Izdelki za nacl (30)

Im Hals einer Düse wird Schallgeschwindigkeit erreicht, wenn der absolute Eingangsdruck vor der Düse mindestens doppelt so groß ist wie der Ausgangsdruck.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:901

EGE Füllstandswächter mit optischem Messprinzip wurden speziell entwickelt für die Erfassung von Flüssigkeiten mit niedrigem DK-Wert. Dazu zählen u. a. Schmieröle oder Kohlenwasserstoffe. Die optischen Fülstandsensoren von EGE erfassen an ihrer transparenten Spitze aus Polyethersulfon (PES) oder Glas die Änderung des Brechungsindexes bei Mediumkontakt. Die Sensoren mit mit Edelstahlgehäuse und Glasspitze eignen sich zudem für die Erfasssung von aggressiven Medien wie z. B. Lösungsmittel. Sie sind auch erhältlich mit Ex-Zertifizierungen nach ATEX und IECEx.

The BS78 is a high accuracy exposed linera encoder with an interferometric signal generation in transmitted light design. The scale has a graduation period of 0.55µm. The LASERSCALE operating principle generates a sinusoidal measuring signal with a signal period of 138nm. This has an extremely high signal quality with a very low noise component. This allows resolutions of up to 2.1 pm to be generated. Due to the extremely low interpolation error, the BS78 is perfectly suited for ultra precision machining, measurement and calibration applications. measuring range:10mm - 420mm Accuarcy:+/-0,03µm - +/-0,65µm depends on measuring lengths Max. resolution:2,1pm with BD700 Grating pitch:0,55µm Signal pitch:138nm Output signal:1Vpp, TTL, BISS-C, USB, 40bit binary Reference mark:1, selectable

Luftbefeuchter Brune B 120, Luftbefeuchter nach dem Verdunstprinzip für Wohnräume, Büro oder Humidorschränke. Luftbefeuchter B 120: kompaktes Luftbefeuchtungsgerät für den Wohnbereich. Der Luftbefeuchter B 120 bietet eine wirkungsvolle und zugleich komfortable Lösung, um die Luftfeuchtigkeit in Wohnräumen und Büroräumen optimal zu erhöhen. Dabei überzeugt das Gerät sowohl durch seine Energieeffizienz als auch durch seinen ruhigen Betrieb. Vor allem in der kalten Jahreszeit, wenn trockene Heizungsluft die Atemwege austrocknet, ermöglicht der Luftbefeuchter B 120 ein gesundes und frisches Raumklima. Aber nicht nur die Gesundheit, sondern auch Einrichtungsgegenstände und andere wertvolle Güter werden durch eine optimale Luftfeuchtigkeit vor Schäden geschützt. Gewicht (leer):ca. 3,6 kg Maße (B x H x T):46,6x29,1x27,0 cm Netzanschluss:230 V/50 Hz

La pompe à solvent Mini est une pompe à main pour solvants d'une qualité exceptionnelle parfaitement adaptée aux flacons, bidons et autres petits récipients d'env. 10 litres au max. Pour le transvasement et le dosage fiables de solvants et liquides facilement inflammables. Principe simple - Effet important La pompe à main fonctionne selon le principe de la surpression. La balle de pompe permet d'obtenir une surpression à l'intérieur du récipient, poussant le liquide vers l'extérieur. Cette manière de procéder permet d'éviter tout contact avec le liquide à transvaser, hormis le flexible, tube de refoulement et bec. Une vanne spéciale empêche la montée en pression excédentaire (due par ex. au soleil) et protège ainsi la pompe à solvant. Matériaux de qualité Toutes les pièces de cette pompe à main en contact avec le fluide à transvaser sont en PTFE et inox (1.4301, 1.4404), excellents matériaux inertes qui se distinguent par leur excellente résistance aux produits chimiques. Capacité de convoyage:1,8 l/min Raccord fileté:GL 45

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:520

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:455

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:940

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:625

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:733

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:486

Les détecteurs de niveau EGE avec principe de mesure optique ont été spécialement conçus pour la détection de liquides à faible Epsilon. Il s'agit notamment des huiles de lubrification ou des hydrocarbures. Les capteurs de niveau optiques EGE détectent la variation de l'indice de réfraction au contact du fluide sur leur pointe transparente en polyéthersulfone (PES) ou en verre. Les capteurs avec boîtier en acier inoxydable et pointe en verre sont également adaptés à la détection de fluides agressifs tels que les solvants. Ils sont également disponibles avec la certification Ex selon ATEX et IECEx.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:428

