Izdelki za jeklena jekla (26406)

Centre Cover protects from Swarf Entering Inside the Chuck Replacement dust cover to suit a B series power chuck. The cover plate is used to protect the internal parts of the chuck from swarf ingress. Estimated delivery:Next Day (subject to availability)

M3 x 5mm Countersunk Pozi Machine Screws Stainless Steel A2 - DIN 965. A wide range of Stainless Steel fasteners including Countersunk Pozi Machine Screws Stainless Steel DIN 965 at cost-effective price available from A2Z Fasteners.

Manuele omsnoeringsapparaten met staalbandband A333 : Manuele omsnoeringsapparaten voor het omsnoeren van vlakke pakken type A 333 Sluiting ZONDER sluithaken

Products from a bent profile are made from hot rolled (hc) and cold rolled (hc) sheets (rolls) with a thickness of 1.5 to 5 mm on special industrial bending machines and guillotines with consistent dimensional data, in accordance with GOST (TU). The range of metal products obtained from a flat billet bent channel GOST 8278; bent corner GOST 19771. The bent channel is designed to significantly lighten and reduce the cost of the final cost of metal structures and other demanded products. Despite the fact that it is less durable in comparison with the hot rolled analogue , its use is in demand in mechanical engineering, furniture factories and manufacturing companies. The length of the billet of the channel is 6 meters, the width of the flange is from 30 to 200 mm, it is possible to manufacture a bent channel by special order . You can contact us by mail - marketing@stalevar.com or by phone +380675624220. Channel bent, steel 3 PS:30x30x2.0, 40x20x2.0, 40x20x2.5, 50x30x2.0, 50x30x3.0, 50x32x2.0, 50x32x3.0, 50x38x2.5 Channel bent, steel 3 PS:50x40x3.0, 56x32x3.0, 60x30x2.0, 60x30x3.0, 60x32x2.0, 60x40x2.0, 60x40x3.0, 60x50x3.0, 80x30x3.0 Channel bent, steel 3 PS:80x30x4.0, 80x32x2.0, 80x40x2.0, 80x40x3.0, 80x40x4.0, 80x50x4.0, 80x60x4.0, 100x40x3.0, 100x40x4.0 Channel bent, steel 3 PS:100x45x3.0, 100x50x3.0, 100x50x4.0, 110x50x4.0, 120x50x3.0, 120x50x4.0, 120x60x3.0, 140x60x3.0 Channel bent, steel 3 PS:140x60x4.0, 140x60x5.0, 160x60x3.0, 160x60x4.0, 160x80x5.0, 180x50x3.0, 180x60x3.0, 180x60x4.0 Channel bent, steel 3 PS:180x80x4.0, 180x80x5.0, 200x80x4.0, 200x80x5.0, 200x100x5.0 Bent corner:20x1.5, 20x2.0, 22x1.5, 22x2.0, 25x1.5, 25x2.0, 30x1.5, 35x1.5, 35x2.0, 35x25x2.0, 40x1.5, 40x2.0 Bent corner:40х25х1,5, 40х25х2,0, 45х2,0, 45х3,0, 45х28х3,0, 50х28х3,0, 50х30х3,0, 60х4,0, 75х50х3,0 Channel, bent steel 09G2S:30x30x2.0, 40x20x2.0, 40x20x2.5, 50x30x2.0, 50x30x3.0, 50x32x2.0, 50x32x3.0, 50x38x2.5, 50x40x3.0 Channel, bent steel 09G2S:56x32x3.0, 60x30x2.0, 60x30x3.0, 60x32x2.0, 60x40x2.0, 60x40x3.0, 60x50x3.0, 80x30x3.0, 80x30x4.0 Channel, bent steel 09G2S:80x32x2.0, 80x40x2.0, 80x40x3.0, 80x40x4.0, 80x50x4.0, 80x60x4.0, 100x40x3.0, 100x40x4.0, 100x45x3.0 Channel, bent steel 09G2S:100x50x3.0, 100x50x4.0, 110x50x4.0, 120x50x3.0, 120x50x4.0, 120x60x3.0, 140x60x3.0, 140x60x4.0 Channel, bent steel 09G2S:180x80x5.0, 200x80x4.0, 200x80x5.0, 200x100x5.0 Angle bent, steel 09G2S:20х1,5, 20х2,0, 22х1,5, 22х2,0, 25х1,5, 25х2,0, 30х1,5, 35х1,5, 35х2,0, 35х25х2,0, 40х1,5, 40х2,0 Angle bent, steel 09G2S:40х25х1,5, 40х25х2,0, 45х2,0, 45х3,0, 45х28х3,0, 50х28х3,0, 50х30х3,0, 60х4,0, 75х50х3,0 Channel bent, steel 3 PS:30x30x2.0, 40x20x2.0, 40x20x2.5, 50x30x2.0, 50x30x3.0, 50x32x2.0, 50x32x3.0, 50x38x2.5 Channel bent, steel 3 PS:50x40x3.0, 56x32x3.0, 60x30x2.0, 60x30x3.0, 60x32x2.0, 60x40x2.0, 60x40x3.0, 60x50x3.0, 80x30x3.0 Channel bent, steel 3 PS:80x30x4.0, 80x32x2.0, 80x40x2.0, 80x40x3.0, 80x40x4.0, 80x50x4.0, 80x60x4.0, 100x40x3.0, 100x40x4.0 Channel bent, steel 3 PS:100x45x3.0, 100x50x3.0, 100x50x4.0, 110x50x4.0, 120x50x3.0, 120x50x4.0, 120x60x3.0, 140x60x3.0 Angle bent, steel 3 PS:20х1,5, 20х2,0, 22х1,5 22х2,0, 25х1,5, 25х2,0, 30х1,5, 35х1,5, 35х2,0, 35х25х2,0, 40х1,5, 40х2,0

