Izdelki za jeklena jekla (26445)

Stainless Steel Hexagonal Bit

M33 x 120mm Partially Threaded Hex Head Bolt Stainless Steel A2 - DIN 931. A wide range of Stainless Steel fasteners including Hexagon Head High Tensile Bolts Stainless Steel DIN 931 at cost-effective price available from A2Z Fasteners.

Weight: 0,38 kg Height: 27,5 cm Width: 44 cm Material: 0,7 mm 19849:Ornament Sheet

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

Eye Connectors Y003 Material Information:Steel ,DIN 1.0718 Surface treatment:Zinc plated Compatible with:S15, S18 Components:Y003 Unit Weight:0,009 KG

Système de ressort à gaz Système d'arrêt absorbant les chocs arrière Coupe à des angles standard et à tous les angles intermédiaires Poignée ergonomique facile à saisir Système de connexion fourche + plateau tournant conçu sur mesure, qui assure une précision d'équerre définie Interrupteur de protection thermique Pinces faciles à utiliser. Peut être incliné dans n'importe quelle direction, serré en un seul mouvement Puissance moteur: 2,2 kW, 3HP, 230V-400V Tailles de scie: D = 400 mm, d = 30-32 mm Vitesse de scie: 3000 tr / min Tailles: 68x90x163 cm Poids total: 115 kg Pression atmosphérique: 6-8 bar, 5lt / min 2 pièces Pinces pneumatiques Pistolet à air Lame de scie Moteur monophasé Convoyeur Système de ressort mécanique Pinces pneumatiques verticales Système de lubrification par pulvérisation

Range of application fiber optic transmission systems in public telecommunication networks, service networks and dedicated networks if connected to the public communication network, installation between buildings of different types, installation in communication lines, on power lines and automatic control lines of electric railways at points with a maximum electric field potential of up to 12 kV, inside protective PE pipes (including air blowing installation), in swamps, in cable trays, in ducts, tunnels, sewers, on bridges and overpasses. Number of optical fibers in a cable:up to 192 Number of core elements:4, 5, 6, 8, 9, 12 Cable max tensile load rating:3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0 kN Tensile strength:from 4.7 kN Max installation (short-term, dynamic) tension:from 1.2 kN Cable diameter:from 9.9 mm Bend radius:15 cable diameters Cable weight:from 81 kg/km Crush resistance:0.3 kN/cm Impact resistance:5 J

Termistor 100K NTC + cable 1m + conector

Towel Radiator

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit. Note (TMA, TMN): The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ±90° during the interruption of the supply voltage. Inkremental or absolute:Absolute Interface:Analogue Single- or Multiturn:Multiturn Design:50mm Special feature:Digital multiturn memory Housing material:Aluminium, Stainless steel Flange and shaft:Synchroniser flange Measuring range:3600 in angle degrees Signal path:CCW, CW Electrical connection:Cable 1m, Device connector M12 x 1 Output signal analogue:0 - 10VDC, 0 - 20mA,4 - 20mA, ± 10VDC

La TubTShape H es una máquina diseñada para el conformado “T” de tubos con espesores desde 0.4 mm hasta 1 mm en acero inoxidable y galvanizado. Esta máquina es ideal para el sector de conducción de humos, ya que junto con la soldadura logran tubos sin fugas. Cuenta con una pantalla táctil para el control de las secuencias e incluye los útiles necesarios para diámetros entre 80 y 300 mm, de cambio rápido y sencillo.

Customized tool

Columpio individual de un asiento. Postes y dintel fabricados en acero. Edad de uso 312 años. Certificado normativa EN1176 Ref:JIGST1421

Professionelle Inspektion, Wartung & Instandhaltung Ihrer Stanzwerkzeuge

* Size : 25cm*24cm*10cm * Material: Stainless Steel 304 * Capacity:4L * Thickness : 5mm Size:25cm*24cm*10cm Material:Stainless Steel 304 Capacity:4L Thickness:5mm

Abriebfester elektrisch leitfähiger Sprialschlauch Typ 519 Hochabriebfester Gummispiralsaugschlauch- und Druckschlauch. In elektrisch leitfähiger Gummiqualität. Auch einsetzbar als Saug- und Druckbaggerschlauch.

Unsere Stärke im Schweißen liegt speziell in der langjährigen Erfahrung die wir aufzuweisen haben sowie dem Schweißen verschiedenster metallischer Werkstoffe. Dabei haben wir uns auf kleine Losgrößen spezialisiert.

Screwed BSPP, Reduced Bore, 3 Way, Stainless Steel Body & Ball, RPTFE Seats, Rated PN63, Fitted with Pneumatic Actuator, Size for 5.5 Bar (80psi) Air Supply. Fully Assembled and Tested.

