Izdelki za olje in (115)

It separates all kinds of products from each other by grouping them in desired sizes. There are three types: pan sieve, vibro sieve and drum sieve.

It is one of the auxiliary equipment that prevents metal and metallic parts from damaging the system by attracting them. Most of the machines working in Flour and Feed Factories rotate at high speeds. Screws and similar metal and metallic parts that break off during operation in the natural environment where the product comes from and in other machines enter our working machines and systems and cause damage. The magnet helps catch these pieces before they enter our machines and systems.

Our drum type Pre-Cleaning Machines; It is produced in the capacity range of 20 - 100 tons per hour. With the ÇSI Pre-Cleaning Machine, all unwanted foreign substances (garbage, dust, straw, etc.) in all kinds of grains (wheat, barley, corn, canola, soybean, etc.) are perfectly separated at a level that does not require cleaning again. Thanks to its airlock and cyclone as well as its excellent filter, it leaves absolutely no waste in the environment. Our sieves, which are designed according to the structure of all kinds of products, are easily mounted on the machine. Thanks to the brushes placed on the sieves, the sieves constantly clean themselves as the machine operates. With its high suction power dust collection and filter system, it does not leave any dust waste in the environment. The Pre-Cleaning Machine, designed by ÇSI engineers using advanced technology, will provide the cleaning you need for many years.

This type of filters are used to separate dust particles from dust-laden air, they can be used with positive or negative pressure, the filter bag is cleaned by 0.5 bar pressurized clean air that does not contain oil and water.

TURN-KEY CATTLE FEED FACILITY

SLIDE

5 ROLLS FLOUR FACTORY WITH 70-75 TONS/DAY CAPACITY

In flour and semolina factories, it ensures rapid mixing of the product with water and helps shorten the tempering time. Their rotors consist of steel pallets. It is an effective machine in peeling as the grain moves by being squeezed inside the machine.

They are equipment used for storing and storing flour, bran and grain in mill systems.

Powering and controlling the motors within the system is done via MCC panels. Contains equipment required for MCC panels, main supply units and remote control. It also has the necessary communication infrastructure for PLC, central automation and SCADA systems. The system automatically protects the motors and all electrical equipment in the field against excessive voltage drops and rises.

It is used for vertical transportation of all kinds of grain products. Reducer selection is made according to the capacity and height of the elevators.

Blower pumps are used in mill systems to meet the air required by the supersonic filter and to transport products vertically and horizontally.

FLAP

We can manufacture silos in desired sizes and dimensions.

In feed mills, it ensures that materials that can be used in feed are weighed in very small quantities and with high precision and added to the mixer.

It enables the broken and crushed product in the rollers to be transported to the sieve and other machines. It absorbs the broken or crushed product through steel pipes and distributes it to cyclones and ecluses. Consists of outer body and fan part. The outer body has a snail structure. The internal fan is designed with paddles according to capacity. It is mounted coupled to the engine located on the outer body. The fan inside the body rotates at high speed and provides air suction and pressure. Since the fan is specially balanced, it does not cause vibration or noise. In addition, since the outer body is placed on the main chassis on special rubber wedges, it does not cause vibration on the chassis.

Pneumatic Cyclone Group is a system that moves the spilled product with air flow. The transportation process is carried out in pipes and the transported materials are sent to the Pneumatic Cyclone. Cyclones are made of sheet steel construction. It has a cylindrical-conical body and consists of an inlet and outlet pipe. It is designed to keep the air loss of the system to a minimum during the separation of air and product in the pneumatic system.

It ensures that flour and bran-like products coming out of the machines are returned to the factory.

PMX 800

It ensures the classification of the ground product in a clean and orderly manner, thanks to the freely swinging body and the crates of different sizes in each passage within the body. After being sieved and homogeneously separated, the product in various proportions is automatically directed to the outlet channel through the channels in the frame, the channels between the frame and the channels in the main chassis, and is discharged outside the outlet pipes through control pipes. The surfaces of the cases are covered with formica. The outer covers of the passage are insulated, thus preventing flour particles from leaking out. The product enters the first case as one or two batches from the entrance above the passage and flows along the passage height of all cases. By placing spacers between the frames of the main frames, the product output volume increases, accumulation

It is used to separate the products coming from bran brushes or filters. Thanks to the unbalanced weight attached to the rotor, it provides a more effective screening by making vibration movement. Rubber wedges on the chassis base prevent the transmission of vibration.

It cleans the stone, soil, all dust particles and bacteria of the wheat with water. It has a double seal device that prevents oil and water from mixing. The entry point of the wheat into the washing tub is moved back and forth to adjust the time the wheat stays in the water. The upper screw rotates rapidly and agitates the water, performing the washing process. Foreign materials (stones, etc.) heavier than wheat sink to the bottom and are thrown out by the gizzard screw rotating in the opposite direction. Light substances such as dust, straw and garbage in the wheat are collected on the surface of the water and thrown out with water through the husk hole. The wheat dragged by the upper screw goes to the vertical drying section working with the centrifugal system. Rapidly rotating pallets in vertical drying throw the product towards

Wheat etc. with different properties through its pockets of different sizes. It is used to mix the products in the desired ratio. There is a table on the machine showing the amount of product that will pass through each gap per hour. It can be entered from a single point or multiple entries can be made from different points of the silo.

It is used for cooling lumpy and granular materials in the food and feed industry. It provides effective cooling with the reverse air flow vertical cooling principle. It is easy to install and energy saving is high.

It is used to give water for tempering in flour factories. It works semi-mechanically.

Ventilation grilles are used on the ventilation channels at the silo bottom. Thanks to the structure and bottom supports of the grills, thousands of tons of grain are ventilated safely. Thanks to the structure of the holes on the grill, air from the fans easily passes into the grain and ventilation is provided. The diameters of the grill holes are determined according to the type of grain to be stored in the silo, thus preventing the grain from falling into the ventilation channels. Ventilation grilles are produced entirely from galvanized sheets, so that grains can be stored safely for many years.

Bucket elevators are the key elements of grain storage systems. Our high quality bucket elevators, which can be produced from 5 meters to 50 meters in length, have many size options and are produced in capacities of 10-500 tons/hour. Our bucket elevators have airtight observation covers that facilitate maintenance and cleaning work.

It is a machine that works with a fully compressed air system and is used to turn wheat coming from the cleaning unit into flour in flour factories. The chassis is made of sheet metal construction, and the sub-chassis is completely scanned on the borvek bench to ensure the parallelism of the balls. Rubber wicks are placed under the bed slides to absorb vibration. The properties of the rollers installed on the machine vary according to the diagram and are determined according to the purpose of obtaining the desired flour yield from the factory. All controls on the machine are made with the help of air stimulated valves and there is no electricity consumption. Depending on the amount of incoming product, the valves are stimulated, the pistons

CIRCULAR SIEVE

These are the panels where the main distribution of electrical energy is made in workplaces and factories. Distribution panels ensure that electrical energy is distributed according to need. While distribution panels distribute energy to the installation they are connected to, they also include protection elements that ensure the safety of the installation and the people using the installation.