Izdelki za oprema za embalažo (87)

GEM F470 - F520 - F670 CARTON SEALERS WITH MANUAL ADJUSTMENT - AUTOMATIC FLAP CLOSER AND SIDE DRIVE BELTS Carton sealer with manual dimensioning and and automatic flap closer. It folds automatically the four upper flaps and seals with auto-adhesive tape the top and bottom of batches of uniform size, American-type boxes. The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed. The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing. Example model:GEM F470 Boxes width min:mm 100 Boxes width max:mm 520 Boxes lenght min:mm 150 Boxes lenght max:mm 600 Boxes eight min:mm 100 Boxes eight max:mm 670 Tape width:mm 50 (75 option) Operation speed:22 m/min Compressed air:6 Bar Air consumption:2,5 Nl

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt. Example model:FM 180 A Load (Kg):1800 Lift height (mm):100 Lifting plate (mm):600x60 Wheels (diameter):150

The MINIMA packaging machine designed for medium/small production realities (artisanal, commercial, etc.), makes versatility and minimum bulk its strengths. Absolute reliability and high efficiency, combined with high operating silence, low energy consumption and ease of use, unique in its kind, are qualities that make it a cutting-edge product. All the functions of the machine are displayed and controlled electronically thanks to the digital panel. The dimensions of the support surface are 350x240x140 mm h (height of the closed hood) The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. The choice of the machine must take into account that: the front opening of the "Minima" bell is 23 cm but laterally drops down to zero the dimensions of the box (height + depth) must not exceed the width of the reel 350 mm also considering that there must always be at least 50 mm of waste. Sealing bars dimensions:mm. 380 x 250 Chamber internal volume:mm. 350 x 240 x 140 h Max. coil size:diam. mm. 250 - width mm. 350 Power supply:220V Installed power:1 kw Actual consumption:kw 0.55 Machine dimensions:mm. 930 x 550 x 370 h. Package Dimensions:mm. 1040 x 650 x 570 Net/Gross Weight:Kg. 36/48

CARTON SEALER MACHINE MOD. GEM 350 / GEM 360 / GEM 820 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Ideal for fixed format boxes close (with constant height and width). Structure of the machine body made of sheet steel bent, bolted and painted. The movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. Example model:GEM 52 minimum width:100 mm with 50 mm head/150 mm with 75 mm head maximum width:mm 500 minimum length:mm. 150 maximum length:unlimited minimum height:mm 100 maximum height:mm 500 Max tape width:mm 50 (75 optional) Operation speed:22 m/min.

COMPLETELY AUTOMATIC STRAPPING MACHINE MOD. JN85-M Fully automatic strapping machine with high speed and reliability. The machine is equipped with motorized belts for insertion in packaging lines, aluminum arc with multiple flaps to facilitate the launch of the strap and the subsequent release and electrical system with Omron PLC. The electrical panel of the machine can manage the motorized loading and unloading belts (optional) and allows the use of the strapping machine in lines without operator. Strap width:mm. 9-12 Strap thickness:mm. 0,5-0,65 Reel internal diameter:mm. 200 Power supply:400 V. three-phase Weight:307 Kg

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator. Strap width:mm. 12 Strap thickness:mm. 0,6 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:200 Kg

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

The shrink tunnel, equipped with temperature adjustments, height and speed, is incorporated in order to make the machine compact and versatile, suitable for series production. The welding time is electronically set and the absence of fumes is ensured by teflon-coated blades. The sealing bar motorized, equipped with security system, the closed circuit cooling plant and motorized scrap-winder, are part of the standard equipment of the machine. FEATURES Digital panel with 6 programs Descent sealing bar manual or automatic Discharge conveyor for product Legs with locking wheels Only welding and welding + retraction Sealing bars with closed-circuit cooling system and patented safety system Emergency switch Teflon coated sealing bars Electromechanical automats Welding speed automatic controller Motorized conveyor belt with adjustable height Motorized scrap-winder Air flow shrink tunnel swiveling Adjustable temperature with electronic temperature controller Sealing bars size:mm. 550x420 Support plan size:mm. 500x380 Max pack height:mm.200 Tunnel entrance size:mm. 440 x 240 h. Power supply:380V Installed power:5,7 kw Max reel width:mm.600 Hourly production:900 pcs machine size :mm.2330 x 730 x 1380 h Package Size :mm. 900 x 2400 x 1550 h Net/gross machine weight:287 /343 Kg

Pneumatic clipping machine suitable for closing bags with twistband (plastic band with one metal core), max. diameter of binding mm. 11-28-38. Bag sealer mod. MINI TWIST working with twistband wire (plastic wire with metal core). Robust and secure machine, entirely made of painted steel suitable for closing packs with easily opened plasticised wire. The parts in contact are entirely made of aluminum. Available in 3 models. Example model:TWIST 100 Working:pneumatic Air consumption:50 Lt. / min. Air pressure:6 bar Machine cycles:40 pcs./min Autonomy:about 6000 clips Type of seal:Twisted lace Length reel:600-800 mt.

