Izdelki za jeklena jekla (26213)

Square Nuts (ECR SQUARES) Stainless Steel A2 - DIN 557

M22 x 30mm Set Screws Hex Bolts Stainless Steel A2 - DIN 933. A wide range of Stainless Steel fasteners including Hexagon Head Set Screws Stainless Steel DIN 933 at cost-effective price available from A2Z Fasteners.

The innovative SANHA installation system NiroTherm® combines high-quality NiroTherm® press fittings with a black sealing ring made from EPDM (=ethylene propylene diem rubber) and NiroTherm® stainless steel system tubes. The system is produced from the material 1.4301 (AISI 304). Due to the well-known corrosion resistance of stainless steel, NiroTherm® offers installers therefore a real alternative compared to conventional steels when it comes to closed systems in humid atmospheres such as screed. Since it needs considerably less isolation against humidity*, the installation is faster and labour costs accordingly lower. In addition to the system description, NiroTherm® system press fittings are marked on the outside with a red dot. * This does not affect thermal insulation necessitated by national energy efficiency laws. NiroTherm® system pipe, material no. 1.4301, reduced wall thickness, in 6 m lengths, for cooling, compressed air, heating and industrial applications

Wall crochet (u type) - MAUNTING CLIPS

tarre WELLENKUPPLUNG - WSR 410 mit PFN - EDELSTAHLAUSFÜHRUNG Kupplung starr • Drehmoment: TKN= 2,7 - 340 Nm • Bohrungsdurchmesser: ØD= 6 - 85 mm • Bohrungstoleranz: +0,05 • starre Kupplung • Made in Germany

Jet Pulse Torbalı Filtre Jet pulse torbalı filtreler endüstriyel proses gazlarını veya imalat süreçlerinde oluşan tozların bertarafında ya da geri kazanımında yoğun olarak kullanılmaktadır. Bu sistemler çelik yapı içinde optimum sayıda ve tozun niteliğine uygun olarak seçilmiş filtre torbaları , basınçlı filtre temizleme hava sistemi, hava kilidi , konveyör ünitesi , otomatik kontrol sistemi ve fandan meydana gelmektedir. Jet Pulse Torbalı Filtrelerde Bertaraf edilmek istenen toz yada proses gazları filtrelere torbaları üzerinde toplanır, basınçlı hava ile torba filtreler temizlenir, sistemde toplanan katı malzemeler biriktirme bunkerinde biriktirilir, hava kilidi yardımı ile geri kazanım konveyörlerine ya da Bigbag çuvallarına aktarılır.

Kamlock Mutterteil - Typ A - mit Innengewinde - Edelstahl - nach EN ISO 14420-7 Diese Kupplung ist sehr schnell und einfach zu verbinden und zu lösen. Montagefreundlich mit Hebeln, kein Werkzeug wird benötigt! Sie können von uns das komplette Kamlock Programm erhalten. Ab gewissen Mengen sind auch Sonderanfertigungen und Modifikationen möglich. Norm:EN ISO 14420-7 (vormals DIN 2828) Variation:Mutterteil Typ D mit Innengewinde Material:Edelstahl (AISI-316) Hebel:Edelstahl (AISI-304) Dichtung:NBR und PTFE, Gewindedichtung, weiß Optional erhältlich:Verschiedene Dichtungsqualitäten für das Mutterteil

E (Integrity): hot gas and flame-proof the endurance of the door The mortality in fires incurs fire by fainting because of being affected by smoke. I (Insulation): the endurance of responding to the temperature of the surface which incurs flame. In other words, transferring the heat to the flame’s other side. A door with EI120 certificate has all fire resistance. B-DOORS fire doors have the certificate of EI-120

Piton à oeil en inox 316 de dimensions 6 x 60 mm. Ce piton peut être utilisé pour la fixation des chapes de tendeurs pour câble 3 et 4mm. Vissé dans un mur en matériaux plein avec une cheville nylon S10, ou directement, avec un avant-trou, dans un support bois. Référence:9000.0660.6000 Type de vis:Bois et Béton Dimensions:6 x 60 mm

In ultrasonic systems, the booster functions as a transmission tool to change the amplitude provided by the converter. It then forwards it to the sonotrode of the oscillating system. Depending on the design and installation direction, the amplitude can be reduced or increased by the booster. The booster is also suitable to embed the vibrating system into a machine if a clamping or tension ring is attached to it. soniKKs boosters stabilize the vibration behavior and ensure lossfree transmission through completely flat coupling surfaces. We usually manufacture our boosters from titanium. This material maintains its positive properties even at high temperatures. It has an exceptionally high corrosion resistance and belongs to the light metals. We are happy to match our boosters to your specific needs. Your Advantages “Made in Germany” Usually made of titanium Lossfree transmission due to optimally processed coupling surfaces Suitable for the food and pharmaceutical industry Ratios:1:1 to 1:2.5 Frequencies:20 kHz to 90 kHz Power:100 W to 6000 W Optional:with clamping ring/holder, with O-rings

