Izdelki za kemično ločevanje (118)

Iniper 42S (Tertbutyl peroxy3,5,5trimethylhexanoate) is a clear liquid which has C13H26O3 as chemical formula. It is used as initiator in the production of acrylic polymers, polyethylene and styrene. Further it is applied as curing agent in the production of unsaturated polyester resins. Tertbutyl peroxy3,5,5trimethylhexanoate is also known as TBPIN and tertbutyl 3,5,5trimethylperoxyhexanoate. Availability Europe Provided Iniper 42S (TBPIN) is on stock in our local warehouses our lead time is about one week if delivered in 25 KG PE drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:13122-18-4 EC number:236-050-7 HS code:2915 90 70 Appearance:Clear liquid Assay:≥97.0 % Density:0.893 @ 20 °C Hydro peroxide:≤0.10 % Water Content:≤0.025 % Density:0.890 g/cm3 @ 20 °C Flash point:94 °C @ 1013.25 hPa Melting point:-69.15 °C Partition coefficient (log Pow):4.40 @ 25 °C SADT:60 °C Vapour pressure:0.03 mBar @ 30 °C Viscosity:5.0 mPa @ 20°C

Iniper 64 (Azobisisobutyronitrile) is an white solid which has C8H12N4 as chemical formula. Iniper 64 is used as initiator predominantly for bulk, solution, suspension and emulsion polymerisation of a wide variety of monomers. Polymers produced in this way are used for different applications such as fibres, sheets, coating resins flocculants etc. The polymerisation of the monomers used is initiated by the free cyanoisopopyl radicals which are formed upon thermal decomposition of Iniper 64. It does not form oxygenated residues as it is the case with peroxides and does not cause oxidative degradation of pigmented or dyed polymer compositions such as paints, coatings, fibres and sheets. Availability Europe Iniper 64 (AIBN) is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:78-67-1 EC number:201-132-3 HS code:2927 00 00 Appearance:White crystal powder / granules Assay:≥99.00 % Methanol insoluble:≤0.01 % Volatile matter:≤0.10 % Water content:≤0.50 % Density:1.098 kg/m3 @ 22.60 °C SADT:64 °C Partition coefficient (log Pow):2.87 @ 20 °C Solubility in water:Insoluble (< 0.10 mg/l) Vapor pressure:0.81 Pa @ 25 °C

Iniper AIVN SG2000 (Azobismethylbutyronitrile) is an white solid which has C10H16N4 as chemical formula.It finds its application as polymerzation initiator of amongst others acrylics and styrenes. Further it is also used in the production of foams to create nitrogen bubbles. Iniper 67 is significantly more soluble in organic solvents than Iniper 64 (AIBN) . Azobismethylbutyronitrile is also known as 2,2’Azobis(2methylbutyronitrile), 2,2′(Diazene1,2diyl)bis(2methylbutanenitrile) and AMBN. Availability Europe Iniper AIVN 2000 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:13472-08-7 EC number:236-740-8 HS code:2927 00 00 Appearance:White powder / granules Assay:≥98 % Insoluble in isopropanol matter:≤0.20 % Loss on drying:≤0.50 % Water content:≤0.50 % Density:1.130 kg/m3 SADT:45 °C Melting point:48 ~ 52 °C Partition coefficient (log Pow):2.07 @ 20 °C (pH ≥ 6.99 – ≤ 7.19) Solubility in water:392 ± 5 mg/L @ 20 °C Vapor pressure:0.006 Torr @ 25 °C / 0.78 Pa

SilQon OCTEO ( Octyltriethoxysilane ), is a colorless clear liquid which has C14H32O3Si as chemical formula, is used in polymer preparations, coatings, personal care and household products, tyre production and sealants. Octyltriethoxysilane is also known as octyltriethoxysilane and triethoxyoctylsilane. Availability Europe and United States Provided {{Product}} is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2943-75-1 EC number:220-941-2 HS code:2931 90 00 Assay:≥ 98.00 % Color (Pt-Co):≤ 30 Refractive index:1.4090 – 1.4190 Boiling point:259.60 ºC Bulk density:0.876 g/cm3 @ 25 ºC Flash point:45 ºC @ 1013 hPa Log Pow:5.6 @ 20 ºC Solubility in water:0.79 mg/l @ 20 ºC Vapor pressure:0.11 Pa @ 25 ºC

