Izdelki za kemično ločevanje (118)

Viacat 4202 (Dibutyltin dilaurate) is a yellow liquid which has C32H64O4Sn as chemical formula. It is used in the production of polyether and polyester based polyurethanes. Further it finds its application as catalyst in both adhesives and sealants. Other uses include heat stabilizer for PVC and room temperature vulcanization (RTV) of sillicone polymers. Dibutyltin dilaurate is also known as dinbutyldilauryltin, dibutylbis(lauroyloxy)stannane and dibutyltin didodecanoate. Availability Europe ViaCat 4202 (DBTDL) is on stock in our local warehouses. Our lead time is about one week if delivered in 25 KG drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:77-58-7 EC number:201-039-8 HS code:2931 90 00 Tin content:18.00 -19.00 % Moisture:<0.40 % Colour (Gardner):< 300 Boiling point:205 °C Density:1.043 g/ml @ 28.50 ºC Flash point:± 191.00 °C Melting point:28.50 °C Partition coefficient (log Pow):4.44 Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:7.7 x 10-6 Pa @ 25°C

AminCat A1 ( bis2dimethylaminoethylether ) is one of the most active amine blowing catalysts available. It consists of 70% bis (2Dimethylaminoethyl) ether diluted with 30% dipropylene glycol for ease and accuracy of metering. Although AminCat A1 catalyzes both the blowing and gelling reactions, its unique emphasis on the isocyanate reaction has established it as the industry standard for all types of polyurethane systems where efficient catalysis of the blowing reaction is required. Availability Europe and United States Provided AminCat A1 is on stock in our local warehouses our lead time is about one week if delivered in 170 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3033-62-3 EC number:221-220-5 HS code:2922 19 00 Assay:≥70.00 % Water:≤0.25 % Density:0.87 @ 20 °C Flash point:68 °C @ 99.86 kPa ± 4.07 Partition coefficient (log pow):-0,54 Solubility in water:1 000 000 mg/L @ 25 °C Vapour pressure:0.99 hPa @ 25 °C Viscosity:0.05153 mm2/s @ 20 °C

Günstig das vielseitig verwendbaren Phosphat kaufen

Günstig das vielseitig verwendbaren Phosphat kaufen

Enox 10150Dpd (25Dimethyl25ditertbutylperoxyhexane on silica, 50%) is a white powder which has C16H34O4 as chemical formula. It is used to for the crosslinking of natural rubber, synthetic rubber (such as silicone rubber) and as modification agent of polypropylene degradation. 2,5Dimethyl2,5di(tertbutylperoxy)hexane is also known as ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide, 2,5Dimethyl2,5bis(tertbutylhydroperoxy)hexane and Ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide. Availability Europe Provided Enox 10150DPD is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-63-7 EC number:201-128-1 HS code:2909 60 00 Appearance:White powder Assay:49.00 – 51.00 % Active oxygen:5.50% Density:0.30 – 0.50 g/cm3 Bulk density:450 kg/m3 @ 20 °C SADT:80 °C Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:2 kPa @ 25°C

Enox DCBP (Bis24Dichloro BenzoylPeroxide) is a white homogeneous paste in 50% silicone oil. This diacyl peroxide has C14H6Cl4O4 as chemical formula and is mainly used for low temperature crosslinking of silicone rubbers .The compounds can be cured without external pressure (hot air and/or IR crosslinking). Bis (2,4Dichloro Benzoyl) Peroxide is also known as 2,4Dichlorobenzoylperoxide and peroxide, bis(2,4dichlorobenzoyl). Availability Europe Enox DCBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:133-14-2 EC number:205-094-9 HS code:2916 39 00 Appearance:White to yellowish paste Assay:49.0 – 52.0 % Active oxygen:2.06 – 2.1 % Free chlorine:≤0.05 % Acidity as 2,4 dichlorobenzoic acid:≤0.5 % Volatile matter:≤1.5 % Relative density:1.25 @ 25 °C SADT:60 °C Solubility in water:Insoluble (<0.1 mg/l) @20°C

Protège les pierres naturelles de façon invisible, sans trace, sans foncer les pierres.