Machine part GROUP 4 - 5

Tôle perforée R5T8 en acier

Barre ronde inox Exécution:Laminé à chaud ; Forgée Dimensions:Ø 20 à 500 mm

Shut off valves suitable for water, petrol and oil application. Very compact construction made of steel or aluminum

Solid, turned, grinded and hardened steel plain bearing | Requires maintenance FER-MAS® is a steel plain bearing without integrated sliding material. Good lubrication is required! Suitable for highest loads, insensitive, long service life. For technical details, please visit the product page on our website! Support material/Carrier material:100Cr6 hardened and grinded alternatively 20MnV6 Static load:≤ 250 N/mm² Dynamic load:≤ 150 N/mm² Sliding speed:≤ 0,6 m/s Friction value:0,05 up to 0,25 µ Temperature strain:-100 up to +250 °C Max. PV-value:1,2 N/mm² x m/s Hardness:58 up to 62 HRC Housing Ø:H7 Shaft tolerance:f7 to h6

Finitura acciaio e alluminio, trattamento acciaio e superfici La finitura acciaio è una finitura metallica a riporto di acciaio inox ad arco elettrico, applicabile su metalli, legni duri, MDF, cemento, gres e cotto.

Wir bieten Ihnen unseren Service im Bereich Sägen und Brennschneiden an. Sägen Wir können alle Rundabmessungen in gesägten Abschnitten in 2 Lagerstandorten auf diversen modernen CNC-gesteuerten Bandsägen mit engsten Toleranzen herstellen. Der Durchmesserbereich erstreckt sich von Rund 20 bis Rd 720 mm. Brennschneiden Auf CNC-gesteuerten autogen- und Feinstrahl-Plasma-Anlagen erstellen wir die kompliziertesten Brennteile nach Kundenanforderung. Schweissfasroboter sowie Bandschleif- und Entgratungsmaschinen ermöglichen uns jegliche Kantenberatung sowie Rund- und Konturfasen.

Zu den Standardlaborgeräten zählen wir eine breite Auswahl an Tiegeln, Schalen und dazu passenden Deckeln, die durch Ihre neutrale Form für einen Großteil der grundlegenden Laborarbeiten geeignet sind. Durch zusätzliche Möglichkeiten der Konfiguration, wie verstärkte Böden, Wände oder drahtverstärkte Randbereiche, sind unsere Standardgeräte auch anspruchsvollsten Aufgaben gewachsen.