Iniper MAI (Dimethyl 2,2′azobis(2methylpropionate)) is an white solid which has C10H18N2O4 as chemical formula. Iniper MAI is used as polymerization in the production of polyols and polyester polyols, it is a nonnitrile azoinitiator which is soluble in a wide variety of organic solvents. This substance is also known as 2,2Azobisisobutyric acid dimethyl ester and Dimethyl 2,2′(diazene1,2diyl)bis(2methylpropanoate). Availability Europe Iniper MAI ( Dimethyl 2,2′azobis(2methylpropionate) is on stock in our local warehouses. Our lead time is about one week if delivered in 20KG carton boxes. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2589-57-3 EC number:219-976-6 HS code:2927 00 00 Appearance:Light yellow or dark-white crystal granules Assay:≥98.00 % Fe:≤ 500 ppm MMA (HPLC):≤0.80 % Water:≤1.00 % Density:1.060 kg/m3 SADT:35 °C Melting point:22 – 28 °C Partition coefficient (log Pow):1.34 @ 20 °C Solubility in water:Insoluble Vapor pressure:0.0244 mmHg @ 25 °C

Thanks to the specific reactivity of the 2aminoethylaminopropyl structure, using SilQon DAMO as an adhesion promoter in Glass – fiber reinforced or fillermodified plastics reduces the filler’s sedimentation tendency and improves dispersibility and numerous mechanical properties (e.g. flexural strength, tensile strength, modulus of elasticity) of the composites. The use of SilQon DAMO in these materials also results in a markedly improved resistance to water (vapor) and corrosion. Electrical properties, such as volume resistivity and the dielectric constant, are also positively influenced. Availability Europe SilQon Damo is on stock in our local warehouse. Our lead time is about one week if delivered in 190 Kg steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:1760-24-3 EC number:217-164-6 HS code:2931 90 00 Assay:≥ 97.0 % Refractive Index:1.4405 ~ 1.14450 Boiling point:240 ºC @ 101 325 Pa Density:1.0 g/cm3 (20 ºC) Flash point:120 ºC @ 101 325 Pa Melting point:< -97.8 ºC Log Pow:-0.820 Solubility in water:1 000 000 mg/L (20 ºC) Vapor pressure (MGM):0 Pa (25 ºC)

Pinacolone is a colorless clear liquid which has C6H12O as chemical formula. This substance is an unsymmetrical ketone and is used as intermediate in the production of pharmaceuticals and pesticides. Pinacolone is also known as 3,3dimethylbutanone and tertbutyl methyl ketone. Availability United States We have regular sales of this substance, this product can be stocked upon request. In this case our delivery time is about 1 week. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. We don’t supply this substance to EU customers. CAS number:75-97-8 EC number:200-920-4 HS code:2914 19 90 Appearance:Colorless clear liquid Assay:≥97.00 % Water:≤1.00 % Refractive index:1.3952 Boiling point:106.10 ºC @ 1.013 hPa Flash point:5 ºC Partition coefficient (log Pow):1.20 @ 20 ºC Solubility in water:19 g/l @ 25 ºC Vapour pressure:31.5 mm Hg @ 25 ºC

The curing mechanism between Vicura MC68 (Pyromellitic Acid Diphenyl Imidazoline Salt) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC68. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC68 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 8,0 – 10,0 % of Vicura MC68 are recommended as good starting points. Also available with added calcium carbonate (Vicura MC68L) Availability Europe Vicura MC68 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG carton boxes. CAS number:54553-90-1 EC number:259-224-2 HS code:2933 2990 90 Appearance:White or yellow fine powder Assay:≥99.00 % Melting range:220 – 230 °C Water content:≤0.50 % Boiling point:>201 ºC @ 1 atm Buk density:1.540 kg/m3 Melting point:>210 – < 235 ºC at 1 atm Partition coefficient (log Pow):1 @ 25 ºC Solubility in water:3 g/l @ 20 ºC / PH 2.9 Vapor pressure (MGM):0 kPa @ 25 ºC