Catonium TPPBr (Tetraphenylphosphonium Bromide) is a white to offwhite, its chemical formula is C24H20BrP. TPPBr is a quaternary phosphonium salt mainly used in pharmaceuticals, as accelarator for fluoroelastomers , adhesion promotor for fluoroelastomers and curative of polyacrylate polymers which extends the shelf life of the compound and decreases the mould fouling. This material is highly soluble in water and slightly soluble in alcohols. Tetraphenylphosphonium Bromide is also known as TPP, TPPBr, TPPB and TPPBr. Compared to amines, imidazoles and quaternary ammonium salts CatOnium TPPBr features considerable better latency and thermal stability Further it offers a low odor, minimal color formation and controlled reactivity. Availability Europe and United States Provided CatOnium TPPBr is on stock in our local warehouses our lead time is about one week if delivered in 25 KG drums. CAS number:2751-90-8 EC number:220-393-4 HS code:2931 39 00 Assay:≥ 99.00 % Loss on drying:≤ 1.00 % Triphenyl phosphine:≤ 0.50 % Boiling point:457.77 ºC Flash point:> 260 ºC Melting point:294 – 297 °C Log Kow:5.28 Solubility in water:Soluble @ 20 ºC Vapor pressure:4.2E-005 Pa

In most polymers, Rostabil TNF (Trisnonylphenol phosphite) is a cost effective, high purity stabilizer that improves color and processing stability during recovery, drying, compounding, processing and end use. Synergism is realized when it is combined with other stabilizers such as hindered phenols. It may be added alone or in combination with the monomers and / or in antioxidant emulsions during recovery and / or during compounding. TNF is excellent in preventing gel formation polymerization, finishing, storage and factory processing. TNF is a versatile phosphite stabilizer which is useful in a large number of polymers such as polyethylene, polypropylene, polystyrene, HDPE, LLDPE, SBR, ABS, PVC and others. TNPP is also a suitable stabilizer for a myriad of elastomers such as SBR, NBR and SIS. It is highly effective in light colored solution and emulsion polymerized elastomers. The use of the TNF phosphite is sanctioned by the Food CAS number:26523-78-4 EC number:247-759-6 HS code:2920 29 00 Acid Value:≤0.3 (mg KOH/gm) Colour:≤60 (Hazen) Free nonylphenol:≤3.0 % Phosphorus content:4.30% Boiling point:>300 °C @ 102 kPa Decomposition temperature:322 °C under nitrogen Flash point:207 ºC @ 1 atm Melting point:+/- 6 ºC Partition coefficient (log Pow):21.60 ± 0.60 Refractive index:1.527 – 1.533 @ 25 °C Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:0.975 – 0.998/m3 (25 °C/15 °C) Vapour pressure:0.000000000005 Pa

Enox BPO 75W (Dibenzoyl Peroxide 75%) is a white particle moistened with 25% water. This diacyl peroxide has C14H10O4 as chemical formula and it is used as initiator for the (co)polymerization of styrene, acrylonitrile, acrylates, methyacrylates and vinylacetate. Further it is being used to cure unsaturated polyester, vinyl esther and acrylic thermosetting resins at ambient temperatures. Dibenzoyl peroxide also so known as benzoyl peroxide, BPO and benzoperoxide. Availability Europe Enox BPO 75W is on stock in our local warehouses. Our lead ime is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:94-36-0 EC number:202-327-6 HS code:202-327-6 Appearance:White particle Assay:72.0-76.0 % Active oxygen:4.75-5.02 Cl:≤0.20 % Free acid (as C6H6COOH):≤0.30 % (In)organic hydrolysable Cl:≤0.25 % Water:≥ 23.0% Melting point:103 – 105 20 °C @ 1.013 hPa Partition coefficient (log Pow):3.43 @ 20 °C Relative density:1.33 @ 25 °C SADT:80 °C Solubility in water:Slightly soluble (9 .1 mg/l) @ 25 °C Vapour pressure:< 1mm Hg @ 20 °C

