Material:stainless steel Sealing:NBR Working pressure:16 Bar Connection:Blind cap Diameter:1.1/2'' to 4''

Made of stainless steel 20 mm thick polished steel grill plate With electric heating elements 400 Volt Regulation by thermostat with a temperature range of 50 °C to 300 °C With safety thermostat and thermocouple Insulation of the device, with heat dissipation on three sides Top with 40mm heatresistant insulation Has 1 recess in the teppanyaki top for the fat absorption and collection Equipped with safety rail at the front Substructure with sliding doors TPI1-E:510x520 TPI2-E:1150x520 TPI3-E:1450x520

Application Internal combustion engines, compressors and aggregates Type of rubber:Natural rubber Standard hardness:55° Shore A Optional hardnesses:45˚, 55˚, 65˚, 75˚ (±5˚) Shore A Standard:Metal parts (ST-37) galvanized Optional:stainless steel

Made of stainless steel 20 mm thick polished steel grill plate With bar burner Regulation by gas valves, with pilot light and safety thermocouple Insulation of the device, with heat dissipation on three sides Top with 40mm heatresistant insulation equipped with safety rail at the front Has channels for the removal of fats Substructure with sliding doors IG-1:510x520 IG-2:1150x520 IG-3:1450x520

Stainless Steel Clamping Shell Coupling Female Material:stainless steel Seal:PTFE Thread Type:BSPP Female Thread Working pressure:25 Bar Diameter:1/2'' to 4''