Izdelki za lončnica iz gline (30)

Kaolin M20 - 40mµ-Mahlkaolin

REFERENCE : ARTP3200TCR25 ALPHA 3200 coloré PLATRE 3200 T.CUITE ROUGE 25kg -> Descritpion PLATRE DE MOULAGE COLORE POUR L'INDUSTRIE STATUAIRE -> Domaine d'application Produit teinté, spécialement conçu pour l'industrie statuaire : - Moulages durs, - Maquettes, - Statuettes, et ornement. -> Caractéristique Unité de vente : bidon de 25kg Minimum de vente : un bidon

Suitable for universally usable refurbishment wax for mending surface damages and small defects in varnished, oiled or glazed wood surfaces indoors, such as doors and furniture, wall panels and wood parts.

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

ADLER is the specialist when it comes to wood preservation and wood paints and varnishes. Work at the ADLER factory on the development of water-thinnable wood finish products for wooden constructions had already commenced 20 years ago. Over the years these have been continuously improved. At the same time the raw materials were further developed and the latest product family was created: The Lignovit range. Using these water-thinnable, thin-film wood finishes, professionals could give the ADLER value addition to their wooden construction. Rely on material of the future wood and give your customer the beauty and quality of this natural raw material. Based on the motto "Grow together", ADLER now provides its know-how, well-developed and seasoned concepts and experience to master carpenters and industrial producers. With the help of the ADLER wood finishes of the Lignovit family, you have, in any case, a system available that does justice to your high demands on quality, beauty and...

AOPB est autonome pour la fabrication des moules : - moules classiques, - moules 3 plaques, - moules à dévissage, - moules à canaux chauds, - moules de surmoulage d'inserts, - moules à versions.

Mezcla de aditivos, condimentos y especias, para la elaboración del producto cárnico no tratado por el calor denominado “Salchichón” o “Chorizo blanco” de calidad “Extra”, elaborado con técnicas de curación lenta (temperatura de 6 a 12ºC y HR inicial del 78 al 86%). Formato: bolsa 4kg

👉👉 MINERAL DE HIERRO 62% 👉 País de origen: Chile 🇨🇱 ✅ Permisos Gubernamentales y Titulo Minero al día ✅ 👉 Capacidad de producción: 200.000 t/m mensuales 🤝🏻 Negociación directa con la mina 🤝🏻 👉 Información detallada en la oferta adjunta ¿Interesado❓ Hablemos ❗

* It is applied in 2 cm thickness. * 1 package of product is 20 kg. 1.6-1.8 kg of product is required for 1 m2 area. * You can easily reach an application area of ​​12 m2 by using a 20 kg Multiyap and a 6 mm notched trowel. * By providing waterproofing, even if the joint fillings between the tiles deteriorate, water does not leak to the lower floor. * There is no need to make water isolation in bathroom applications. * Since it is a hydrophobic product, a single product provides both water isolation and a strong tile ceramic application with superior performance. * It is quite light. It reduces labor and transportation costs. * It is flexible and the working time is extended. * It has strong adhesion feature.

Due to high surface hardness and low surface abrasiveness, it is characterized by good slip and good resistance to friction, does not dissolve and does not swell in all used solvents, in fuels and mineral oils. It is most often used for the production of precision machine parts, such as gears, worm gears, bushes, etc

Davita Block is prepared to meet the animals mineral and vitamin needs. İt is used to minimize complaints such as clay, wool, paper eating and wall licking due to deficiency of mineral and vitaminA,D3,E substance in animals. İt helps to increase the fertility and makes the immune system stronger. Prevents from anorexia and bad wool quality caused by salt deficiency. Usage: Keep near to the animals feeder and drinkers at a distance that they can reach easy or can hang from the middle hole so can help them to lick easily.