Meldrum’s Acid is a white crystalline powder which has C6H8O4 as its chemical formula. It is also known as 2,2dimethyl1,3dioxane4,6dione or isopropylidene malonate. Shipment Info Europe and United States Provided Meldrum’s Acid is on stock in our local warehouses our lead time is about one week if delivered in 25 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2033-24-1 EC number:217-992-8 HS code:2932 20 90 Appearance:Almost white crystalline powder Assay:≥ 98.00 % Boiling point:304 °C @ 101 325 Pa Flash point:134 °C @ 101 325 Pa Partition coefficient (log Pow):4.786 @ 25 °C

Rostabil DPDP (Isodecyl diphenyl phosphite) is a clear liquid which has C22H31O3P as chemical formula. It it used as a color and processing stabilizer in polycarbonate, polyurethanes, ABS polymers, coatings and it is also used as a secondary stabilizer in PVC. Isodecyl diphenyl phosphite is also known as Diphenyl isodecyl phosphite and phosphorous acid, 8methylnonyl diphenyl ester. Shipment Info Europe Provided Rostabil DPDP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:26544-23-0 EC number:247-777-4 HS code:2920 90 85 Acid Value:≤0.1 (mg KOH/g) Colour:≤100 Hazen Boiling point:435.74 °C Flash point:130.0 ºC Melting point:154.75 °C Partition coefficient (log Pow):8.52 Refractive index:1.521 – 1.527 @ 20°C Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:1.020 – 1.036 g/m3 (25 °C/15 °C) Vapour pressure:2.07E-09 Pa @ 25°C

Enox DTBP (Ditertbutyl peroxide) is a transparant liquid which has C8H18O2 as chemical formula. This dialkyl peroxide is used as initiator for the production of Low Density Polyethylene (LDPE). Further it finds its application in the polymerization and copolymerization of styrene, olefins and acrylic resins and as modification agent of polypropylene degradation. Ditertbutyl peroxide is also known as DTBP, peroxide bis(1,1dimethylethyl) and tertButyl peroxide. Availability Europe Enox DTBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:110-05-4 EC number:203-733-6 HS code:2909 60 00 Appearance:light yellow transparent liquid Assay:≥98.00 % Colour:≤60 Fe:≤2 mg/kg TBHP:≤0.60 % Active oxygen content:≥10.72 % Conductivity:≥1000 pS/m Density:0.793-0.803 (d20/4) Flash point:6 °C @ 113 mBar Melting point:-18 °C Partition coefficient (log Pow):1.51 Refractivity:1.385 – 1.392 (n20/D) SADT:80 °C Vapour pressure:29 mBar @ 25 °C

Rostabil TPP (Triphenyl phosphite) is a clear liquid with has C18H15O3 as chemical formula. It is an organophosphite which provides excellent colour improvement and heat stability. It is used in ABS, polyethylene, polypropylene, polystyrene, polyester resins, epoxy resins and synthetic rubber. TPP is also known as Triphenyl phosphoric acid ester and Triphenoxyphosphine oxide. Availability Europe Rostabil TPP ( Trisnonylphenol phosphite) is on stock in our local warehouses our lead time is about one week if delivered in 225 KG drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:101-02-0 EC number:202-908-4 HS code:2920 29 00 Acid Value:≤0.50 (mg KOH/g) Colour:≤50 Hazen Phenol:≤1.00 % Phosphorus:9.80 – 10.00 % Boiling point:386 °C @ 101.63 kPa Flash point:218.30 ºC Melting point:144 ºC Partition coefficient (log Pow):6.62 @ 25 ºC Refractive index:1.18 – 1,186 g/l @ 25 ºC Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:1.170 – 1.195 g/m3 (25 ºC / 15 ºC) Vapour pressure:0.0000763 mm Hg @ 25 ºC