SilQon OPCTS ( Octaphenylcyclotetrasiloxane ) is a white solid which has C48H40O4Si4 as chemical formula. It can be used for synthesizing pharmaceutical intermediates and organic silicone intermediates, especially for high temperature resistant phenyl silicone oil and other polymers. Octaphenylcyclotetrasiloxane is also known as phenyl D4. Availability United States Provided SilQon OPCTS is on stock in our local warehouse our lead time is about one week if delivered in 100 Kg drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. Not available in EU countries. CAS number:546-56-5 EC number:208-904-9 HS code:2931 90 00 Assay:≥ 98.00 % Boiling point:332 ºC Bulk density:1.185 g/cm3 @ 25 ºC Flash point:200 ºC Log Pow:5.09 Solubility in water:Insoluble in water Vapor pressure:7.23e-11 mmHg

A micronized grade of dicyandiamide containing 1.5%1.6% antiblocking agent to inhibit clumping and improve handling. It is used as curing agent for epoxy resins. Due to its high melting point Vicura DICY 100S does not melt during extrusion to produce a homogeneous mixture with the epoxy resin on a molecular scale. Therefore Vicura DICY 100S is supplied with low particle size assuring in this way acceptable homogeneity during the extrusion step, provided the premixing process is done properly. Outstanding features of epoxy powder coatings cured with Vicura DICY100S include excellent adhesion to metal, excellent chemical and solvent resistance, very high impact, abrasion and scratchy resistance, and dielectric properties that make them suitable for many electrical applications. Availability Europe and United States Provided Vicuta DICY 100S is on stock in our local warehouses our lead time is about one week if delivered in 20 KG carton boxes. CAS number:461-58-5 EC number:207-312-8 HS code:2926 20 Appearance:Fine white powder Assay:≥97.30 % Particle size:≥98.00 % <10 μm Moisture:≤0.50 % Anti-caking agent:≥1.60 % Bulk density:1.404 g/cm3 Melting point:≥210 – ≦ 212 ºC Partition coefficient (log Pow):1.00 @ 20 ºC ± 0.50 ºC Solubility in water:4.13 g/100 gram water @ 25 ºC

SilQon OMCTS ( Octamethylcyclotetrasiloxane ) is a clear liquid which has C8H24O4Si4 as chemical formula. It is a cyclic organic silicon substance which can be used as monomer in the production of silicone polymers such as rubber, resins and greases. Octamethylcyclotetrasiloxane is also known as D4. Availability Europe and United States Provided SilQon OMCTS is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:556-67-2 EC number:209-136-7 HS code:2931 90 00 Assay:≥ 99.00 % Refractive index:1.3968 @ 25ºC Boiling point:175 ºC @ 101 325 Pa Bulk density:0.95 g/cm3 @ 25 ºC Flash point:51 ºC @ 101 325 Pa Log Pow:6.49 @ 25.1 ºC Solubility in water:0.056 mg/L @ 25 ºC Vapor pressure:132 Pa @ 25 ºC

RuCat 402 (Ruthenium on Alumina Catalyst) is a black powder which has Ru/AIO2O3 as chemical formula. This Ruthenium, a rare earth metal, supported catalyst has several applications including fuel cell technology, organic chemistry and hydrogenation of aromatic aldehydes. Availability Europe and United States RuCat 402 is available with short lead times. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:7440-18-8 EC number:231-127-1 HS code:3822 00 00 Appearance:Black powder Ruthenium content:5.0 % (± 0.02) Chloride content:≤ 0.05% Water content:≤ 0.50% Bulk density:0.70 – 1.0 g/ml Pore volume:≥ 0.30 ml/g Specific surface:≥ 300 m2/g

