Izdelki za jeklena jekla (62)

Steel platform for truck scales - EURO LINE Track width - 1,25 meter Axle load - 15 tons Up to 160 weighings per day

The profile Angle Bar is used to connect other profiles during installation, both support tables and self - supporting structures for arranging a ventilated facade. Most often, the corner is used in the manufacture of arched structures, as well as in other structures where there is some bend. Also, the corner can be used in furniture production, providing even corners. The profile ANGLE BAR are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m. sq. The profile ANGLE BAR with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation.

The Сsolar profile is used to create various mounting systems for solar power plants on roofs, when installing ventilation, heating systems and laying electrical cable networks. The Сsolar profile is easy and quick to install , while securely fixing the structure. The Сsolar profile (mounting traverse) is ideal for quick and effective fastening of ventilation ducts, electric trays, water pipes, solar panels. Also, the crosshead can be used in the assembly of crossheads, consoles, supporting structures of any type. The Сsolar profile is made with a thickness of 1.5 mm. The length of the profile is limited only by the transport dimensions. The galvanized Сsolar profile with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation.

Manufacture a variety of pieces from the stainless steel, aluminium, titanium steel and heat-resistant steel.

The profile U is used in the manufacture of columns, beams, trusses for the load - bearing frames of buildings. It can be used as roofing and wall purlins, lathing, assembly traverse. U profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 2.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g per sq. m. The galvanized profile U with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

C profiles are produced by cold forming on roller mills from galvanized coiled steel with a thickness of 0.5 to 3.0 mm, have a wall height of up to 300 mm and, at the request of the customer, can be provided with holes for bolted connections. The length and thickness of the profiles is determined during the design and can be up to 12 m. The thickness of the zinc coating is from 100 to 600 g / m2. The galvanized profile С with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

Our company has all standarts of Steel with our product you can see on our website.

Steel fibers are used to strengthen the foundation and concrete structures in construction.

The profile Z forced is widely used as wall and roof beams in the construction of light steel frame buildings (LSFB), as well as an element for fastening the supporting frame in systems of hinged ventilated facades. The length of the profiles is determined by the design and can be up tp 12 m. with a thickness from 0,5 to 3,0 mm with galvanized coating up to 600g/m2. The galvanized profile Z forced profile with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

Welding is carried out by high-class masters. At their disposal are reliable devices with excellent characteristics. Our employees strictly adhere to the developed technology, so they are able to make aesthetically attractive and durable connections.

The profile Z is widely used as wall and roof beams in the construction of light steel frame buildings (LSFB), as well as an element for fastening the supporting frame in systems of hinged ventilated facades. The length of the profiles is determined by the design and can be up tp 12 m. with a thickness from 0,5 to 3,0 mm with galvanized coating up to 600g/m2. Galvanized profile Z with acceptable price is suitable for influence of high and low temperature, humid environment, solar radiation. Such profile is used for the construction of warehouses, production workshops, trade pavilions and centers.

Contact WhatsApp +380949454661, email: office@freedom-global-trade.pw

We produce horizontal stainless steel tanks

Our team of experienced designers is able to design a building or object of any complexity. Modern software reduces the time frame and improves the quality of design work, which ultimately results in a reduction in financial costs. On large objects, cooperation with leading design institutes is possible. In the course of free consultations of specialists, you will be able to determine the optimal structural scheme of the future object, draw up an approximate schedule of work and even see the object on computer visualization. After choosing a constructive solution, a technical assignment is signed, which allows you to proceed to the next stages of the object's implementation.

Steel platform for truck scales - POWER LINE Track width - 1 meter Axle load - 20 tons Up to 250 weighings per day

Argon welding is a popular name among people for welding technology, in which welding is performed in a shielding gas environment, most often argon. The gas prevents the metal under welding from coming into contact with the oxygen in the air, preventing oxidation. Inert argon is well suited for this purpose as it is non-toxic and relatively inexpensive. The equipment for argon welding comes in two types, TIG and MIG. In both cases, the machines are equipped with a non-consumable tungsten electrode. The difference is that TIG uses separate hard facing rods, but in MIG, the wire is fed automatically from the spool, for which people often call this method semi-automatic.

The process is performed in closed chambers, where a jet of millions of glass microbeads, moving in a stream of compressed air, is directed on the product surface using a specialized gun. The abrasive removes all contaminants from the surface without changing the part geometry or damaging the product. It allows even fragile materials to be handled gently with this method. Controlled plastic deformation of the metal surface forms a light work-hardening that improves the service performance of the product. Due to the matting effect, this method is often used for finishing aluminum parts.

Two methods are used to bend pipes at a certain angle, hot and cold. We provide cold-bending pipe services. Products made of plastic metals and alloys lend themselves well to this technology. Bending pipes by this method is possible only if their diameter does not exceed 100 mm. This type of machining is done manually or through special bending machines. When bending round pipes, it is essential to avoid dents that decrease their inner diameter. The pipes should have smooth bends along a certain radius and a circular shape in the bend areas. Our pipe bending machines allow you to get a quality bend in a few rolls.

We offer a ground mounting system of our own production for PV - modules. PV - modules size: 1650 x 992 mm The height of the structure, the angle of inclination, the depth of immersion of the piles are calculated depending on the area of construction, geological research and the terrain. The price includes design, production of a profile with mounting holes, fasteners for assembling the structure.

The eXplode sports set consists of various units and elements providing all the essential assets for an effective and comprehensive training. This workout complex helps an athlete to develop strength, stamina, physical alertness and flexibility. Up to 15 users can perform exercises in the same time. There are different varations of station. The complete version includes: monkey bar; bar for dynamic chin-ups; fast-moving chin-up bar; cross over; medball rack; well bar; barbell holder; plates holder; push-up support; squat rack; kettlebell rack; resistance tubes holder. Plenty of additional equipment may be attached to the eXplode station: suspension trainers, dumbbells, punching bag, rope, push-up and squat racks, pull-up bar, monkey bar, plyo boxes, step up platforms, expanders etc. Therefore, station can be adjusted according to your needs and demands.