Here is the range of the stainless steel winches which we have in our programme. Gebuwin has two ranges of spur gear winches which are used for hoisting loads. All of the spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The hoisting capacities are calculated according to the first cable layer on the cable drum. Due to the minimal friction loss in the transmission, the spur gear winches have a high performance efficiency. 

The coding is as follows: The first two letters refer to the type and the subsequent numbers refer to the hoisting capacity in kg’s. A few letters then follow; these refer to the surface treatment and the type of winch. The explanation for the coding is as follows: Type coding: HW = economy hand driven winches (hoisting) TL = spur gear winches (hoisting) TC = spur gear winches (pulling) Version coding: FS = provided with cable drum free spool device SS = stainless steel...

Farbige, staubfreie Oberfläche, leicht zu reinigen, abriebfest für Geh- und leichten Rollverkehr Mind. zweimaliger Anstrich; Poren werden ausgefüllt. Es entsteht ein durchgehender, farbiger Film auf der Bodenoberfläche. Stärke ca. 0,2 - 0,4 mm

Our compane had selling sheet metal starts from 1994. We have our own warehouse, which consist more than 2000 tons of different steel sheets. Our prices are very good, because of we are trading metall directly from producers. We have a wide variety of steel grades for various applications.

Load capacity: 125 kN test load EN 124. Material: Frame and cover made of 2 mm cold-formed precision steel profiles, hot-dip galvanised. Or in grade 304 stainless steel, passivated. Stainless steel hinges. High-specification gas strut(s). Features: Comfort-lift access cover. Smell proof, largely water-tight (not guaranteed to be completely water-tight). EPDM seal. Opening tools included. Opening is assisted by the gas strut(s) to such an extent that the BV-GD/BVE-GD cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: As a cover over installations that need to be opened frequently, without particular effort. Particularly for inspection chambers. BVE-GD is particularly recommended over plant in swimming pool areas For indoor swimming pools only use grade 316 material! Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our specifications. Care...

M3.2 x 6mm Dome Head Blind Rivets Steel Head Steel Mandrel Pop Rivets DIN 7337. A wide range of Bright Zinc Plated fasteners including Dome Head Blind Rivet Steel Bright Zinc Plated DIN 7337 at cost-effective price available from A2Z Fasteners.

Entrust your sheet metal stamping to Marxam Project and experience excellence in metalworking. We offer the highest quality of service, precision and efficiency. Our advanced technology and skilled technologists with many years of experience ensure that each piece is carefully stamped to the customer's specifications. Whether you need small, unique parts or large-scale production, Marxam Project has all the necessary tools and knowledge to deliver customized products that will exceed your expectations. When you choose Marxam Project for sheet metal stamping, you are choosing a partner with many years of experience and a commitment to customer satisfaction. What sets us apart is our rigorous quality standards. Contact us today to learn more about our sheet metal stamping services and how we can help you achieve your production goals with precision and efficiency.

Natürlich! Hier ist eine Produktbeschreibung für den Continental SC20 Plus S Reifen auf Deutsch: Continental SC20 Plus S Reifen – Produktspezifikationen Modell: Continental SC20 Plus S Typ: Sommerreifen für Nutzfahrzeuge und Lkw Verfügbare Größen: Verschiedene Größen von 17 bis 22 Zoll Durchmesser Höhe/Breite: Variiert je nach Größe, typischerweise zwischen 65 und 80 für das Verhältnis sowie 195mm bis 315mm für die Breite Reifenaufbau: Radial Tragfähigkeitsindex: Variiert je nach Größe, typischerweise von 106 bis 150 Geschwindigkeitsindex: J (bis 100 km/h), L (bis 120 km/h), oder M (bis 130 km/h), je nach spezifischer Größe Profil: Symmetrisches Design für gleichmäßige Abnutzung und hohe Stabilität Eigenschaften: Langlebigkeit: Verbesserte Lebensdauer und Abriebfestigkeit für anspruchsvolle Nutzfahrzeuganwendungen

