Izdelki za oprema za carino (43)

Knight Optical can offer infra-red interference Shortpass filters for use in Heat Shielding. We supply a range of infra-red interference Shortpass filters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in Heat Shielding. Infra-red interference Shortpass filters are designed to transmit wavelengths shorter than the “cut-off” of the filter and to block bands above that. In many systems that require heat shielding while still needing visibility a shortpass filter can be used. These can attenuate infrared radiation and allow through visible light, which allows your temperature sensitive equipment to be visible. They can also be paired with a longpass filter to make a bandpass filters. Read PDF for more Information….. Material::(Fused Silica/Silicon/Germanium) Diameter & aperture (mm)::12.5mm ±0.1 (8.5mm aperture) Thickness (mm)::≤6.1mm +0/-0.1 CWL tolerance (nm)::± 20% of FWHM FWHM tolerance (nm): :± 20% of FWHM Optimum operating temp::23°C Edge treatment::Mounted in black anodized aluminium ring Surface quality: :80/50 Per MIL-0-13830A Usable temperature limits::-50°C to +80°C

UVFS prisms for UV wavelength 170nm & other high index materials in VIS apps - These dispersing equilateral dispersing prisms have a very simple triangular cross section. Equilateral dispersion prisms are commonly used for wavelength separations, i.e. refracting white light into a rainbow pattern effect. Depending on the material used equilateral dispersion prisms can be used over a wide range of wavelengths. We offer UV Fused silica prisms for use in the ultra-violet wavelength from 170nm and other high index materials which are used for visible applications. Antireflective coatings are applied to most of our high index grade of equilateral dispersion prisms as high index material is sceptical to staining and corrosion which anti-reflective coatings eliminate. Antireflective coatings also help to improve output of the light as they prevent light loss due to surface reflection. The exit beam is in general at an angle to the input beam, this angle depending on the prism material, the wavelength and the incidence angle READ PDF FOR MORE INFO Materials::UV grade fused silica,F2, SF11 or equivalent Dimensions::± 0.2 mm Surface quality::<60-40 scratch/dig Coating::Antireflective Coating for visible (AV7)

Knight Optical can offer Custom Homogenizing Rods for use within Fluorescence Imaging. Knight Optical supply precision optical components to customers in the medical industry for applications such as fluorescence illumination, microscopy and imaging. Homogenizing Rods are used within the application of surgical procedures; within systems designed to help identify which tissues have been exposed to the fluorescent indicator. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. With this it helps to control the light source being used in medical systems. Read PDF for more info Material::BK7, UVFS or Other Optical Glass Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optional

Intégrer efficacement la détection tactile dans diverses applications médicales - Nous avons été un innovateur et un partenaire de nombreux projets médicaux réussis au cours des 20 dernières années. Notre technologie brevetée ouvre de nouvelles possibilités dans le domaine médical, et notre équipe possède l'expérience et l'expertise nécessaires pour intégrer efficacement la détection tactile afin de réaliser des percées dans le domaine médical. Que vous souhaitiez simplement intégrer nos capteurs pour la capture de données ou que vous recherchiez un partenaire agile et compétent pour vous accompagner de la conception à la réalisation, nous sommes là pour vous aider. Exemples : KIT DE DÉVELOPPEMENT PULSE - Mesure et analyse des formes d'ondes du pouls. SURETOUCH - Un système de détection de lésions mammaires approuvé par la FDA, sans radiation. MANOSCAN - Un cathéter œsophagien haute résolution. WRIST-AID - Un dispositif de traitement non invasif du syndrome du canal carpien.

A broad variety of gas transmission cells are : Gas Cells analysis of gas & vapour phase components in IR optical spectroscopy. These range from short path length gas cells for percent level concentration measurement, to long path length gas cells for part-per-billion concentrations. Options include fixed and variable path length gas cells, as well as ambient temperature and heated gas cells. The windows that can be used with the gas cell include NaCl, KBr, CaF2, BaF2, or ZnSe infrared transmission windows, which are mounted in an optical spectrometer. Knight Optical supply high quality Gas Cells optical components made to our exacting specification. For more information read the PDF

Knight Optical can offer Rhomboid Prisms for use within Imaging Applications. We supply a range of Rhomboid Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Applications. Rhomboid Prisms are designed to displace a beam laterally while maintaining its direction. Rhomboid prisms rely on total internal reflection and so do not often need to be coated For more information read the PDF… Material::N-BK7 or equivalent Dimensional Tolerances::+/- 0.2mm Angles::+/- 3 arc minutes Surface Figure::< 1 waves Surface quality::< 40-20 Scratch/Dig Coatings::< AR Coatings available on request

Here at Knight Optical, we understand that there is no one size fits all for your optical component specifications. That is why – as well as edging down our stock optics – we also offer our entire range as custom-made components. This bespoke option is popular across a variety of sectors such as defence and aerospace, medical and research as well as engineering and manufacturing industries; to name a few. By opting for our customised service, not only will you be able to choose the material, millimetre-perfect dimensions and thicknesses best suited to your application, but you will also be able to pick appropriate optical coatings to protect or enhance your device's operability. If you would like to discuss your optical requirements with a member of our team or to find out more about our custom-made optics, please get in touch on +44 (0)1622 859444, choose option One. Alternatively, click here to view our full range of custom-made optics.

