Izdelki za jeklenih palic (40)

Barre d'acciaio pelate dal Ø20 al Ø120 con asportazione da 2 a 5 mm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Helix steel aisi Helical bar in AISI 304 stainless steel, cold drawn, with high mechanical performance, for the reinforced styling of joints and for connections, including through-holes, on masonry, reinforced concrete, arches and vaults. Suitable for the consolidation of structures in seismic areas; advantageous in combination with hydraulic binders (cement and hydraulic lime) and with resin matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on the stripped joint. Helix Steel AISI 304 bars are available in a range of diameters: 6, 8, 10 or 12 mm, all characterised by their durability even in aggressive environments, their high tensile and shear strength, and excellent flexibility. Such characteristics make the use of these bars particularly advantageous in combination with hydraulic binders (cement, hydraulic lime), air binders (air lime) and resinous matrix binders. Flexibility, handling and versatility with various binder matrices, permit the realisation of rapid, non-invasive reinforcement operations, being easy to apply and with low installation costs. Very high mechanical physical benefits come when combined with our mortars of the REPAR, GROUT and Unisan lines and the structural resins of the SYNTECH line. Reinforcement operations on concrete and masonry structures. Reinforced pointing of joints. Structural one-sided connections or through-holes crossing the entire section. Helical morphology allows optimal gripping on bricks, mortars, stones and on old walls of historical and cultural interest generally. The durability against atmospheric and environmental conditioning makes the use of Helix Steel AISI 304 bars particularly advantageous in the structures affected by the presence of aggressive soluble salts (sulphates, nitrates, phosphates). Reinforced pointing of joints: Deep stripping of joints can ensure the placement of the bar at a depth of a few centimetres from the surface. To remove any loose and crumbly parts (stone, bricks, enticing mortar, etc.). Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Connections on masonry, concrete, arches and vaults: Make sure that there are no loose or crumbly parts on the substrate. Stripping of mortar joints. Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Reinforced pointing of joints: Reinforced pointing of masonry joints by filling part of the joint profile with an initial layer of Unisan fibre-reinforced composite mortar (see the data sheet), then on the mortar whilst still wet, inserting the Helix Steel AISI 304 bar before covering with a final layer of Unisan mortar. Press the mortar inside the joint, being sure to press well until totally full and flush with the wall. The temperature of the substrate must be between +5° and +35° C. Connections on masonry, concrete, arches and vaults: After carefully preparing the substrate and before applying the first layer of structural mortar (lime- or cement-based depending on the type of operation), wet with water at low pressure until complete saturation, bearing in mind that a lack of saturation may prevent adhesion and cause cracking in the mortar. If necessary, apply a rough coat of Untersana mortar. Proceed with creating holes of a suitable diameter and inclination (at 45° if the operation is undertaken only on one side of the structural element). Before they are bent in anticipation of the mesh, the connectors emerge from the substrate by at least 10–15 centimetres from flush with the wall. Apply an initial coat of Unisan fibre-reinforced composite mortar (see the technical data sheet) by hand (with stainless steel trowel or putty knife) or with a plastering machine to achieve a thickness of about 1.5 centimetres, leaving the surface sufficiently rough to facilitate the adhesion of the subsequent layer. Alternatively, depending on the structural requirements, mortars of the REPAR line can be used. Place the primed alkaline-resistant fibreglass mesh of the ARMAGLASS STUCTURA line (see the technical data sheet of the selected product), placing it on the still-fresh mortar by passing the Helix Steel AISI 304 connector between the bars of the mesh. After bending the connector, restraining the mesh, apply a second finishing layer of mortar (Unisan or REPAR) at a thickness of about 1.5 centimetres. Product to be purchased as needed. Packaging: Roll of 10 meters UM: €/kg

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

Cold drawn bars (+C EN 10277) Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 8,00 ÷ 74,00 ( ≥IT9 ) EN 10278

Scaffali in acciaio inox a 4 ripiani lisci o forati, diverse lunghezze, altezza 2000 mm, profondità 450 o 550 mm.

DESCRIZIONE MACCHINARIO Impianto robotizzato pallettizzazione barre acciaio

BARRE / SPEZZONI FILETTATI FILETTI PARZIALI - TOTALI - SU DISEGNO SECONDO NORME DIN / ISO / UNI / NFE / ANSI FILETTATURE METRICHE ED IMPERIALI MATERIALI: ACCIAIO ZINCATO, ACCIAIO INOX, LEGHE DI NICKEL, TITANIO, OTTONE, ALLUMINIO, DUPLEX, SUPER-DUPLEX, GRADI ASTM, MONEL, ERGAL, NIMONIC TRACCIABILITA' COMPLETA CON CERTIFICATI DI ACCIAIERIA EMISSIONE CERTIFICATI 2.2 - 3.1 - PPAP LEV.3 - IMDS - VDA LEV.2 EMISSIONE ANALISI CON SPETTROMETRO FISSO (30 ELEMENTI)

Versatili basi barra seno utilizzabili per lo staffaggio e le lavorazioni di particolari meccanici. Facilmente riconfigurabili come squadra 90°

Barre Cromate diametri da 6mm a 500mm C45, 20MnV6, 42CrMo4, 38MnVS Rating 9 Disponibili soluzioni personalizzate su richiesta.