Rostabil TDP (Triisodecyl phosphite) is a clear liquid which has C30H63O3P as chemical formula. It is a trialkyl phosphite which is useful as a secondary stabilizer in ABS, PET (polyethylene terephthalate), PET fibers, coatings, lubricants, PVC, polycarbonate and polyurethanes. This material is also known as Phosphorus acid triisodecyl ester and isodecylphosphite. Availibility Europe and United States Provided Rostabil TDP is on stock in our local warehouses our lead time is about one week if delivered in 180 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:25448-25-3 EC number:246-998-3 HS code:2920 90 85 Acid Value:≤0.10 (mg KOH/g) Colour:≤50 Hazen Boiling point:485.52 °C Flash point:150 °C @ 1 atm Melting point:< -20 °C @ 1 atm Partition coefficient (log Pow):12.31 @ 25 °C Refractive index:1.4500 – 1.4610 Solubility in water:Insoluble (< 0.1 mg/l) Specific gravity:0.874 – 0.914 g/m3 (25 ºC/15 ºC) Vapour pressure:1E-09 to 5E-07 Pa

Rostabil DDPP (Diisodecyl phenyl phosphite) is a clear liquid which has C26H47O3P as chemical formula. It is an alkylaryl phosphite which finds its application as a color and processing stabilizer in ABS, polycarbonate, polyurethane, coatings and PET fiber where regulatory approval for food contact is not required. It can be used as a secondary stabilizer to improve color and heat stability in PVC. Diisodecyl phenyl phosphite is also known as phosphorous acid diisodecyl phenyl ester and Phenyl diisodecyl phosphite. Availability Europe Provided Rostabil DDPP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:25550-98-5 EC number:247-098-3 HS code:2920 90 85 Acid Value:≤0.1 (mg KOH/g) Colour:≤100 Free phenol:≤1.0 % Boiling point:478.99 °C Flash point:296.30 °C Melting point:90.17 °C Partition coefficient (log Pow):9.32 @ 25 °C Relative density:0.94 – 0.96 @ 20 g/ml Refractive index:1.4800 – 1.4860 @ 20 ºC Solubility in water:0.182 mg/l Specific gravity:0.930 – 0.950g/m3 (25 ºC/15 ºC) Vapour pressure:0.0076 Pa @ 25 °C

Enox 101 (25Dimethyl25ditertbutylperoxyhexane) is a yellowish liquid which has C16H34O4 as chemical formula. It is used to cure polymers and elastomers, mainly polyethylene ( LDPE, HDPE), ethylene propylene diene monomer (EPDM), sillicone rubber and fluoroelastomers. Further it acts as initiator for the production of controlled rheology polypropylene (CRPP). 2,5Dimethyl2,5di(tertbutylperoxy)hexane is also known as ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide, 2,5Dimethyl2,5bis(tertbutylhydroperoxy)hexane and Ditertbutyl 1,1,4,4tetramethyltetramethylene diperoxide. Availability Europe Enox 101 (DHBP) on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-63-7 EC number:201-128-1 HS code:2909 60 00 Appearance:yellowish transparent liquid Assay:≥94 00 % Color:≤60 TBA:≤0.50 % DTBP:≤0.50 % Cyclig (TMDOCH):≤5.00 % DHBBP/mono:≤1.00 % Fe mg/kg:≤1 Boiling point:306.50 °C ± 25 °C @ 760Torr Density:0.872 g/cm3 @ 20 °C Flash point:68 ºC Partition coefficient (log Pow):7.34 Melting point:8 °C @ 1 atm Refractivity:1.420 – 1.425 Solubility in water:1.420 – 1.425 Solubility in water:Insoluble (< 0.1 mg/l) SADT:80 °C Vapour pressure:0.185 Pa @ 25°C Viscosity:7.35 mPa.s @ 12 rpm (20°C)