Bench cutter with lever, portable, suitable for cutting of cardboard corners. Equipped with ergonomic handle with safety latch to lock it when the cutter is not in use and a small compartment for storing rulers, blades, markers and pens and leave the workbench ordered. Operation is very simple, simply enter the portion of the corner you want to cut into the slot and pull the lever down. The cutter is used during packaging operations to cut safety corners, normally 2 meters long, into smaller pieces to be placed on the corners of boxes and pallets to strengthen them and protect them during transport. Dimensions:mm. 530x210x350/830h closed/fully open lever Lever lenght:about 500 mm Corners size:maximum mm. 100x100x10h.

FC LINE HOOD PACKAGING MACHINE The FC LINE has a fresh design and solid structure, an electronic of new generation, and several other technical improvements which improve even more the performances of these machines. Three models are available with a support plan of mm. 400x250x200h - mm. 520x390x250h - mm. 580x780x250h. The dimensions of the support surface are to be considered with the closed hood. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. Example model:FC 76 Film:PVC – PPL Max output (p/h (pph)):200-300 Useful sealing bars dimensions (mm):550x420 Internal hood volume (mm):520x390x250h Max film roll dimensions (diameter) (mm):D.250x600

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the pallet base and press the start button. The table starts to turn, after a few turns, press the coil rise button and hold it. When the coil of film reaches the top of the load stop the machine or press the down button to perform the double winding. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film MAX CAPACITY:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:4 - 7 rpm with inverter Turntable height:mm. 90 Power supply:380V - 50Hz Installed power:Kw. 0,6 Dimensions:mm. 1500 x 2500 x 2250 h

The inverter allows the progressive adjustment of the rotary table, avoiding the immediate start that could cause possible damage to the products on the pallet. Wrapping machine with rotating table mod. FP ECO/A with photocell to height reading of the pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (Machine CE). Maximum load:Kg. 2000 Pallet max height:mm 2200 h (2400 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,4 Machine dimensions:mm. 1500 x 2150 x 2450 h Weight:Kg. 350

BASE CARTON SEALER B52/B670/B820 Base for the closure of only the funds of boxes by means self-adhesive tape. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. The taping bases can be used both in semi-automatic lines with operator and in automatic lines or with box formers. The GEM B52 model is available in the version without guards for semi-automatic use or with side guards for insertion in the line. On the other hand, the B670F and B820F versions are only available with side protections for use in automatic lines or in combination with an automatic box former. The GEM B52 models can also be made of stainless steel. Example model:GEM B52 Boxes width min.:100 mm with 50 mm head/150 mm with 75 mm head Boxes width miax.:500 mm Boxes length:Min. 150 mm - max. unlimited Boxes height:Min. 100 mm - max. 500 mm Tape width:50 mm (75 optional)

Automatic strapping machine mod. JN85-R with reduced welding plate (width mm. 27 instead of the standard mm. 60) for the automatic strapping of products with small size. Special machine designed to avoid issues in strap releasing in case of strapping of profiles, beams and small packages. The launch of the strap is operated with the foot control or the button. The strap is tighten, heat-welded and cut. The holding capacity of strap depends on material type and on strap choice. Strap width:mm. 9 – 12 – 15 Strap thickness:mm. 0,5 - 0,65 Reel internal diameter:mm. 200 Power supply:380 V 3 phase Weight:190 Kg

Wrapping Machine Mod. FP 15 SE/T with table cut for loading and unloading with pallet, and safety photocell, photocell height sensing pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (machine CE). NOTE: the machine is loaded from the side. When ordering, with a surcharge, it is possible to obtain the modification for the front load. UPON REQUEST WE CAN MAKE WITH WRAPPING MACHINES: Rotary table diameter mm. 1800 (pallets up to 1300x1300 mm)Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. Capacity:Kg. 1000 (1500 kg with optional) Turntable diameter:mm. 1500 Max dimensions pallet:mm. 1000 x 1200 Max height pallet:mm 2200 h (3000/3200 mm with optional) Turntable speed:4 - 7 rpm Turntable height:mm. 90 Power supply:380V three-phase 50Hz. + T + N Installed electrical power:Kw 0.6 Dimensions:mm. 1650x2520x2560 h Weight:Kg. 550

