Izdelki za jeklena jekla (26213)

M4 x 90mm Allen Cap Head Bolts Socket Screws Stainless Steel A2 - DIN 912. A wide range of Stainless Steel fasteners including Allen Cap Head Screws Stainless Steel DIN 912 at cost-effective price available from A2Z Fasteners.

TECHNICAL SPECIFICATIONS - Reference : 007236 - Pierre Guerin brand - Flat bottom tank on feet - Capacity : 190 HL - Material : 304 L - Interior finish : cold-rolled finish - Exterior finish : brushed Roof - Central chimney - Ø 500 stainless steel hatch with clamps - Interior coil inlet and outlet - Tapping for temperature sensor - 1 x 50-macon connection to chimney, internally externally threaded - Walkway support Bottom - Fully drained, Ø 50 stainless steel ball valve - Feet with adjustment screws and plates - Cooling circuit on bottom of tank Shell - 410 x 530 stainless steel door with external opening - Stainless steel ball valve Ø 50 for clear draught - Stainless steel taster - 2 stainless steel coils inside - 6 turns of shell circuit - 1 level with return in the chimney DIMENSIONS - Diameter: 2785 mm - Overall height: approx. 4500 mm

These accessories use for precision machinery parts.

Dowels

Stainless steel snap rings The retaining rings are made of a stainless steel alloy with unique properties The stainless steel strip is rolled to produce a mirror finish The strip is firstly machined to remove the sharp corners. This makes handling safer during sewing into the filter bags and protects the filter bag fabric from damage during operation.

M24 x 240mm Partially Threaded Hex Head Bolt Stainless Steel A2 - DIN 931. A wide range of Stainless Steel fasteners including Hexagon Head High Tensile Bolts Stainless Steel DIN 931 at cost-effective price available from A2Z Fasteners.

La vanne murale modèle VMU est une vanne murale à fermeture 4 côtés se montant sur mur ou parois. Elle est utilisée dans le traitement des eaux ( Station d'épuration , Station d'eau potable ) ​ TAILLES: de la section 200x200 jusqu’à 2000x2000 (version standard). Autres dimensions possibles sur demande. • La vanne murale modèle VMU/SCA a un orifice carré ou rectangulaire. Fabrication des vannes murale : inox 304 L ou inox 316L

Traitement de 210 à 600 gr. et réglable de 260 à 400 mm. Caractéristiques générales: Laminoirs très flexibles et performants. Réalisation en acier inox AISI 304, carter arrière en tôle blanche. Laminage "à froid", pâte à pizza, sur platines (rouleaux parallèles). Les rouleaux sont en téflon (alimentaire), épaisseur réglable, protection rouleau supérieur en plexiglas, inférieur en inox. Commandes à basse tension 24 V, à touches sensitives. Commande à pédale, livrée de série. Reference:P42/XV Marque:Diamant Europe Poids net (Kg):52 Dimension en MM (LxPxH):530x530xh730 Volume (M³):0,33 Puissance (kW):0,37 Alimentation (Volts):230/1N 50Hz HP:0,5

Mamelon double MALE/MALE

By the principle of operation, the coordinate punch press resembles an office paper puncher. The workpiece is pressed against the matrix. After that, a punching tool, the punch, strikes the workpiece with a force of up to 200 tons. In a fraction of a second, the punch and pressure ring return to their original position and the position-sensing mechanism moves the workpiece for the next strike. The capabilities of the equipment are not limited to the production of through-holes. Using punches of different sizes and shapes allows us to perform the most diverse tasks, such as countersinking, dimpling and forming. Modern coordinate punching machines are characterized by high productivity with moderate energy consumption.

Valvola a sfera a passaggio totale, filettatura M/F, con leva in alluminio.

Artikelnummer Bezeichnung Hinweis Verwendung / Funktion DS0391160V0600 Federstahlpuffer 600 - 1D Simplex BxHxT: 160x600x160 mm Interesse an diesem Produkt? Bestellen Sie mit der Artikelnummer direkt im Online-Shop! Die Bewertung aller Anfahrpuffer finden Sie in dieser Gesamt-Übersicht

dont 1 NZX2000 bibroches bitourelles NZ2000 équipé d’un robot articulé de chargement 1 Tour conventionnel RAMO 3 bi-broches:2 NLX2500 et 1 NL200000 4 SOMAB:OPTIMAB 550, OPTIMAB 400, UNIMAB 550, DELTAMAB 400

When the positioning cone and bush are mated, the balls are pressed together within the rubbers elastic range and thus locate the two parts in which they have been fitted, with maximum accuracy. To ensure that the rubber in which the balls are embedded is deformed within the elastic range, one must merely ensure that the depth of the hole into which the positioning bush is later pressed is precisely observed. The positioning cone is supplied ready to fit into the positioning bush and must simply be fitted into the counterpart component. Henceforth, a precise zero point positioning system is in place. Reference:03152-10 Temperature range:+80 °C

Nous façonnons vos flexibles inox selon votre besoin !