Auftausalz kaufen – das schnelle Mittel zur Herstellung der Verkehrssicherheit

Enox BPO50FM (Dibenzoyl Peroxide DCHP) is a white fine granular powder in 50% diclycohexyl phthalate. This diacyl peroxide has C14H10O4 as chemical formula and it is used to cure unsaturated polyester resins and acrylic resins at both ambient and elevated temperature. Dibenzoyl peroxide also so known as benzoyl peroxide, BPO and benzoperoxide. Availability Europe Provided Enox BPO50FM is on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:94-36-0 EC number:202-327-6 HS code:2916 32 00 Appearance:White granular powder Assay:48.0 – 51.0 % Active oxygen:≤0.50 % Cl:≤0.40 % (In)organic hydrolysable Cl:≤0.50 % Water:≤1.00 % Melting point:103 – 105 20 °C @ 1.013 hPa Partition coefficient (log Pow):3.43 @ 20 °C Relative density:1.33 @ 25 °C Solubility in water:Slightly soluble (9 .1 mg/l) @ 25 °C Vapour pressure:< 1mm Hg @ 20 °C

Disodium44bis2sulfostyrylbiphenyl (Viobrite CBS) is a yellow free flowing fine granule which has the chemical formula C28H20O6S6Na2. Viobrite CBS has a higher yield of whiteness than the classical stilbene type brighteners. It finds its application in houselhold detergents. Besides it is being used in coatings and textiles. This substance is also known as Fluorescent Brightener FWA5, Distyrylbiphenylsulfonate, Fluorescent Whitener CBS and FBA 351. Availability Europe and United States Provided Viobrite CBS is on stock in our local warehouses our lead time is about one week if delivered in 25 KG cartons. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:27344-41-8 EC number:248-421-0 HS code:3204 20 00 Appearance:Yellowish free flowing fine granule Active content:≥95 % 1% E-value:1105 ~ 1181 Extinction value:0.829 – 0.885 Maxim absorption wave length:348 ± nm Moisture:≤ 5.00 % Autoignition:580 ºC Bulk density:550 – 670 g/l Density:1.49 g/cm3 (22 ºC) Melting point:>300 ºC Partition coefficient (log Pow):-2.32 @ 25 ºC / pH 6.8 pH value:7 – 8.5 Solubility in water:17.6 g/l @ 20 ºC / pH 6.7

Enox CH (1,1Di(tertbutylperoxy)cyclohexane in white oil) is being used in the production of (expanded) polystyrene and SMC/BMC. Also available Enox CH40MO and Enox CH50MO (40% and 50% white oil diluants) Availability Europe Enox CH80MO is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3006-86-8 EC number:221-111-2 HS code:2909 60 00 Appearance:Light yellow transparent liquid Assay:78 – 80.0 % Active oxygen:9.58 – 9.84 % Color:≤60 Hazen Hydroperoxide as TBHP:≥ 0.5 % Relative density:0.884 @ 20 °C Melting point:-25° Partition coefficient (log Pow):7.2 @ 25 °C SADT:60 °C Solubility in water:1.07 mg/L @ 25 °C Vapor pressure:12.3 Pa @ 25 °C

Enox PMBP, di4methylbenzoylperoxide is a white paste in silicon oil which has C16H14O4 as chemical formula. This diacyl peroxide is mainly used for the crosslinking of silicone rubbers. Di(4methylbenzoyl)peroxide is also known as pToluoyl peroxide and 4methylbenzoyl peroxide Availability Europe Enox PMBP is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details CAS number:895-85-2 EC number:407-950-9 HS code:2916 39 00 Appearance:White paste Assay:49.00 – 52.00 % Active oxygen content:2.90 – 3.08 % Free chlorine:≤0..05 % Acidity as 4-methylbenzoic acid:≤0.50 % Volatile matter:≤1.50 % Bulk density:1.22 kg/m3 @ 20 ºC Melting point:101 325 Pa @ 134 ºC Partition coefficient (log Pow):4.70 @ 20 ºC SADT:80 ºC Solubility in water:0.043 mg/l (20 ºC) Vapor pressure:0.01 Pa @ 25 ºC