We supply a range of diamond turned germanium aspherics for a range of applicati - Diamond turning is an Aspherics best friend! Knight Optical can offer custom made Diamond turned aspheric lenses for use in missile guidance systems, night vision/thermal Imaging cameras and other military based and commercial infrared systems. We supply a range of diamond turned germanium aspherics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. The benefit of Diamond Turned Aspherics, are that lens shapes can be manufactured very accurately without an expensive tooling cost except for the diamond bit; and is cost efficient for small quantities. Which are ideal for use within the Defence and Aerospace Industry. Knight Optical offers diamond turned aspherics from a range Read PDF for full specification… Material::Germanium, ZnSe, Caf2, Silicon, Zinc Selenide (For LWIR) Diameter::Up to 200mm dia +0, -0.02mm Thickness::+/- 0.2mm Flatness::< 1/2 wave over 90% aperture Surface Quality::< 40-20 scratch/dig Parallelism: :5 arcmin Coating::AR/DLC (3-5 micron, 7-14 micron, 10-12 micron)

Knight Optical can offer you stock and custom lambda/10 mirrors for use in imaging applications, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality imaging. Read PDF for more information… Material::N-BK7 (or equivalent), Zerodur, UV Fused Silica, Borosilicate Shape::Circular, Square or rectangular Dimensional Tolerances::+/- 0.5mm Parallelism::< 3 arcminutes Surface quality::<10-5 Scratch/Dig Flatness:: λ/10 or λ/20 over 90% of mirror aperture Coating::A range of mirror coatings to suit your wavelength

Knight Optical can offer Pellin-Broca Prisms for use within Atomic Spectroscopy. We supply a range of Pellin-Broca Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Atomic Spectroscopy. Pellin-Broca Prisms are designed with a given material, angle and wavelength in mind to perfectly deviate a beam of the given wavelength by 90 degrees. These are often used to separate beams of differing colours and as such are ideal for use in optical atomic spectroscopy or to separate outputs of a multi-line laser. For more information read PDF…

Knight Optical can offer custom Rod Lenses for use within Optical Systems. We supply a range of custom & stock Rod lenses for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers with Optical systems. Rod Lenses are a special variant of cylindrical lenses so they focus light to a line. Rod lenses have an outside face that is polished and the ends are ground. Typical uses for rod lenses would be to generate a line image from a circular laser beam. Rod lenses can be cut at 45 degrees for use in beam steering and other similar applications. For more information read PDF ….. Material::N-BK7 or equivalent, Borosilicate, UV Fused Silica Shapes::Plane, 45° Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 40-20 Scratch/Dig Surface Figure: :< 5(1) @ 633nm Coating::Antireflective coatings for application bandwidth (if required) Mounting::Available on request

Knight Optical offer a range of Stock Polarisers that can be used in the study of insect vision. Insects exhibit sensitivity to linear polarised light. Insects polarise light in their vision for a number of reasons such as reducing glare and to increase contrast. This is also widespread practice in most modern cameras to help ensure the resulting image is as sharp as possible. Additionally, recently the study of insect vision has allowed researchers to modify camera systems incorporated in aerial drones to help fly independently through dense forests by assessing light intensity to avoid other objects. Knight Optical works with many leading research institutions in the field of insect vision. Knight Optical also keep stock a UV and NIR range of sheet polarisers. In particular our HNP’B replacement UV polariser which has excellent performance from 250-750nm is utilised heavily within the research of arthropod vision. Read PDF for more information Material::HNP’B Replacement Diameter Tolerance::+0.0/-0.25mm Axis direction: :±2°

Quartz optical surfaces flat is tested on our Zygo Verifire XPZ interferometer - Optical flats are single precision flat surfaces. They are used as reference surfaces to compare flatness of a substrate where flatness is unknown. When a high quality optical flat is placed on top of a polished substrate and used in conjunction with a monochromatic light source light bands are formed. The light bands that are present are known as interference fringes and their shape represents how flat the part being tested measures. Dependent on how many rings are formed or how straight the presented lines are is an indication of how flat the tested part is. Optical flats are used for testing gauge blocks. Optical flats are also used in interferometers and high quality flat optical mirror and window sub-straights for laser applications. This range of quartz optical flats are single-sided. Quartz has low thermal expansion properties and is very durable and cost effective solution over UV grade fused silica. Read PDFs for more information Material:-:Quartz Surface quality::<60:40 scratch/ dig Surface finish::<5 angstrom off pitch Flatness face 1& 2 on dual face polished flats::As specified over 90% aperture Flatness face 1 on single sided polished flats: :As specified over 90% aperture Flatness face 2 on single sided polished flats::Commercial polish Parallelism::<5 arcmin (or better if required)