- Dichtung FPM - Werkstoff Edelstahl 1.4301 / 1.4307 - Temperaturbereich -20 bis +120 ˚C - Arbeitsdruckbereich -0,95 bis 24 bar Form:gerade Anwendung:pneumatischer Material:Edelstahl 1.4301/1.4307 Dichtung:FPM Funktion:Steckanschluss

Zum Schweissen von Stahlrohren! Die weit ausgesparten Brücken ermöglichen bis zu 80% der Wurzellage einzubringen, ohne die Zentrierung zu lösen. Die Druckschrauben ermöglichen, deformierte Rohre so auszurichten, dass ein bündiges Heften möglich ist. Eindimensional, von DN100 bis DN1200 verfügbar!

Halbzeuge und nach Kundenvorgabe gefertigte Teile aus Kohle, extrudierten und isostatisch gepressten Grafit

HPM® 80/20 AL is a resistance alloy with a unique composition that provides deep draw capability. It is used as a heating element in electronic applications. HPM® 80/20 AL has good forming characteristic and canbe deep drawn. It is not suitable for extended exposure to air at the elevated temperatures. Available Sizes: HPM® 80/20 AL is available from Hamilton Precision Metals as strip product in thicknesses from 0.0005” to 0.050” (0.0127 mm to 1.27 mm) and width up to 12.0” (304.8 mm). Foil Product may be supplied to a thickness of 0.0001” (0.00254 mm) in width up to 4.0” (101.6 mm). Density:0.304 lbs./cu.in. Melting Point (Approx.):1400°C Electrical Resistivity @ R.T.:108 Microhm·cm Temperature Coefficient of Resistivity (TCR) (25°C to 105°C):100 ppm/°C Thermal Expansion Coefficient (20° to 100°C):13.4 x 10-6/°C Thermal Conductivity @ 100°C:13.4 W/m·K Magnetic Attraction:None

M6 x 14mm Set Screws Hex Bolts Stainless Steel A2 - DIN 933. A wide range of Stainless Steel fasteners including Hexagon Head Set Screws Stainless Steel DIN 933 at cost-effective price available from A2Z Fasteners.

Stalen Tafelonderstel X-poten Set 2 stuks. Staal gelaste constructie. Al onze stalen tafelpoten krijgen standaard een hoogwaardige poedercoating. Dikte poot: 60 mm x 60 mm. 4 stuks zware metalen platen. Het onderstel is voorzien van verstelbare pootglijders voor een perfecte afstelling op de vloer. Eenvoudig te monteren en te vervoeren.

Rubber Basket

Eco-friendly ester-based cleaner designed to remove bitumen, tar, grease, oil stains. An agent based on vegetable hydrocarbons with additives that make it easier to wash stains from the cleaned surface. CLEAN-BIT ECO is used to remove dirt from metal, steel, chrome, aluminum and painted surfaces. The agent is ideal for cleaning tools and equipment designed to work with heavy hydrocarbon fractions such as asphalt, tar. Does not cause corrosion of cleaned metal surfaces CLEAN-BIT ECO deeply penetrates the surface to be cleaned, reacts with the oil stains dissolving them and at the same time breaking down their structure. •high efficiency of action, •easy to use, •removes even old dried stains, •wide range of action on the type of stains. APPLICATION Apply the product to the stains with a microfiber cloth.Gently wipedirty surface.For heavier dirt, apply the product directly to the surface to be cleaned and wait 5 minutes. Wipe off the stains with a microfiber cloth. Packaging:5L metal containers and 1000 L mauser

Rasthebel in Edelstahl-Version und mit AUF/ZU-Rasterung.

Material: low carbon steel We produce our corrugated STAX segment wire steel fibers in the lengths of 50 mm and 34 mm. Application for our STAX segment wire steel fibers you find in industrial concrete floors and plates.

Product specifics: Stainless steel breaking bit, Copper corkscrew jointed mouth, Stainless steel turn cheeks, Mouth size:5", Mouth thickness:13MM, Cheek length:6" Material:Stainless steel Mouth size:5" Mouth thickness:13MM Cheek length:6"