Pied inox, à tige filetée, avec semelle noire MATIERE - Base et écrou en inox (AFNOR Z 6 CN 18-09, Werk 1.4301, AISI 304), mat ou poli. - Tige filetée inclinable en inox (AFNOR Z 8 CNF 18-09, Werk 1.4305, AISI 303). - Semelle collée ou vulcanisée en caoutchouc Perbunan (NBR), noir, 80 ±5 shore A.

Nos tables armoires, fabriquées en inox AISI 430 ou AISI 304, avec portes coulissantes et étagère intermédiaire sont spécialement adaptées aux cuisines professionnelles, à l'Horeca/CHR et aux collectivités. De structure robuste, nos tables armoires en inox sont équipées de 4 pieds à vérins pour leur mise à niveau et réglage en hauteur. Nos tables armoires inox sont disponibles en version « centrale » ou en version « avec dosseret ». L’étagère intérieure intermédiaire en inox est réglable en hauteur pour une meilleure adaptation aux nécessités de l’utilisateur. Nos plonges à monter avec tablette inférieure en inox sont spécialement adaptées aux cuisines professionnelles, à l’Horeca et aux collectivités. De structure robuste, nos plonges à monter sont équipées de 4 pieds à vérins pour leur mise à niveau et réglage en hauteur. Sur demande, la tablette inférieure inox peut être remplacée par 3 longerons tubulaires carrés en inox, 1 longeron longitudinal et 2 longerons latéraux. Nos...

Schwerkraft-Tragrollen von TRAPOROL sind für einen schnellen, schonenden, sicheren und effizienten Transfer unterschiedlichster Transportgüter in nicht angetriebenen Fördersystemen konzipiert. Je nach Anforderung und Aufgabenstellung werden die Rollen gefertigt und ausgeführt – aus Stahl, verzinktem Stahl, Edelstahl oder Aluminium. Für jeden Rollentyp sind zudem verschiedene Beschichtungen möglich.

Glass 2

Barre ronde inox Exécution:Transformé à froid ; Laminé à chaud ; Forgée Dimensions:Ø 12 à 350 mm Tolérance:ISO h9 ; Aucune

Wire Diameter: Ø4.00 mm Mesh Size: 76.2x12.7 mm Length: 2500 mm Height: 750 – 3000 mm Coating: Hot-dip galvanized or preferred RAL color

With press capacities between 15 and 500 MN, Siempelkamp's closed-die forging presses oer the optimal solution for numerous application areas. The optimal relationship between press dimension and press force oers our customers maximum benets. Best process and system parameters are the guarantee for high dimensional and repeat accuracy. Siempelkamp supplies hydraulic closed-die forging presses for many dierent application areas. According to the application area, guidance accuracy, cycle time, eccentricity, and speed are optimally adjusted with one another. Depending on the customers' requirement, Siempelkamp's closed-die forging presses are available in dierent designs - as push down and pulldown presses. If desired we can supply these presses as part of a complete solution, from the press segment to the forging plant.

Granalla de Alambre : este granalla proviene del corte del alambre. Dependiendo de la materia prima utilizada se obtienen diferentes durezas, lo que permite aportar distintas esfericidades (G1, G2 y G3). Dureza: 44-56 HRC Forma: cilíndrica o esférica (G1, G2 o G3) Densidad: 7,4 g / cm3

Italgomma2 dispone presso il suo magazzino di tutta la gamma di tubo ASME BPE SF1 316L dal ½” al 4”. I tubi marchiati esternamente con il n° di colata per l’identificazione e la finitura interna è di Ra <0,5 μm, esterna Ra <0,8 μm. I tubi sono chiusi alle estremità con tappi in plastica e protetti esternamente con film plastico. La lunghezza standard nominale è di 6 m.

Robust aluminium case - Stainless steel shaft, Ø 10f7 shaft with flat (9 -0.1 mm), RS bearing with NILOS ring - Potted housing for IP 69K protection - Electrical connection via 2 sensor plugs (M12 plug, 5-pin, pins) for bus 1 and bus 2. One hex rotary coding switch each for setting the address under the blind plug Interface:CANopen Design:58mm Housing material:Aluminium 3.2315 Special feature:Redundant Flange and shaft:Synchroniser flange, shaft 12mm Single- or Multiturn:Singleturn Resolution:16384 steps/revolution 14-bit Code type:Binary Profile:Standard CANopen C3, Profil No. 4.0.2 Electrical connection:M12 connector

KUPFERDRAHT FÜR ELEKTRISCHE ANWENDUNGEN Material mit verzinnter, vernickelter oder anderer Oberflächenausführung auf Anfrage lieferbar.