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

Gilsonite Naturasphalt ist das perfekte Additiv für hochbelastete Verkehrsflächen

Solvent

Nous fournissons tout type de ciment colle fabriqué selon la norme EN 12004 : du Cilement colle basique (C1) à ciment colle haute performance (C2TES2)

Bricompatto 003 - Bricompatto

Premixed adhesive based on cement class C2 TE S1 for the indoor and outdoor installation of floor and wall coverings, with high workability, extended open time and increased adhesion and good capacity to absorb the substrate’s deformation, zero vertical slip. Specific for floor and wall coverings also non-absorbent, natural stones, overlapping non-absorbent materials, large formats on large surfaces screeds with insertion of underfloor heating, for application of porcelain stoneware at low thickness.

En tant que fabricant de savon, FJCAMPOS mise sur la qualité de ses produits, car ils sont fabriqués avec des ingrédients 100% végétaux, sont respectueux des animaux et, en plus d'être produits avec élégance, sont emballés à la main. Actuellement, la société propose environ 29 savons de marque maison. Le lait d'ânesse est riche en protéines de lait, en vitamines A et E, en calcium et en minéraux, possède des propriétés réparatrices et régénérantes, contribuant à l'élasticité et à la vitalité de la peau, ce qui se traduit par une peau plus jeune et plus belle. Le lait d'ânesse contient des protéines qui, en plus d'hydrater, aident à former un film continu à la surface de la peau, ce qui rend la peau lisse. La coenzyme Q10 est un puissant antioxydant qui protège la peau du vieillissement et aide à éliminer les imperfections et les rides.

Cire dentaire dure à inlay Cire dure pour tous types de restauration, spécialement recommandée pour la technique de sculpture des couronnes primaires dans les travaux combinés comme le recouvrement de prothèse? Avantages Modelage facile après la prise Ne colle ni au modèle ni aux instruments Faible rétraction Entièrement calcinable sans résidu Maquette précise Coulée lisse Liste

Dollmar distribuisce zeoliti, prodotti che trovano applicazione come deumidificanti nella produzione di schiume poliuretaniche rigide e flessibili, elastomeri, prodotti vernicianti, adesivi e sigillanti.

COMPOSITION ET ASPECT Plâtre, carbonate de calcium, résine et divers adjuvants. La pâte est de couleur blanche. SUPPORT ADMIS Carreaux de plâtre hydrofugés ou non, plâtre, béton, agglos, béton cellulaire. REVÊTEMENTS Tous types de produits à l’exception des produits à base de ciment. DOCUMENTS À CONSULTER • DTU 25.31 • NF EN 12860 CARACTÉRISTIQUES TECHNIQUES • Temps de prise : 2h30 • Réaction au feu A1 CONDITIONNEMENTS Sacs de 5 et 25 kg sur palette houssée. STOCKAGE 9 mois en emballage d’origine non entamé à l’abri de l’humidité. PRÉPARATION DES SUPPORTS Les carreaux de plâtre doivent être secs et dépoussiérés. TAUX DE GÂCHAGE Environ 13 à 14 l. d’eau par sac de 25 kg. APPLICATION La pose du premier rang se fait en encollant le bord et le fond des mortaises venant sur le sol et en partie verticale. Les joints entre carreaux ne doivent pas dépasser 3 mm d’épaisseur. Le deuxième rang se fera de la même manière, à joints décalés, avant que la colle ait commencée...

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm. thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:25.0000 Artikelnummer:9005249005862

DESCRIPTION Façacryl est une peinture de dispersion acrylique de haute qualité spécialement conçue pour les façades. Très bonne adhérence sur toutes les surfaces minérales et diverses. Bon pouvoir couvrant, ne jaunit pas, respirant, parfaitement lavable et bon tendu. Rendement (indicatif) : 6-9 m²/L, selon le support Valeurs limites de l’UE pour ce produit (COV) : Cat. A/a : 30 g/L (2010). Ce produit contient moins de 30 g/L de produits COV.