By the principle of operation, the coordinate punch press resembles an office paper puncher. The workpiece is pressed against the matrix. After that, a punching tool, the punch, strikes the workpiece with a force of up to 200 tons. In a fraction of a second, the punch and pressure ring return to their original position and the position-sensing mechanism moves the workpiece for the next strike. The capabilities of the equipment are not limited to the production of through-holes. Using punches of different sizes and shapes allows us to perform the most diverse tasks, such as countersinking, dimpling and forming. Modern coordinate punching machines are characterized by high productivity with moderate energy consumption.

The VTA/N "Tank in Tank" heat accumulator features a stainless steel tank inside a carbon steel tank. This design combines the benefits of both a storage tank and a heat accumulator, allowing for simultaneous use in heating systems and hot water storage. The inner tank is made from high-quality food-grade stainless steel with a wave-shaped wall for increased resistance to pressure, improved heat exchange area, and self-cleaning through thermal expansion. The VTA/N-1 model includes a carbon steel heat exchanger at the bottom for optional connection to solar collectors or other heat sources (heat pump, gas, solid fuel, electric boilers). The VTA/N-2 model lacks a heat exchanger, allowing direct connection to any heat generator. The VTA/N-1-SOLAR PLUS model has an enlarged inner tank partially placed within the heat exchanger, improving efficiency with low-temperature heat sources.

KSL provides quality metal powder coating services Powder coating is one of the most popular methods of painting metal products, which uses a special powder consisting of polymer materials and dyes, which is applied to the surface of the object by an electrostatic method or artificial wind. This method allows you to achieve a high quality coating and ensures a long service life of the part. You can familiarize yourself with us in more detail: Website: ksl-pro.com or ksl.ua Mail: zakaz@ksl.ua Phone: +38 (050) 011 83 29 #powdercoatingservices #powderpaint #lpowdercoatpaint #blackpowdercoat #powdercoating

KSL provides quality services in Laser cutting of metal Laser cutting of metal occurs by burning the metal structure with a focused laser beam. Laser cutting of metal is characterized by such properties as: high speed of work, accuracy of details, quality of cutting and almost fully automated process. We use high-precision German TRUMPF equipment for metal cutting The main characteristics of KSL metal laser cutting: Laser source: 4000W Maximum sheet size: 6000*2000 mm Maximum sheet thickness (carbon steel): 20 mm Maximum sheet thickness (stainless steel): 15 mm Maximum thickness of non-ferrous metals: 10 mm You can familiarize yourself with us in more detail: Website: ksl-pro.com or ksl.ua Mail: zakaz@ksl.ua Phone: +38 (050) 011 83 29 #metallasercutting #lasermetalcutting #lasertubecutting #lasercutsteel #lasercuttingservices

The manufacturer of Spare parts for Metallurgical and Mining industries. Steel and iron casting parts, forging, CNC machining, welded steel parts. Some examples of our products: •Slag pots •Grate bars for Coke Plant, for Sintering machines •Blast furnace cooling plates, BF staves •Blast furnace charging device, large bell d5400, large-bell hopper d5400 •Moulds, metallurgical plates •Hot sinter screens •Converter vessels, helmet housing •Air and oxygen blast lances, tuyeres for blast furnaces •BOF oxygen lance tips •Bronze screw nuts, max diameter 0,88 m •Smoke exhausters rotors, rotors for gas blowers, hot blast fans •Machined products: wheel gears, ring gears, pinion shafts, crane wheels •Rollers for CCM •Сrusher wear parts •Cone-type crusher amours, max diameter 2,5 m •Gear rings, max diameter 8,2 m •Primary crusher wear plates, mill wear plates, bottom plates •Crusher hammers •Mill drums and shells, diameter 3,6 m х length 5,0 m

Hydroabrasive cutting of sheet materials. Does not cause changes in the processed material due to the absence of thermal influence. Maximum thickness of the workpiece: 150 mm. Processing area - 2000×3000 mm. Accuracy up to 0.1 mm (for a thickness of 40 mm).

Manufacturing of parts according to drawings of any level of complexity. All types of metalworking, CNC machining centers. High machining accuracy.

Turning with CNCmachines automatic type can make big quanity with a small period of time. We are workinf with stainless steel, steel, aluminium, brass. Threading, drilling, turning and milling made in the same time on one machine

KSL provides quality services in laser cutting of pipes Laser cutting of metal pipes occurs by burning the metal structure with a focused laser beam. With the help of laser cutting of metal pipes, it is possible to manufacture complex parts, the edge of which does not require further processing. We use high-precision German TRUMPF equipment for metal cutting The main characteristics of KSL metal laser cutting: Laser source: 2700W Maximum empty pipe size: 6500 mm The diameter of the round pipe: up to 150 mm Dimensions of the profile pipe: up to 150 mm The maximum thickness of the pipe wall (carbon steel): 6 mm The maximum thickness of the pipe wall (stainless steel): 4 mm The maximum thickness of the pipe wall (non-ferrous metals): 4 mm You can familiarize yourself with us in more detail: Website: ksl-pro.com or ksl.ua Mail: zakaz@ksl.ua Phone: +38 (050) 011 83 29 #pipecutting #lasermetalcutting #lasertubecutting #lasercuttingofmetalpipes #pipelasercutting

Our equipment and experienced professionals can produce high quality goods for low price! Our market - all areas of business, where CNC machining needed: - Machine building - Agriculture - Plastic forming - Food industry