Enox TBPB (tertButyl Peroxybenzoate) is yellowish liquid which has C11H14O3 as chemical formula. It is a low volatility, high purity, aromatic peroxyester. which is effective as medium temperature initiator for polymerization of a broad spectrum of monomers, per example acrylics, ethylene and styrene. It is also used to cure (copolymerization) unsaturated polyester resins at elevated temperatures. Further it is used as catalyst for crosslinking synthetic rubbers like EPR, EPDM and NBR. re. Availability Europe Enox TBPB is on stock in our local warehouses. Our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:614-45-9 EC number:210-382-2 HS code:2916 39 90 Appearance:Light yellow transparent liquid Assay:≥98.50 % Active oxygen:≧ 8.12% Color:≤ 50 Hazen Water content:≤ 2.0 % Tert-butyl hydroperoxide:≤ 0.005% (In)organic hydrolysable Cl:≤ 0.005% Boiling point:282.40 °C ± 9.00 °C Density:± 1.059 g/cm3 @ 20 °C Flash point:109.70 °C ± 12.80 °C Melting point:9 °C – 11 °C Partition coefficient (log Pow):3.00 @ 25 °C SADT:60 °C Vapour pressure:0.00337 Torr = 0.45 Pa @ 25 °C

Enox TMCH90MO (1,1Di(tertbutylperoxy)3,3,5trimethylcyclohexane) is liquid substance which has C17H34O4 as chemical formula. It it used used for the (co)polymerization of styrene, acrylonitrile, acrylates and methacrylates in the temperature range between 90°C to 120 °C and for the polymerization of diethylene glycoldi(allycarbonate) based optical monomers. The use level of Enox TMCH90MO will depend on the particular cure parameters being used. 1,1Di(tertbutylperoxy)3,3,5trimethylcyclohexane is also known as TMCH and 1,1Bis(tertbutylperoxy)3,3,5trimethylcyclohexane. Availability Europe Provided Enox TMCH90MO is on stock in our local warehouses our lead time is about one week if delivered in 20 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:6731-36-8 EC number:229-782-3 HS code:2909 60 00 Appearance:Colorless to light yellowish liquid Assay:89 -91 % Active oxygen:9.31 – 9.52 % Color:≤ 60 Hazen TBHP:≤0.10 % Density:0.910 g/cm3 @ 20 °C Viscosity:35.5 mPa.s @ 20 °C Melting point:-29 °C Partition coefficient (log Pow):6.92 @ 20 °C SADT:60 °C Vapour pressure:2 Pa @ 20 °C

Enox YNE85MO, 2,5Dimethyl2,5di(tertbutylperoxy)hexyne3, is a yellow oily liquid which has C16H30O4 as chemical formula. This dialkyl peroxide is used as initiator for the (co)polymerization of styrene, besides it is used to crosslink polyethylene, natural rubbers and synthetic rubbers. 2,5Dimethyl2,5di(tertbutylperoxy)hexyne3 is also known as 2,5bis(tertbutylperoxy)2,5dimethylhex3yne and 2,5Di(tertbutylperoxy)2,5dimethyl3hexyne. Availability Europe Enox YNE85MO on stock in our local warehouses. Our lead time is about one week if delivered in 25 KG PE drums. South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1068-27-5 EC number:213-944-5 HS code:2909 60 00 Appearance:Light yellow transparent liquid Assay:84.0 – 86.0 % Active oxygen:9.38 – 9.61 % Color:≤ 100 Hazen Hydroperoxide as C16H30O4:≤2.0 % Bulk density:0.883 g/cm3 @ 20 ºC Flash point:69 ºC @ 1013 mBar Vapor pressure:0.014 Pa @ 20 ºC Partition coefficient (log Pow):6.71 @ 25 ºC