Horizontal ring wrappers with automatic hook/cut of the film and manual progress - Wrapping machines with rotating ring series RING BOX EVO with automatic hook/cut of the film automatic and manual advancement, for the packaging with stretch film of sections, bars, boards and products with elongated shape. Practical and economical, allow to lower operating costs thanks to low consumption of energy and materials. The introduction of the products to be packaged is manual and is made by sliding them on a idle roller conveyor. By a foot pedal, is carried out the winding of the film on the product to the desired time; at the end of the cycle, with a slight movement of the pack, is obtained the cold-cutting of the film. All operations are controlled by PLC. Example model:RING BOX EVO 70 Internal ring diameter:mm 700 Max. rectangular section:mm 550x300 Min. product lenght:mm 500 Max. product lenght:unlimited

HOOD PACKAGING MACHINES - FP 5540 – FP 7060 SERIES L-seal hood shrink packaging machine combines sealing with shrinking into one step. The operator places the product between the two layers of mono-fold film, then moves the package into the sealing area and lowers the hood. When the shrink time is completed, the hood is returned to the up position and the operator may remove the completed package . The transparent cover makes the process of sealing & cutting and shrinking be visible. Colours: dark gray or orange depending on availability. It suitable for PVC shrink films with max. thickness 30 my and POF shrink films with max. thickness 19 my. Two models are available with a support surface of mm. 500x400x250h - mm. 650x550x300h. The dimensions of the support surface are to be considered with the hood closed. The volume cannot be completely filled by the box or by the product to be packaged as space must always be left for the passage of hot air around the product. Example model:FP 5540 Sealing bars dimensions:550x440 Internal hood volume (mm):500x400x250 h Max film roll width (mm):580 Usable film:PVC max. thickness 30 my PPL max. thickness 19 my

BS-5540M-ECO SHRINK TUNNEL - complete with wire mesh carpet for small products Shrink tunnel with high thermal insulation and ample power for all types of shrink film including the film in PE. Maximum thickness film thermoretracting 100 my. In conjunction with the angular sealer BS 8060 L is a complete system for packaging bags, bottles, cans and many other products with high weight. Of course it can be used separately or in combination with other machines. MAIN FEATURES - Finned heaters; - Dual fan for air circulation; - High thermal; - Conveyor belt with metallic mesh; - Conveyor with adjustable speed; - Fan for cooling packages; - Structure with wheels and adjustable feet. Voltage (V-Hz):380-50 (triphase) Power (kW):23 Loading (kg):40 Conveying Speed (m/min):0~8 Tunnel Size (L×W×H) (mm):1450×480×380 External Dimensions (L×W×H) (mm):2550×850×1500 NET WEIGHT (kg):400

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. Strap width:mm. 5 – 9 – 12 Strap thickness:mm. 0,5-0,6 Air pressure:6/7 bar Air consumpt:12 Lt. / sec Weight:100 Kg

Place the pallet on the platform, attach the film to the base, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. On requrest we can produce wrapping machines with: Rotary table diameter mm. 1800 - 2000 Electronic balance with load cells Load/ Unload rollers STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product Maximum load:Kg. 2000 Pallet max height:mm 2200 h (2700 mm with optional) Turntable diameter:mm. 1500 Height of turntable:mm. 75 Power supply:380V 50Hz. + T + N Installed electric power:0.75 kW Machine dimensions:1500 x 2500 x 2550h Weight:Kg. 500

Rotating platform Mod. FP T 1500 with recess for transpallet insertion, table diameter mm. 1500 and 90° load (only base without column). Following some modifications made to the machines it is no longer possible to have front loading. The pallet must not have the lower sleepers on the insertion side of the pallet truck. In the basic version, for safety reasons, the operator must always keep the button or the footswitch pressed during winding. Releasing it, the rotary table stops randomly, so you must manually align the platform to the unloading position. When ordering, it is possible to purchase the surcharge for the electrical system with PLC LOGO SIEMENS, complete with safety photocell on the pallet load, programming of the number of revolutions, variation of the table speed (inverter) and stop in the unloading position. With this modification the power supply of the table goes from 380V to 220V. MAX CAPACITY:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:7 rpm Turntable height:mm. 90 Power supply:380V - 50Hz (220V with PLC optional) Installed power:Kw. 0,4 Dimensions:mm. 1650 x 2520 x 500 H Weight:Kg. 300

The robot stretch wrapping machine model. FP EASY ECO, battery-powered and automatic steering with overrunning side wheel (CE). Turning around the pallet automatically performs the film wrapping or network. Equipped with manual steering for driving forward and backward buttons, traction batteries maintenance-free gel, current transformer 24 V DC - 220 V AC, built-in charger, electric motors, three-phase inverter driving wheel height adjustment, front bumper security.Place the machine near the load to be wrapped Hook the film or the net to the load Select the wrapping program Press the start button The machine rotating around the load makes the winding and stops at end of cycle Cut the film manually Please note that the machine has a driving wheel side wheel to be placed in contact with the load, if the load surface or irregular shape must assess the suitability. Max height of load:mm 2000 Integrated charger:220V Autonomy:100 pallets Dimensions:mm 700 x 1500 x 2250 h Weight:Kg. 250