Product Diameter Tolerance Reference WIRE IN BARS Bright Wire Black Annealed Wire Bright Annealed Wire Galvanized Wire Cut on demand (from mm 200 to mm 4000) 1,50 mm ÷ 10 mm ± 0,5 mm (from mm 200 to mm 1500) ± 1 mm (from mm 1501 to mm 3000) ± 2 mm (from mm 3001 to mm 4000) UNI EN 10277 WIRE IN BARS WITH LOOPS Black Annealed Wire Bright Annealed Wire Galvanized Wire Cut on demand (from mm 2000 to mm 6000) 2,50 mm ÷ 3,50 mm ± 2 mm

La nostra produzione comprende trafile piatte in metallo duro. Possono essere rivestite in PVD/CVD per una maggiore durabilità del prodotto.

Gabrieli srl è una realtà bresciana specializzata nella tornitura automatica monomandrino e nelle lavorazioni meccaniche su macchine transfer e centri di lavoro. Lavoriamo esclusivamente secondo il disegno del cliente e la ns. competenza principale risiede nella lavorazione di leghe di ottone. Alcuni esempi di prodotti che realizziamo su specifica del cliente: raccordi nipples, dadi, controdadi, rosette, bocchette, maniglie, ghiere, attacchi portagomma, raccordi ogiva, calotte, manicotti, tappi filettati, raccordi aria, raccordi a saldare, ecc. I nostri clienti sono attivi in un'ampia gamma di settori industriali tra cui: rubinetteria, valvolame, raccorderia, riscaldamento, produzione di tubi flessibili, impianti gpl, idraulica ecc. Gabrieli srl ist auf automatendrehen und auf die Bearbeitung von Warmpressteilen spezialisiert. Einige Produktbeispiele: Schlauchverbinder, Tauchhülsen, Holländer-Verschraubungen, Muttern, Muffen usw.

Dalla barra estrusa al finito con tempi ciclo imbattibili Il Transfer da barra, rappresenta l’alternativa ai torni plurimandrino fornendo alcuni vantaggi che rendono tale prodotto estremamente competitivo.

Barre in acciaio sottoposte a 3 diversi passaggi: Sgrossatura Rettifica di semi-finitura Rettifica di finitura Che garantiscono alta precisione dimensionale e tolleranze minime per applicazioni industriali: Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Barre in acciaio rettificate e cromate per cilindri oleodinamici e pneumatici Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT Acciai disponibili:Inox AISI 304/316/431

200 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm. Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

500 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Doppio riporto di cromo 25µm+25µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

96 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 10 ISO 10.289 e 300 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto di cromo maggiorato ≥ 35µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

500 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Doppio riporto di cromo 25µm+25µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

96 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 10 ISO 10.289 e 300 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto maggiorato di cromo ≥ 35µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

200 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto standard di cromo ≥ 20µm Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

WEIGHING BARS FPPMB SERIES - INDICATOR EXCLUDED Pair of weighing bars suitable for weighing boxes or pallets such as hoppers, conveyor belts, roller conveyors, tanks, crates, etc. They can be applied in packaging lines for weighing boxes and pallets pre-filled with material. CE-M verifiable standard version for sale to third parties. TECHNICAL FEATURES - Functioning with 4 shear-beam approved IP68 stainless steel load cells (PMBL) and with 2 approved off-center aluminum load cells (PMBS-PMBM-PMBX), according to OIML R60 standards with protection against dust and humidity according to IP65 standards (350 Ohm input resistance). The price indicated refers only to weighing bars. The photos are purely indicative and show the various applications of the bars (*) CE-M divisions obtainable only with the relative options, combined with our indicators. Example model:PMBSI150 Dimensions (LxPxH) mm.:400x80x105 Load max kg:150 Standard division g:20 CE-M divisione g (*):50

Ground bars Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 6,00 ÷ 200,00 (IT9 ÷ IT6) EN 10278

Peeled & reeled bars (+SH EN 10277) Alloy Steel, Non-Alloy Steel and Stainless Steel Ø 10,00 ÷ 200,00 ( ≥IT9 ) EN 10278

Sidergamma offre l`opportunità di fornire materiale lavorato secondo disegno del cliente. Le barre e i tubi lavorati su disegno sono ideali per applicazioni in ambito idraulico, oleodinamico e pneumatico, ma anche per numerosi altri settori industriali. Realizzati in materiali di alta qualità, come acciaio al carbonio, acciaio inox e leghe speciali, questi componenti sono sottoposti a rigorosi processi di controllo qualità, tra cui trattamenti termici, rettificatura, cromatura e pelatura, per garantire resistenza, durevolezza e performance elevate. Il nostro approccio personalizzato consente di creare tubi e barre su misura che rispettano al massimo le tolleranze richieste e le specifiche di resistenza a sollecitazioni meccaniche e corrosione. Siamo in grado di produrre componenti di diverse lunghezze, diametri e configurazioni, con un controllo costante della rugosità superficiale, della qualità cromatica e della resistenza alla corrosione. Vantaggi principali: Produzione su misura in base al disegno clie

TABLETOP VACUUM PACKAGING MACHINE DZ 400 2T WITH TWO SEALING BARS Tabletop vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420x70/130(H) Vacuum pump:20 m³/h Working cycle:about 30 sec

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

Product Diameter Tolerance Reference Black annealed wire 0,70 mm ÷ 10 mm ± 0,05 mm UNI EN 16120-2 Black annealed wire cut in bars Cut on demand (from mm 200 to mm 4000) 1,50 mm ÷ 10 mm ± 0,5 mm (from mm 200 to mm 1500) ± 1 mm (from mm 1501 to mm 3000) ± 2 mm (from mm 3001 to mm 4000) UNI EN 10277 Black annealed wire cut in bars with loops Cut on demand (from mm 2000 to mm 6000) 2,50 mm ÷ 3,50 mm ± 2 mm