Rostabil TTDP (Tri iso tridecyl phosphite) is a clear liquid with has C39H81O3P as chemical formula. It is a trialkyl phosphite which is applied as secondary stabilizer in ABS, PET, PET fibers, lubricants, PVC, polycarbonate and polyurethanes. Tri iso tridecyl phosphite is also known as tris(11methyldodecyl) phosphite. Availability Europe Provided Rostabil TTDP is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:77745-66-5 EC number:278-758-9 HS code:2920 90 85 Acid Value:≤0.20 (mg KOH/g) Colour:≤100 Hazen Boiling point:520.01 °C Density:0.87 – 0,91 g/cm3 @ 20 ºC Flash point:154 ºC Melting point:<-20 ºC Partition coefficient (log Kow):16.73 @ 25 ºC Refractive index:1.459 – 1.465 Specific gravity:0.880 – 0900 g/m3 (25 ºC / 15 ºC) Solubility in water:Insoluble (< 0.1 mg/l) Vapour pressure:< 0.00000114 Pa @ 25 ºC

Fertige Farbmischungen in verschiedenen Granitfarbtönen als Zuschlagsstoff für mit Aluminiumhydroxid oder Calciumcarbonat gefüllte Harzsysteme für die Herstellung von "solid surface" künstlichen Steinen, Polyesterbeton (z.B. Granit).

Diese klassischen Tiegel sind in Klarglas, säuremattiert und Opalglas erhältlich. Umfangreiche Verschluss-Varianten sowie lieferbare Siegeleinlagen geben Ihrem Produkt die Individualität und Originalität. Höhe: 55,1 mm Gewicht: 140 g Inhalt: 100 ml Durchmesser: 65 mm Öffnung Ø: 49 mm Gewinde: 60

Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) is an offwhite powder with the following chemical formula C10H6O8.2C9H10N2 The curing mechanism between Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC 55. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC55 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 6,0 – 9,0 % of Vicura MC31 are recommended as good starting. Benzene1,2,4,5tetracarboxylic acid, compound with 4,5dihydro2phenyl1Himidazole (12) CAS number:54553-91-2 EC number:259-226-5 HS code:2933 2990 Appearance:White or yellow fine powder Assay:≥99 % Melting point:220 – 245 ºC Buk density:1.38 g/cm3 @ 20 ºC Melting point:±240 ºC at ± 1 atm Partition coefficient (log Pow):6.45 @ 25 ºC Solubility in water:6 g/l @ 20 ºC / pH 3.8 Vapor pressure (MGM):0 Pa @ 25 ºC

SilQon TMDSO ( tetramethyldisiloxane ), is a colorless clear liquid which has C4H14OSi2 as chemical formula. It is a is a hydrogen terminated siloxane dimer which hydride groups provide a reactive site. This allows reactions with a variety of substances which contain vinyl groups or with hydroxyl functional polysiloxanes in combination with heat or metal catalysts. Tetramethyldisiloxane is also known as 1,1,3,3Tetramethyl1,3dihydrodisiloxane. Availability Europe SilQon TMDSO is on stock in our local warehouse . Our lead time is about one week if delivered in 150 Kg plastic drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:3277-26-7 EC number:221-906-1 HS code:2931 90 00 Assay:≥ 99.00 % Cl content:≤ 30 ppm Boiling point:70.3 ºC @ 1013 hPa Bulk density:0.87 g/cm3 @ 20 ºC Flash point:-20 ºC @ 1.013 hPa Log Pow:4.50 Solubility in water:13 mg/l @ 20 ºC Vapor pressure:15000 Pa @ 20 ºC