Mezcla de aditivos, condimentos y especias, de uso charcutero, para la elaboración del producto cárnico tratado por el calor denominado “Morcilla”. Formato: bolsa 5kg

Grout CR Composite , castable, anti-washout, controlled shrinkage cement mortar, superfluid consistency, based on high-resistance cements, superpozzolanic fillers (MICROSIL 90), polymeric modifiers, shrinkage resistant agents, specific additives, calcium silicate mineral fibres, selected silica aggregates. - Based on of thickened silica fume - three-dimensionally reinforced fibre with mineral and synthetic fibres - Provides high adherence and adhesion - dimensionally stable (shrinkage-compensated) - Provides high stability-physical chemical and resistance to chlorides and sulphates - suitable for underwater castings: it is anti-washout - high strength in terms of hydrostatic positive and negative thrust. Repair and protective coatings of hydraulic structures, marine and underwater structures, and articles in critical situations: harsh chemical-physical, leaching water, marine atmosphere, etc. Filling of formwork for the containment of cast immersed in sea water. In case of underwater application, the installation operations must be carried out within 8-10 hours of cleaning and "fouling" (accumulation and deposits of organic and inorganic particles on product surfaces) removal. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour 2/3 of total mixture water in the cement mixer, gradually add the product and the remaining water, until a homogeneous mixture of the required consistency is obtained. For sizable filling thicknesses, greater than 60 mm, Ghiaietto 6.10 (inert washed is selected with a particle size of from 6-10 mm) can be added in a percentage ranging from 20% to 40 %, on the basis of practical requirements. In some particularly demanding cases in terms of the resistance to the "dry-wet" cycle (for example, for the action of the tides) or for chemical attacks particularly strong, it would be advisable to add, in addition to the gravel, even thickened silica fume(MICROSIL 90), and in a variable amount depending on the thickness and construction-related need, to further improve the waterproofing and the mechanical strength of the product. In these cases, please contact our Technical Service. In the case of casts in water, make sure of perfect product hardening before removal of the formwork. Approximately 20,50 kg/m² of Grout CR for every centimetre of thickness to be implemented (approximately 2050 kg per cubic metre). Packaging: 25 kg bag UM: €/kg

REFERENCE : RESMPP16095 (ex PP1609)36kg/m2. RESIFOAM BAYMER AL759 5kg...kg MOUSSE POLYURETHANE RESIFOAM. Mousse polyuréthane expansive rigide approprié pour le remplissage d'élements par coulée. Applications:isolation industrielle,remplissage, reserves de flotabilité etc... MELANGE: 100parts RESIFOAM + 100parts DESMODUR(en volume)

Belongs to the most popular thermoplastics with constructional application. It owes its popularity to special properties, such as high mechanical strength, excellent sliding properties, high impact resistance, good chemical resistance, damping ability and machinability (turning, milling, cutting)

Wasserbasierte, farblose Holzschutzimprägnierung mit bioziden Wirkstoffen speziell für Nadelholz wie Fichte, Tanne, Kiefer und Lärche im Außenbereich. Enthält Lichtschutzmittel zur Absorption der UV-Strahlung und Stabilisierung des Holzbestandteiles Lignin. Gleichmäßige Saugwirkung besonders auf Nadelholz. Lignovit Protect-Primo Farblos Besondere Eigenschaften Die verwendeten Wirkstoffe bieten den laut ÖNORM B 3802-2 bzw. DIN 68800-3 geforderten Schutz vor Bläue (Prüfung nach EN 152-1), holzzerstörenden Pilzen (Prüfung nach EN 113) und wirken vorbeugend gegen Insektenbefall (Prüfung nach EN 46). Auftragsmenge bei Normprüfung 100 - 120 g/m². Wirkstoffe (B, P, Iv) 9 g / kg (0,9 %) IPBC (Iodpropinylbutylcarbamat) 2,5 g / kg (0,25 %) Tebuconazol 0,5 g / kg ( 0,05%) Polymeres Betain 1 g / kg (0,1 %) Permethrin Auftragsart Streichen Tauchen, Fluten Vacumat

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.

Anwendung: Verfugen von Geraden, Schamottefliesen in Kachelöfen, Kaminen, Öfen, Gartengrills. Die empfohlene Fugenstärke beträgt 2-3 mm thermischer Widerstand:1300 °C Verpackung:5 kg Gewicht (kg]:1,0000 Artikelnummer:9005249006425