New packaging system that creates air cushions on the spot. Fast, cheap and sile - The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products. Speed:0-20 m/min Cushions width:mm. 200-400 Film thickness:20 micron Sealing temperature:90-150°C Absorption:450W

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

FP 15 SE STRETCH-WRAPPING MACHINE with electronic board and digital keyboard, inverter to control the progressive start and turntable rotation speed, 4 wrapping programs, electromagnetic clutch for film tension control, photocell for automatic reading of the pallet height, manual hook up/cutting of the film, and automatic wrapping cycle (CE-standard). Max load capacity:Kg. 2000 (3000 kg with optional) Turntable diameter:mm. 1500 Max pallet dimensions:mm. 1000 x 1200 Max pallet height:mm 2200 h (3000/3200 mm with optional) Turntable rotation speed:4 - 7 rpm Turntable height:mm. 75 Installed power:Kw 0.6 machine size :mm. 1500 x 2500 x 2550

Suitable for all types of neutral or printed film (preferably with antistatic treatment) or tubular polyethylene with thickness from 0.06 mm to 0.13 mm or tubular polypropylene with from 0.03 mm to 0.05 mm thick, and cartene normal or high density. Furthermore, with the FP BAG EVO it is also possible to use expanded polyethylene (FOAM) in tubular reel with a maximum thickness of 1.5 mm. It can use reels with a width of 80-300 or 100-500 mm without disassembly of parts or changing settings. The packaging machine automatically perform the forming of the bag with the upper opening. The filling of the bag and the subsequent closing can be done manually by an operator who starts the cycle of the machine through a button, or automatically by means of feeders, manipulators, weighers. The reel change takes a maximum of thirty seconds. The machine cycle time for the preparation of a bag 200 mm long is about four seconds. Example model:FP BAG EVO 300.1 Film reel width:mm 80-300 Reel external diameter:max. mm 350 Reel maximum weight:kg 15 Bags lenght:mm 25-999 Production:10-20 pieces/minute (depending on the length) Usable film:tubular polyethylene thickness from 60 to 130 microns Usable film:expanded polyethylene with a maximum thickness of 1.5 mm Usable film:polypropylene and HDPE film with thickness from 30 to 50 microns

BS 8060 LINE SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Large angular packaging machines with manual or automatic closing of the sealing bar and motorized carpet for product discharge. This machines are capable of packaging bulky products using any type of single-folded film reel (PE-PP-PVC). The package is sealed on all sides, and if you want a thermo retracted packaging, the machine can be matched to the powerful tunnel BS 5540 M. Features: NI-CR sealing blade with non-stick coating Sealing time control to avoid overheating Adjustable conveyor height by handwheel Double magnet for a high closing force Reel sliding on recirculating ball guides, useful width mm. 750 Return of the sealing bar controlled by a gas spring (for manual version BS 8060L) Pneumatic device (compressed air) for closing and opening the sealing bar (for the semi-automatic version BS 8060LA) Example model:BS 8060L Sealing bars dimensions (mm):800x600 Support plan dimensions (mm):780x580 Max. product height (mm):250 USABLE MATERIALS:PVC, POLYOLEFINS, CRYO THERMO

TAPING MACHINE MOD. FP 9036 WITH MANUAL ADJUSTMENT AND 2 LATERAL DRIVE BELTS The taping machines series FP9036 and FP9037 are used in semiautomatic lines for the quick and safe closure of boxes using adhesive tape. The two taping heads simultaneously apply a strip of tape above and below the box. Depending on the size of the boxes (height and width), the operator must adjust the taping machine using handy handwheels. In the FP9036 model the structure of the machine body is in painted steel sheet and the cartons are dragged through 2 side drive belts. The machine is complete with 2 idle roller conveyors attached to the taping machine with length mm. 400 (for loading and unloading). It is equipped with wheels with brakes. Min. size (LxWxH):150 x 120 x 100 mm Max size (LxWxH):unlimited x 500 x 500 mm Tape width:50 mm Tape type:PPL-PVC Operation speed:20 m/min Belt drive :Left and right

Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product. Max capacity:Kg. 1000 (1500 with optional) Turntable diameter:mm. 1500 Max. pallet dimensions:mm. 1000 x 1200 Turntable speed:adjustable 4 - 7 rpm Power supply:380V 50Hz. + T + N Installed electric power:Kw 0,6 Machine Dimensions:mm.1500 x 2500 x 2250 h Weight:Kg.380