Iniper 117 (Tert butyl peroxy 2ethylhexyl monocarbonate) is a clear liquid which has C13H26O4 as chemical formula. It is mainly used as radical initiator to induce polymerization for the production of EPS (expanded polystyrene), ethylene, acrylates and methacrylates. Further it is used for the crosslinking of natural and synthetic rubbers as well as thermoplastic elastomers. Lastly it is used for the curing of unsaturated polyester resins at elevated temperatures. Availability Europe Iniper 117 (TBEHC) is on stock in our local warehouses. Our lead time is about one week if delivered in 10 KG, 16 KG or 25 KG PE drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:34443-12-4 EC number:252-029-5 HS code:2920 90 10 Appearance:Colorless liquid Assay:≥96.0 % Active oxygen:≥6.23 % Chloride:<0.10 % HPO:<0.20 % Density:0.972 g/cm3 @ 20 °C Flash point:100 °C, ± 1 °C @ 101.3 kPa Melting point:-90 °C, ±25 °C Partition coefficient (log Pow):5.55 SADT:65 °C Vapour pressure:0.57 Pa @ 25 °C

Silqon HMDS (Hexamethyldisilazane) is a strong and versatile liquid silylation agent which has C6H19NSI2 as chemical formula. Unlike chlorosilanes no base is needed as a hydrochloric acceptor. SilQon HMDS (Hexamethyldisilazane) is also known as Bis(trimethylsilyl)amine, 1,1,1TrimethylN(trimethylsilyl)silanamine or HDMZ. Availability Europe SilQon HMDS is on stock in our local warehouse. Our lead time is about one week if delivered in 150 Kg drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:999-97-3 EC number:213-668-5 HS code:2931 90 00 Assay:≥ 99.0 % Hexamethyldisiloxane:≤1.0 % Boiling point:125 ºC @ 1013 hPa Density:0.77 g/cm3 @ 20°C Flash point:11.4 °C @ 1013 hPa Melting point:-76.2 °C at 1013 hPa Log Pow:1.19 at 20°C Vapor pressure (MGM):2400 Pa at 25°C

Zum Einbau in lufttechnische Geräte und Anlagen aller Art sowie in Lackier- und Farbspritzanlagen. Taschenfilter Synthetik G 3–F 9 geprüft nach DIN 24185 (EN 779) - Prüfung bei 4,8 m2 freier Filterfläche der Güteklasse G3–F5 - Prüfung bei 6,0 m2 freier Filterfläche der Güteklasse F6 - F9 Liefergrößen Standardgröße (mm) 592 x 592 592 x 490 490 x 592 592 x 287 287 x 592 287 x 287 Taschentiefe (mm) 150/200/300/360/500/535/600/635 Sondergrößen in jeder Abmessung lieferbar Lackverträglich/silikonfrei Materialbeschreibung • Filtermedien aus Synthetik (100% Poyester) • Filterrahmen aus Metall auf Wunsch in veraschbarem Kunststoffrahmen lieferbar • Feuchtigkeitsbeständig bis ca. 100% Luftfeuchtigkeit • Temperaturbeständig bis ca. 80ºC

The use of Silqon Glymo (3glycidoxypropyltrimethoxysilane) as a coupling agent in mineralfilled plastics improves filler dispensability, reduces its sedimentation tendency and greatly lowers the resin’s viscosity. In addition it leads to higher filler loading and a marked increase in water (vapor) resistance as well as resistance to acids and bases. As a component of adhesives and sealants. Silqon A187 improves both adhesion to the substrate and mechanical properties such as flexural strength, tensile strength and modulus of elasticity. Availability Europe SilQon Glymo is on stock in our local warehouse. Our lead time is about one week if delivered in 190 Kg steel drums. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2530-83-8 EC number:219-784-2 HS code:2931 90 00 Assay:≥ 98.00 % Colour (Pt-Co):≤30 Refractive Index:1.4265-1.4275 Boiling point:262 ºC @ 1013 hPa Bulk density:1.07 g/cm3 (20 ºC) Flash point:110 ºC @ 101.3 kPa Melting point:< -70 ºC Log Pow:-2.60 @ 25 ºC Solubility in water:36.52 g/l (20 ºC / pH 7) Vapor pressure (MGM):0.003 hPa (20 ºC)