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:795

EGE Sensoren mit dem Messprinzip der geführten Mikrowelle zur genauen Füllstandsmessung werden für verschiedenste Flüssigkeiten eingesetzt. Dazu werden Mikrowellen im Messstab geführt und bei Medienberührung reflektiert. Der Sensor bestimmt entsprechend der Laufzeit des Signals die Füllhöhe. Ein Abgleich auf verschiedene Medien ist nicht notwendig. Die Sensoren bieten die exakte Bestimmung der Füllstandshöhe in Kunststoff- oder Metallbehältern mit einer hohen Messgenauigkeit- auch unter schwierigen Bedingungen. Die Geräte verfügen über ein gut ablesbares Display und stellen Schaltsignale, Analogausgang sowie Datenübertragung per IO-Link zur Verfügung.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:487

The BH25 is a high resolution exposed linear encoder with interferometric measurement signal generation. The BH25 scale has a graduation period of 1µm. The interferometric laser scale principle generates a sinusoidal measurement signal with a signal period of 250nm in the read head. The BH25 is characterized by its small size and high signal quality. It is suitable for resolutions of up to 3.8pm. Due to the reflective scanning and the small design it is perfectly suited for high accuracy X/Y stages with linear motor drive as well as for measurement applications Measuring range:30 mm - 1400mm Accuarcy:+/-0,5µm - +/-3µm depends on measuring lengths Max. resolution:3,8pm with BD700 Reference mark:1 Grating pitch:1µm Signal pitch :250nm Output signals:1Vpp, TTL, BISS-C, USB, 40bit binary

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:624

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:715

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines measuring range:12mm Accuracy:1µm(p-p) / 1,5µm(p-p) Resolution :0,1µm / 0,5µm Max. response speed:250m/min Reference mark:1 Plunger actuation:Spring / Pneumatic Design:Straight / Angled / Flange type Clamp diameter:8mm Power supply:5V DC Output signal:TTL Linedriver RS422

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:786

The optical level switches of this series are ideal for the detection of fluids with low DK value, such as lubrication oil or hydrocarbons. Optical level sensors detect the change of the refractive index at medium contact with the transparent tip from polyethersulphone (PES) or glass. The sensors with stainless steel housing and glass tip are also suited for the detection of aggressive media, such as solvents. Also available with Ex certification according to ATEX and IECEx.

The BL57 is a high-resolution, exposed linear encoder with interferometric operating principle in transmitted light design. The BL57 has a graduation period of 1.6µm and generates a sinusoidal signal period of 400nm due to the laserscale operating principle. This allows resolutions of up to 6.1pm. to be achieved. Due to the high response speed of up to 3m/s, it is perfectly suited for high-precision and fast X/Y stages. Measuring lengths:30mm - 1060mm Accuarcy:+/-0,5µm to +/-1,5µm depends on measuring length Max. resolution:6,1pm Grating pitch:1,6µm Signal pitch:400nm Output signal:1Vpp, TTL, BISS-C, USB, 40bit binary Reference mark:1

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40

Les capteurs EGE utilisant le principe de mesure des micro-ondes guidées pour une mesure précise du niveau de remplissage sont utilisés pour les liquides les plus divers. Pour ce faire, des micro-ondes sont guidées dans la tige de mesure et réfléchies au contact du fluide. Le capteur détermine le niveau de remplissage en fonction du temps de propagation du signal. Un réglage sur différents fluides n'est pas nécessaire. Les capteurs permettent de déterminer exactement le niveau de remplissage dans des récipients en plastique ou en métal avec une grande précision de mesure, même dans des conditions difficiles. Les appareils disposent d'un écran bien lisible et mettent à disposition des signaux de commutation, une sortie analogique ainsi qu'une transmission de données par IO-Link.

The BL50H is a high resolution exposed linear encoder in reflective design. The BL50H has a grating period of 1.6µm and generates a signal period of 400nm with the Laserscale operating principle. The extremely small dimensions, made possible by the reflective design and large mounting tolerances, allow easy integration into X/Y stages and a wide variety of measurement applications. It provides a very high signal quality with low noise level and is suitable for resolutions up to 6pm at travel speeds up to 3m/s. Measuring lengths:30mm - 570mm Accuarcy:+/-0,5µm to +/-3µm, depends on measuring length Max. response speed:3m/min Output signal:1Vpp, TTL, BISS-C, USB, 40bit binary Grating pitch:1,6µm Signal pitch:400nm Reference mark:1

EGE Füllstandssensoren mit Mikrowellenmessprinzip und Schaltpunkt überwachen den Füllstand von Flüssigkeiten, Pulvern und Granulaten. Dabei sind sie besonders anhaftungsresistent. Die Sensoren MFC eignen sich darüber hinaus für die Trennschichterkennung. Die Empfindlichkeit ist einstellbar. Die Sensoren arbeiten mit einer speziellen Variante des Frequenzhub-Verfahrens. EGE liefert die Sensoren in verschiedenen Längen bis 1000 mm. Die Sensorspitze aus Edelstrahl und PTFE ist geeignet für den Einsatz in aggressiven Medien.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines. Material:Aluminium Size:40 Weight:1353