Copper base spring material, corrosion resistance, contact springs and diaphragm - Phosphor Bronze A is a Copper base spring material with a good combination of strength, formability, and corrosion resistance. The material is suitable for use in certain contact springs and diaphragms. The alloy has good formability up to moderate strength. It can be soldered, silver brazed, and resistance welded. Available Sizes: Phosphor Bronze A is available from Hamilton Precision Metals as strip products in thicknesses from 0.001” to 0.020” (0.0254 mm to 0.508 mm) in widths up to 12.0” (304.8 mm). The material conforms to ASTM B 103 and UNS C51000. Density:0.320 lbs/cu.in. Melting Point (Approx.):950°C Electrical Resistivity @ R.T.:11.5 Microhm·cm Thermal Expansion Coefficient (20° to 300°C):17.8 X 10-6/°C Thermal Conductivity @ R.T.:69.2 W/m·K Magnetic Attraction:None

The withdrawal system can be used to dispense high-purity liquids quickly and without complications. An excess pressure is produced in the container with pressurised gas (compressed air or nitrogen), thereby pumping the liquid out of the tank. The advantage of operation using pressure gas is that the user can extract even large amounts without effort while having both hands free to dispense the solvent. In this way, large amounts of hazardous media such as acetone, ethanol and methanol, etc. can also be safely dispensed and accurately metered using the stop cock. For use with media sensitive to oxygen or for ultra-pure media, operation with an inert gas (e.g. nitrogen) is possible. The barrel screw connection and shut-off valves seal off the barrel and pump hermetically. This means that no vapours containing solvents can escape after dispensing, thereby protecting users' health and the environment. Purpose:for barrels up to approx. 220 l Pump capacity approx.:10 l/min

Sculpture «Elephant» - Garden products Height:2043 mm Width:3160 mm Depth:992 mm Material:сorten steel

Ecrous Autofreinés Hexagonaux - Tout Métal (ECR INDESS Tout métal / STOVER) Inox A2 - TYPE DIN 980 Base DIN 934 Existe une variante en Inox A4

Tous les outillages sont fabriqués en nos ateliers à l’aide de systèmes CADCAM. Nous disposons d’un parc machines moderne et performant. L’électroérosion et le fraisage sur des machines CNC sont les principales composantes de ces ateliers. La fabrication d'outillages constitue un de nos points forts depuis la création de notre entreprise. Vous avez l'idée, nous la réalisons.

Atendendo às exigências de mercado e às actuais tendências de gestão de produção conhecidas por “Lean Production”, temos observado um crescente interesse por uma automação dos métodos de quinagem. As células de quinagem respondem em grande parte aos requisitos de qualidade do produto, gestão de produção e segurança em ambiente industrial, com maior ou menor aplicação de componentes periféricos necessários às várias operações de transformação das peças. Principais Características: - Número elevado de graus de liberdade controláveis - Facilidade de efetuar percursos complexos sem grande precisão e rapidez, sobretudo os modelos antropomórficos - Elevada eficiência - Possibilidade de gestão “offline” - Elevada produtividade - Rentabilidade de retorno financeiro quase imediato, pela redução do custo fabril

High Accuracy Taper and External Diameter Wide range of Sizes Available These reduction bushes allow for the fitting of boring bars and drills with a tapered shaft. All sizes are manufactured in a range of capacities. The sleeves are hardened and ground for a good fit for both the holder and the shaft. Estimated delivery:3-5 Working Days (subject to availability)

These eccentric bushes can be used as e.g. stops or tolerance compensators. 1) DIN 332-1 centre bore, Form A 2) Basic form with centring 3) With scale groove for visual stop 4) Through hole 5) Tapped hole Advantages: Easy handling Grub screw clamping Minimal installation space Arbitrary mounting position Customised application Versatile use Reference:03331 Material:Stainless steel 1.4305 Version:Bright

ABES Poller 022 ist ein nach oben leicht konisch zulaufender Absperrpfosten aus Aluminiumguss mit mehreren, im mittleren Teil eingegossenen vertikalen Vertiefungen. Der obere Bereich setzt sich durch einen umlaufenden Ring, eine glatte Oberfläche sowie ein etwas überstehendes und leicht spitz zulaufendes Kopfteil optisch ab. Der Fußbereich ist durch einen glatten, durch zwei umlaufende Ringe eingefassten Sockel gekennzeichnet. Befestigung Zum Herausnehmen mit 3p-Technologie. Alternativ: Version zum Einbetonieren. Ausführung – Pulverbeschichtung in Standard-RAL-Farben oder DB 703. Die Grundausstattung für ABES Poller 022 mit 3p-Technologie umfasst: – Poller, Aluminiumguss, pulverbeschichtet nach RAL oder DB 703 Eisenglimmer – Abmessungen (H über Grund x Ø in mm): 935 x 140 – Bodenhülse 300 mm (000.001), verzinkt – Verbindungsstück (000.008), verzinkt – Spannkegel-Paar 6-Kant (N1+N2+6-Kantschraube), Edelstahl 1.4301 (000.004) Typ:für öffentliche Bereiche, für Schulen, für öffentliche Einrichtungen, für Kindergarten, Parkplätze Material:Aluminiumguss Eigenschaft:ortsfest, herausnehmbar mit 3p-Technologie

Mousqueton belier acier (20 mm - Nickelé) - Fixation / Serrage

POSITION GALVANIZED AND COATED RED COLOR

7 (6 x 37 M-SFC) 1770 N/mm²

Urethane casting is a fast and cost-effective method of producing small series from a silicone mold. A silicone mold is made with the help of a prototype which serves as the basis for the duplication process of the original piece. Thanks to the flexibility of the silicone, complex intermeshing geometries can be achieved without demoulding problems. The base material used for the reproductions is a liquid polyurethane resin which with the use of additives can simulate the properties of a wide variety of plastics. Between 15 and 30 parts can be produced depending on the requirements of the material and surface finish. This method is ideal for the production of small batches and prototypes in which the production of expensive injection molding tools is not feasible. Industries Applied:Medical Device Industries Applied:Scientific Instrument

Vis à Métaux Tête Fraisée Fendue Laiton - DIN 963

YGK ContiNi R6 Plus - YGK Satin Nickel Type:Stainless steel effect Application:Rack OEM Colour Shade:Porsche (Galvano silver 09) BMW (Chrom Pearlgrey)