SilQon Memo (3trimethoxysilylpropyl methacrylate), is a colorless clear liquid which has C10H20O5Si as chemical formula, is used as adhesion promoter at (in)organic interfaces or as surface modifier or as crosslinker of polymers. It is used as a coupling agent to improve the physical and electrical properties of glassreinforced and mineralfilled thermosetting resins if exposed to heat and/or moisture. It is typically employed as a blend additive in resin systems that cure via a free radical mechanism (e.g. polyester, acrylic) and in filled or reinforced thermoplastic polymers, including polyolefins and polyurethanes. It is also used to functionalize resins via radical initiated processes – copolymerization or grafting – and to modify surfaces. 3trimethoxysilylpropyl methacrylate is also known as Triethoxyoctylsilane and NOctyltriethoxysilane. Availability Europe Provided SilQon Memo is on stock in our local CAS number:2530-85-0 EC number:219-785-8 HS code:2931 90 00 Assay:≥ 98.00 % Specific Gravity:1.040 ~1.050 @ 20ºC g/cm3 Refractive Index:1.4245-1.4340 Boiling point:253 ºC @ 101 325 Pa Bulk density:1.04 g/cm3 @ 20 ºC Flash point:100 – 110 ºC @ 1013 hPa Log Pow:2.1 @ 21 ºC Solubility in water:2.200 mg/l @ 20 ºC Vapor pressure:2.30 Pa @ 25 ºC

Vicura MC2844 (1otolylbiguanide) is an offwhite powder which has C9H13N5 as chemical formula. This substance finds its application in powder coatings and is also known as substituted dicyandiamide or modified dicyandiamide. nter content here. Availability Europe Vicura MC2844 is on stock in our local warehouses. Our leadtime is about one week if delivered in 25 KG carton boxes. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:93-69-6 EC number:202-268-6 HS code:2925 290090 Appearance:Off- white powder Assay:≥98.00 % Melting point:≥139 ºC Volatiles:≤ 2% Boiling point:365.18 ºC @ 101.325 kPa Buk density:1.139 kg/m3 @ 20 ºC Melting point:>139 – <143 ºC Partition coefficient (log Pow):0.7145 @ 25 ºC Solubility in water:2.75 g/l @ 25 ºC / pH ± 12.03 Vapor pressure (MGM):0 Pa @ 25 ºC

Schalensiegelmaschine für die teilautomatische Heißsiegelung von Blisterboxen für Medizinprodukte (Medizinische Verpackungen) Durch unsere durchgehend flache Siegelplatte können unterschiedliche Blisterformate versiegelt werden. Der Formatwechsel kann in wenigen Handgriffen und ohne Werkzeug erfolgen. Selbstverständlich erhalten Sie von uns die für Ihr Produkt passenden Formateinsätze. Auf Wunsch liefern wir Ihnen auch die passenden Blisterboxen und Siegelfolien. Modell: TS400-M Funktion: Heißsiegelung von Blisterboxen Hauptmaterial: Edelstahl 304, Aluminiumlegierung Dimensionen: 500 mm x 550 mm x 570 mm Gewicht: ca. 150 kg (ohne Form) Stromversorgung: 220 V 50 / 60 Hz einphasig 2,4 KW Druckluftversorgung: Druck 5 bar - 8 bar, ca. 18 l/min Siegelgröße: 300 mm x 400 mm Verpackungstiefe: Tiefste 100 mm Produktionsgeschwindigkeit: Bis zu 12 Zyklen/min, abhängig von der Qualifikation des Bedieners Heißsiegeldruck: 0,1 - 0,6 Mpa einstellbar Preis: auf Anfrage Funktion:Heißsiegelung von Blisterboxen Hauptmaterial:Edelstahl 304, Aluminiumlegierung Maße:500 mm x 550 mm x 570 mm Gewicht:ca. 150 kg (ohne Form) Stromversorgung:220 V 50 / 60 Hz einphasig 2,4 kW Druckluftversorgung:Druck 5 bar - 8 bar, ca. 18 L/min Siegelgröße:300 mm x 400 mm Verpackungstiefe:max. 100 mm Produktionsgeschwindigkeit: Bis zu 12 Zyklen/min, abhängig von der Qualifikation des Bedieners Heißsiegeldruck:0,1 - 0,6 Mpa einstellbar