New design adopted for punching stainless steel. Inching function as standard. 25mm and 26mm dia. holes are possible with optional parts. Max. Punching Thickness:16 mm Hole Making Time (Punching):11.8 sec. Hole Making Time (Returning):5.7 sec. Allowable Max. Pressure:68.65 Mpa Max. Punching Diameter:24 mm Ram Stroke:25 mm Max. Throat Depth:110 mm Max. Output:464 kN Weight:30 kg

Acrylpolitur Paste Unipol - Reparatur + Pflege Marinetech Artikelnummer:814853125 EAN Code:4022697741246 Gewicht per 100 St:16,60 kg Verpackungseinheit:1 St Inhalt:125g

Serre Agricole - Agricole et élevage

Resin with a high concentration of compacted mineral filler, coated with a double layer of Gel Coat Color Cream Includes valve and grill. Main features Class 3 nonslip surface (certified according to ENV12633) Prevents the proliferation of bacteria Rectangular stainless steel grill Possibility of applying total or partial protection Possibility of being cropped repairable surface High quality material 45 kg/ m² Note Custom cuts add delivery time in 2 weeks

- flexibel - termingerecht - qualitativ hochwertig - ökonomisch Gewicht: 1000 kg Abmessungen: 2.000 x 2.000 x 4.000 mm

HOTEL MODEL REF:02080016 Coverage area:2,5m Pole:Stainless steel 27-30mm Metal sticks nº:10 Metal sticks Proflie:Steel lacquered 4,5mm Frame:Stainless steel Fabric:Olefin Base:04030055

Induktive Näherungsschalter sind berührungslos arbeitende Sensoren. Sie erfassen sämtliche leitfähige Metalle, unabhängig davon, ob sie sich bewegen oder nicht. Der erreichbare Schaltabstand der Geräte ist dabei vom Objektmaterial und dessen Abmessungen abhängig. Die vibrationsunempfindlichen Sensoren können seitlich oder frontal angefahren werden. Induktive Näherungsschalter werden zur Anwesenheitsabfrage (z.B. Warengutträger), Positionierung (z.B. Ofenklappen), Zählung (z.B. Muttern / Schrauben), Drehzahlabfrage (z.B. an Zahnrädern), an Fördersystemen (z.B. Schlauchzuführungen) oder Abstandsmessungen (z.B. Einpresskontrolle) von metallischen Objekten eingesetzt. Spannungsart:DC Bauform:Zylinder, Gewinde Werkstoff des Gehäuses:Edelstahl 1.4305 Gewindemaß metrisch:12 Ausführung des elektr. Anschlusses:Steckverbinder M12 Ausführung des Schaltausgangs:PNP Ausführung der Schaltfunktion:Schließer Mechanische Einbaubedingung:bündig Werkstoff der aktiven Fläche:Edelstahl 1.4305 Schutzart (IP):IP67 Korrekturfaktor (St37):1 Korrekturfaktor (V2A: 1mm):0.4 Korrekturfaktor (V2A: 2mm):0.8 Korrekturfaktor (Alu):1 Korrekturfaktor (Ms):1.3 Korrekturfaktor (Cu):0.85 Kabelzuführung:axial Ausrichtung der Kabeleinführung:axial Schaltfrequenz:600Hz Max. Leitungslänge:300m

Our quality Micron Self Piercing Grommets are made from heavier gauge brass then traditional sheet metal grommets, allows a one shot installation action without having to pre punch holes to many qualified material such as outdoor signage and vinyl banners. These grommets are the number 1 choice of the banner industry to decrease the production time by half due to its one shot application process. Available in sizes #1.7 (1/8” ID) to #5 (5/8” ID). Weight:4.50 lbs Sku:N/A Categories:Metal Grommets, Self-Piercing Grommets & Washers

Hartmetall-Lackierdüsen werden überwiegend für das Lackieren von Kupferdrähten verwendet. Simon bietet Lackdüsen in einem hohen Präzisionsbereich an. Im Hartmetall Sektor ab 0,10 mm....

Bilanciatori inossidabili Ideale per l'industria della lavorazione della carne e ambienti di lavoro umidi Utilizzando grasso per uso alimentare (conforme a NSF) e materiali inossidabili, l'uso di prodotti di qualità Kromer ora soddisfa anche le rigide linee guida dell'industria alimentare. Il comprovato principio di base dei prodotti Kromer rimane ovviamente nella versione inossidabile: le applicazioni pesanti, come le seghe per il processo di taglio della carne, sono mantenute dal bilanciatore inossidabile nella posizione desiderata per l'utente e possono quindi funzionare senza problemi . L'ergonomia e il flusso di lavoro nella produzione possono essere notevolmente migliorati incorporando i prodotti Kromer nel processo di produzione. Naturalmente, la versione inossidabile offre anche l'elevata dotazione di sicurezza dei nostri prodotti Kromer. Portata::15-55 kg Corsa::2 m Made in::Germany Materiali::Inossidabile Opzione::Tipo 7236 con arresto

Durch das Honen können wir die Oberflächenbeschaffenheit und Maßhaltigkeit vorwiegend runder, rotationssymetrischer Bauteile optimieren und perfektionieren.

Barre ronde inox Exécution:Laminé à chaud Dimensions:Ø 25 à 50mm