Izdelki za olje in (418)

Specifications/Approvals: Zinc-free hydraulic oils type HLP-D based on DIN 51524-2 (with the exception of demulsifying properties) with very effective detergent/dispersing properties and wear protection. Use, for example, in machine tools and hydraulics where there is possible access to water. Product number:1539133 Container size:208 Product group:Hydraulic oils

Light-colored piston lubricant with special additives for better adhesion and lubricating properties Type viscous oil Appearence light-coloured Properties and Advantages • increased service life of piston and shot sleeve • economical in use • reduced smoke and gas development

Waste oil disposal system for assembly pit diaphragm pump specification For the entire motor and commercial vehicle sector With pneumatic diaphragm pump (19 060), pump performance 55 l/min with free outlet, suitable for pipelines up to 20 m Saugschlauch, 2 m, G 3/4'' i/a (19 512) Pressure hose, 1.5 m, G 1/2'' i/a Wall bracket (87 626) With all necessary couplings, adapters etc. Tray (19 788), suitable for all standard pit profiles Product number:1517443 Container size:1 Product group:Miscellaneous

Suitable for basic cleaning of all floors like, parquet, plastic flooring, cork, PVC, linoleum, laminate, natural and artificial stone floors as well as tiles and rubber floors. Floor and Laminate Cleaner cleans waxed and oiled floors prior to a refinish and removes old gloss finish, polymer layers, waxes, oil films and other contaminants.

Aral HighTronic C is a high-performance engine oil in Aral synthesis technology specially developed for cars with diesel particulate filters that require an ACEA C1 or C2 engine oil ideally combined with Aral Low SAPS technology for maximum service life of the diesel particulate filter Low ash with fuel savings in conjunction with very high-quality base oils and additives Application - excellently suitable for vehicles from the former Ford PAG group: Jaguar and Land Rover - very suitable for French car brands: Peugeot and Citroen - meets the high requirements of Japanese car brands: Mitsubishi, Mazda, Honda, Subaru, Suzuki, Toyota and Nissan -suitable for American vehicles with European diesel engines , e.g. Jeep -can be used on commercial vehicles of Japanese design and Italian origin, e.g. IVECO -please note the respective vehicle-specific specifications Specifications ACEA C1, C2 Container size:208 Product number:1634607

Hydraulic mouthpiece-M 10 x 1 i SW 13 mm-Ø 15mm Product number:1507735 Container size:1 Product group:Grease guns

Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A Container size:20 Product number:1508025

Lubrication of chains, hinges, joints, clamping and drying frames, and slideways at higher temperatures For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Non-contaminating liquid lubricant for higher temperatures Highly effective due to optimum wear protection, outstanding oxidation behaviour and good creep properties Absolutely resistant to water and steam, inert with respect to acidic media Outstanding adhesion and lubrication effect with no tendency to drip and no formation of hard residues For best results clean the cold surface, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply sufficient amount onto the lubrication areas with brush, dip oiler, dipping or suitable automatic lubrication systems. Let excess drip off and let product affect before the beginning of operation. Instructions of the machine manufacturer have to be considered. Relubrication period and amount should be stated Operating temperature:-25 °C → +250 °C Density (20 °C):0.91 g/ml Viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):2,000 N

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):500 mm²/s

Aral HighTronic R is a modern low ash smooth-running engine oil in Aral Synth technology. It can be used in diesel engines (particularly with diesel particulate filter DPF) where a product according to ACEA C4 is required, such as in Renault cars with diesel particulate filter (DPF). The modern Low Ash technology protects against harmful ash deposits in the diesel particulate filter and thus supports their effectiveness and service life. Specifications ACEA C4 MB approval 226.51 Renault RN 0720 Container size:208 Product number:1508528

Aral SuperTurboral 5W-30 is a low-friction engine oil for use in almost all commercial vehicles that do not require a so-called "low SAPS oil". It enables significantly extended oil change intervals and offers significant fuel saving potential compared to conventional multi-grade engine oils. The excellent low-temperature properties and optimal wear protection, even under severe operating conditions, offer a wide range of applications. Advantages -Extended oil change intervals and thus reduction in operating costs -Excellent soot-carrying capacity reduces abrasive wear in the engine -Best engine cleanliness thanks to low deposits and an optimized detergent system -Year-round savings potential with quick oiling thanks to synthetic base oils with excellent Container size:208 Product number:1508776