Iniper DCP (dicumyl peroxide), is a white crystal which has C18H22O2 as chemical formula. This dialkyl peroxide is used for the (co)polymerization of styrene, besides it is used to crosslink polymers and elastomers. Further it finds its application as flame retardant synergist in EPS. Dicumyl Peroxide is also known as Diisopropylbenzene peroxide, Bis(α,αdimethylbenzyl) peroxide and Dicumene hydroperoxide. Availability Europe Iniper DCP is on stock in our local warehouses. Our lead ime is about one week if delivered in 20 KG carton boxes. United States, Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:80-43-3 EC number:201-279-3 HS code:2909 60 00 Appearance:White crystal Assay:≥ 99.00 % Active Oxygen:≥ 5.86 Flash point:130.7 ºC @ 101 325 Pa Partition coefficient (log Pow):5.6 @ 25 ºC SADT:750 °C Vapour pressure:0.001 Pa @ 25 ºC

Polarad DTHFP (ditetrahydrofurylpropane) is a clear liquid which has C11H20O2 as chemical formula. DTHFP is also known as 2,2di(tetrahydrofuryl)propane and 2,2′di(tetrahydrofuryl)propane. Availability Europe Polarad DTHFP is on stock in our local warehouse. Our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:89686-69-1 EC number:700-263-8 HS code:2932 1900 41 Appearance:Clear liquid Assay:≥ 98.00 % Moisture:≤ 1.0 % Boiling point:244 °C Flash point:105 °C @ 101 325 Pa Partition coefficient (log Pow):2.7 @ 22 ºC (pH 7) Solubility in water:7.31 g/l (19.7 ºC) Vapour pressure:3.88 Pa @ 20 °C

Iniper 44 (AIBI / 2,2’Azobis(2(2imidazolin2yl) propane)dihydrochloride) is a white crystal powder which has C12H24C12N6 as chemical formula. It is an watersoluble azoinitiator which is used in flocculants, super absorbent polymers and finishing agents for textile and wool. Iniper 44 (AIBI) is also known as 1,2Bis(2(4,5dihydro1Himidazol2yl)propan2yl)diazene dihydrochloride. Availability Europe Iniper 44 (2,2’Azobis(2(2imidazolin2yl) propane)dihydrochloride) is limited on stock. Our lead time is about one week if delivered in 20 KG carton boxes. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:27776-21-2 EC number:248-655-3 HS code:2927 00 00 Appearance:White crystal powder Assay:≥98.0 % Volatility:≤ 1.0 % Relative density:1.303 g/ml @ 20 °C SADT:140 °C Partition coefficient (log Pow):-3.5 @ 20 °C Solubility in water:200 g/L @ 20 °C Vapor pressure:0.001 Pa @ 50 °C

Iniper 52 (ABVN / 2,2′Azobis (2,4 dimethylvaleronitryle) is an odorless white solid which has C14H24N4 as chemical formula. This FRS (free radical source) is used as polymerization initiator. Iniper 52 is used for low temperature polymerization and is soluble in a variety of organic solvents. 2,2′Azobis (2,4 dimethylvaleronitrile is also known as ADVN, 2(2Cyano4methylpentan2yl)diazenyl2,4dimethylpentanenitrile and 2(2Cyano4methylpentan2yl)diazenyl2,4dimethylpentanenitrile. Availability Europe Iniper 52 (ABVN) is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG carton boxes. Canada, United States, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:4419-11-8 EC number:224-583-8 HS code:2927 00 00 Appearance:White crystals Assay:≥98.00 % Cl:≤0.02 % Color APHA:≤ 15 Acetone insoluble:≤0.02 % Water content:≤0.50% Density:930 kg/m3 SADT:25 °C Melting point:45-70 °C Partition coefficient (log Pow):4.86 @ 20 °C Vapor pressure:0.000164 mmHg @ 25°C