Sinterfiltri oltre all'ampio catalogo di filtri rondelle in bronzo sinterizzato è in grado di realizzare filtri speciali a disegno su specifica richiesta del cliente, per diversi ambiti d'applicazione e utilizzo industriale e non solo, CARATTERISTICHE del prodotto: Composizione: 89% rame 11% stagno Densità: da 4,5 a 5,5 gr/Cm3 Porosità: da 30% a 40% Resistenza alla trazione: da 3 a 5 Kg/mm2 Allungamento: da 2% a 3% Soglia di filtrazione: da 5µ a 120µ Temperatura di impiego: fino a 200°C in ambiente ossidante fino a 450°C in ambiente riducente Tolleranze di esecuzione: + - 3%

Die 400 A Inverter-Schweißmaschine aus der CPTX Reihe besticht durch eine hohe Zündsicherheit und 100% Einschaltdauer. Das heißt egal wie lang Sie damit auf höchster Leistung schweißen wollen, die Maschine bringt sie. Wie die Norm es vorschreibt, ist diese Maschine stufenlos einstellbar und eignet sich ideal für die Industrie und für einfache Schweißaufgaben. Diese Maschine wird standardmäßig mit Trolley und Drahtvorschub geliefert und ist zudem noch von Werk aus mit einer Wasserkühlung versehen.

Kaynak pozisyonerleri standart büyüklükte,250 kg dan 30000 kg a kadar yükler için mevcuttur. Pozisyonerlerin yapısı tablanın dönme ve öne-geri eğilmesi için en uygun konfigürasyona göre tasarlanmıştır. Pozisyonerler gövde, Motor, tabla döndürme ve eğme sistemleri, elektrik pano ve uzaktan operatör kontrol ünitesinden oluşmakta ve yapısal en iyi korumaya sahiptir. Ağır iş parçaları için pozisyonerler zemine sabitlenirler. Tablada isteğe göre veya standart olarak T-slotlar mevcuttur ki iş parçasını hızlı sıkma sına imlan verir. Tabla döndürme ve öne-geri eğilme çelik düz dişli aktarma sistemleriyle yapılmışlardır. Tabla dönüş hızı, operatörün çok kolay bir şekilde ayarlayabileceği 5m kabloya sahip uzaktan kumanda sisteminden yapılmaktadır. Opsiyonel olarak tüm modellerde PLC uygulanabilir.

Fly through the air Material:W.Nr. 1.2083 Hardness:42-48 HRC

Der Turbinenemulgator ist ein Koaxial- und Dreifachmischer, der sich für die stabile Homogenisierung und Emulgierung eignet. Der Vakuum-Emulgator-Mixer ist speziell für die Herstellung von Salben und die Verarbeitung von Kosmetika konzipiert.

Product specifics: Stainless steel western bit, SS correction mouthpiece w/copper barrels. SS cheeks. Mouth size:5" Cheek length:19.5MM. Mouth thickness:12 to 13MM Material :Stainless steel Mouth size:5" Cheek length:19.5MM Mouth thickness:12 to 13MM

Sono stampate con acciaio di qualità per le normali applicazioni o con acciai inossidabili AISI 304, 316 per applicazioni speciali: • Realizzate per durare nel tempo garantiscono robustezza e solidità abbinata ad un’ ottima resistenza all’usura ed alle sollecitazioni meccaniche. • Il profilo parabolico permette di guidare il getto del prodotto verso lo scarico evitando dispersioni che ricadano nel piede dell’elevatore causando diminuzioni di portata. • Le superfici liscie e arrotondate permettono Io scarico rapido e totale della tazza e la sua pulizia immediata. • Sono particolarmente indicate per il lavoro intenso, per trasporti gravosi anche delle grosse granulometrie. • Le tazze vengono prodotte con lamiera di spessore standard come indicato nelle tabelle o con spessori maggiori secondo le Vostre esigenze. • I fori sono bombati per garantire una perfetta tenuta del bullone la cui testa si inserisce completamente nella cinghia.

Paslanmaz çelik iç köşe fayans profili, farklı renk ve ölçülerde imalat yapılır, minimum 10 adet sipariş.

Plastic Metal Ball Joint Q011 Material Information:Steel ,DIN 1.0718 Compatible with:S15, S18 Components:Q001, PA14 Unit Weight:0,014 KG