Suitable for protects and preserves any wood outdoors, especially garapa wood, for example garden furniture, terraces, pergolas, fences, carports, log cabins and garden houses. The oil restores the surface's natural wood color. It effectively blocks UV-rays and protects the wood against decay. Deck & Cladding Oil for Garapa is a natural wood preserver made from weatherproof and durable oils and micro fine pigments, it is odorless when dry and free of toxic agents.

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free Operating temperature:-5 °C → +80 °C Density (20 °C):1.06 g/ml Viscosity (40 °C):20 - 24 mm²/s

The iFischer® DIST D5236 CC / FISCHER® AUTODEST® 860 AC is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The automatic fraction collector with 12 receivers includes a builtin internal balance, which is used for the simultaneous determination of the fraction weight and for the direct distillation rate control. The vacuum equipment and the control system are designed for highest accuracy, repeatability and reproducibility of data. Also available are the iFischer® DIST D5236 CC 50 ltr, 100 ltr, 150 ltr and 250 ltr fully automated computerised distillation systems acc. to ASTM D5236 equipped with a set of comprehensive safety features in correlation with the applicable EU Machine Directives and refinery standards. Numerous optional items available.

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1 registered MOSH-/MOAH-free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Also available as spray version OKS 3711 Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Specification Outlet pipe Anti-drip mouthpiece, automatically closing Special features For gear oil Product number:1519655 Container size:1 Product group:Miscellaneous

Sardinen ohne Haut und Gräten, 125g, in den Marken Le Pecheur oder Arcobaleno. In Öl oder Sonnenblumenöl beides auch in Bio. Der Anbieter stellt keine detailierte Produktbeschreibung zur Verfügung. GRÖSSE:125g MARKE:Arcobaleno REZEPTUR:in Bio-Sonnenblumenöl UMVERPACKUNG:50

Come la serie MA, un po' meno potente, garantisce un'aria calda assolutamente priva di gas di scarico. Inoltre, le unità non solo possono funzionare con olio, ma sono anche omologate per il funzionamento a gas. La modalità di funzionamento può essere adattata in modo flessibile alle condizioni del sito. Ciò significa che le unità possono essere utilizzate in tutti i settori. Anche i sistemi di tubi ad aria calda possono essere collegati senza problemi grazie ai ventilatori radiali ad alte prestazioni. Di conseguenza, è possibile riscaldare efficacemente anche dall'esterno senza problemi. Il modulo di ricircolo garantisce un funzionamento efficiente ed economico. I ventilatori dei bruciatori di gasolio sono realizzati con materiali di alta qualità da produttori rinomati. Funzionano in modo così efficiente che il 93% dell'energia può essere convertito in calore. Carico termico nominale:140 kW Potenza termica nominale:125 kW Portata d'aria:7300 m³/h Aumento della temperatura:50 K Consumo di olio:11,8 kg/h Collegamento elettrico:230/50/6,1 V/Hz/A Consumo di energia elettrica:1,38 kW Tubo di scarico:Ø 180 mm Ugello di uscita:Ø 550 mm Livello di pressione sonora:75 dB(A)

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-30 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):240 mm²/s Coefficient of friction SRV (DIN 51834-2, 50 °C):µ = 0.125

Like the slightly less powerful MA series, it is guaranteed absolutely exhaust-free hot air. In addition, the units can be operated not only with oil, but are also approved for gas operation. The operating mode can be flexibly adapted to the conditions on site. Thus, the devices can be used in all areas. Hot air hose systems can also be connected without any problems thanks to the high-performance radial fans. Consequently, effective heating from outside is also possible without any problems. The recirculation module ensures efficient and economical operation. The oil burner blowers are made of high-quality materials by renowned manufacturers. They work so efficiently that 93% of the energy can be converted into heat. Nominal heat load:140 kW Nominal heat output:125 kW Air volume flow:7300 m³/h Temperature increase:50 K Oil consumption:11,8 kg/h Electrical connection:230/50/6,1 V/Hz/A El. power consumption:1,38 kW Exhaust pipe:Ø 180 mm Outlet nozzle:Ø 550 mm sound pressure level:75 dB(A)