Vicura MC31 (2phenyl2imidazoline) is an offwhite powder which has C9H10N2 as chemical formula. It can be used as a crosslinker for highly reactive epoxy powder coatings, accelerator for dicyandiamide, epoxy/polyester hybrids and epoxy phenolic powder coatings. 2phenyl2imidazoline is also known as 2Phenyl4,5dihydro1Himidazole and 4,5Dihydro2phenyl1Himidazole. Availability Europe and United States Provided Vicura MC31 is on stock in our local warehouses our lead time is about one week if delivered in 25 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:936-49-2 EC number:213-313-4 HS code:2933 2990 90 Appearance:Off- white powder Assay:≥98.00 % Melting point:98 – 102 °C Buk density:151 ºC @ 1 atm Melting point:>98 – < 102 ºC at 1 atm Partition coefficient (log Pow):2.45 @ 25 ºC Solubility in water:11 g/l @ 20 ºC / PH 11.3 Vapor pressure (MGM):0.001 hPa @ 20 ºC

Système Ultra Clear Compact avec réservoir intégré Le tout en un exclusif (osmose, déionisation et réservoir intégré)

Viobrite DMSX is a stilbene derivative type of optical brightener which has C40H38N12Na2O8S2 as chemical formula. This fluorescent whitener is mainly used in laundry detergents. Other applications include textiles and paper. This product is also known as FWA1, fluorescent whitener 71. DMSX is not stable towards bleaching processes and has a high affinity to cellulosic fibers. It can be used in combination with Viobrite CBS (Distyrylbiphenylsulfonate ) to achieve the optimal performance. Availability Europe and United States Provided Viobrite DMSX is on stock in our local warehouses our lead time is about one week if delivered in 200 KG steel drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:16090-02-1 EC number:240-245-2 HS code:3204 20 00 E-value:≥ 435 Iron content:≤ 35 ppm Moisture:≤5.0% Triazine AAH:≤0.05 % Triazines:≤0.65 % Autoignition:303 ºC Bulk density:1.540 kg/m3 (22 ºC) Melting point:>300 ºC Partition coefficient (log Pow):-2.09 Solubility in water:1.9 g/l @ 20 ºC / pH 10.5 Vapour pressure:<0.0000000000000001 @ 20 ºC

Chemisch-technische Sprays in Profi-Qualitä,: z. B. Kleber, Klebstoffentferner, Schmier- und Korrosionsschutz, Schmirmittel, Reiniger, Rostentferner, Korrosionsschutz und Lecksuch-Spray.

Iniper 50 (2,2′Azobis(2methylpropionamidine)dihydrochloride) is a white granule which has C8H20Cl2N6 as chemical formula. It is an watersoluble azoinitiator which is used in the production of coagulants and superabsorbent polymers. Iniper 50 (AIBA) is also known as 2,2′(Diazene1,2diyl)bis(2methylpropanimidamide) dihydrochloride, 2,2′Azobis(2amidinopropane) dihydrochloride and alpha,alpha’Azodiisobutyramidine dihydrochloride. Availability Europe Iniper 50 (2,2′Azobis(2methylpropionamidine)dihydrochloride) is limited on stock. Our lead time is about one week if delivered in 20 KG carton boxes. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details. CAS number:2997-92-4 EC number:221-70-0 HS code:2927 00 00 Appearance:White granules Assay:≥98.0 % Volatility:≤ 1.0 % Relative density:1.214 g/ml @ 20 °C SADT:110 °C Partition coefficient (log Pow):0.3 @ 25 °C Solubility in water:176 g/L @ 20 °C Vapor pressure:0 Pa @ 20 °C