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements Operating temperature:-40 °C → +135 °C Density (20 °C):0.83 g/ml Viscosity (40 °C):66 mm²/s

Podobnie jak w przypadku nieco mniej wydajnej serii MA, zagwarantowane jest absolutnie wolne od spalin gorące powietrze. Ponadto urządzenia te mogą być zasilane nie tylko olejem, ale są również dopuszczone do pracy z gazem. Tryb pracy można elastycznie dostosować do warunków panujących na miejscu. Oznacza to, że urządzenia mogą być stosowane we wszystkich obszarach. Dzięki wysokowydajnym wentylatorom promieniowym można również bez problemu podłączyć systemy węży gorącego powietrza. W związku z tym możliwe jest również bezproblemowe efektywne ogrzewanie z zewnątrz. Moduł recyrkulacji zapewnia wydajną i ekonomiczną pracę. Wentylatory do palników olejowych wykonane są z wysokiej jakości materiałów przez renomowanych producentów. Pracują tak wydajnie, że 93% energii może być zamienione na ciepło. Nominalne obciążenie cieplne:140 kW Nominalna moc cieplna:125 kW Strumień objętości powietrza:7300 m³/h Wzrost temperatury:50 K Zużycie oleju:11,8 kg/h Przyłącze elektryczne:230/50/6,1 V/Hz/A El. zużycie energii:1,38 kW Rura wydechowa:Ø 180 mm Dysza wylotowa:Ø 550 mm POZIOM CIŚNIENIA AKUSTYCZNEGO:75 dB(A)

The iFischer® DIST D1160 CC / FISCHER® AUTODEST® 850 AC is a fully computer controlled unit of turn key design, and ready for use after installation and commissioning. The unit extends the current test method and does not limit your vacuum distillation testing options. You are able to define your own tailored program also beyond the current standard. The system is fully housed and equipped with doors in the front and rear to satisfy safety requirements and to facilitate service aspects. The design also grants an easy maintenance by the operator. The analysis protocol is printed out simultaneously to the distillation and the distillation curves in actual boiling temperatures (ACT) and atmospheric equivalent temperatures (AET) as well as essential distillation parameters are shown on the monitor. The final data and the distillation curves are printed and stored on harddisk.

Plunger oil (lubricant) with ultrafine graphite for extremely good adhesion Type medium-viscous graphite oil Appearence black Application drip, spray suitable for "vacuum" die casting Properties and Advantages • well balanced tribological characteristics • despite 10 % graphite in medium-viscous oil product is sprayable and perfectly stable • high pressure resistance • highly efficient, economical in use • protection from erosion • dry-running operation feature • recommended for Caro-Prometa plunger systems

Suitable for any parquet and wooden surface indoors. Especially bright wood such as maple keep their bright and even, beautiful surface after a treatment with Hot Wax Oil. Hot Wax Oil is made from select, high-quality natural waxes and natural oils. Hot Wax Oil is solvent-free.

The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. The sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Features: — nominal pressure: 0 ... 1 mH2O bis 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 35 mm — diaphragm ceramics Al2O3 (99.9 %) — excellent long term stability — integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — mounting accessories — different kinds of elastomer

Die Schalen aus der Macani Kollektion aus Eichenholz sorgen für Wärme und Behaglichkeit und sind ein absoluter Blickfang, als Wohnraumaccessoires sind sie vielfältig einsetzbar. Die hochwertig verarbeitenden Schalen mit ihrer puristischen und faszinierenden Form aus geöltem Eichenholz eignen sich als Tablett für die wärmende Tasse Tee, präsentieren wunderbar Snacks und Obst, sie eignen sich als stilvolle Unterlage für Pflegeprodukte oder setzen Vasen und Kerzenständer in Szene