Izdelki za oprema za laserje (10)

Knight Optical supply custom laser mirrors for use at specific laser lines from the UV (200 to 400nm) to the IR (1to 40µm) wavebands. The laser mirrors can be custom made to include the following range: 1 YAG laser mirrors (High power grade) 2 Excimer laser mirrors (High power grade) 3 Argon-ion laser mirrors (High power grade) 4 Diode & broadband (Ti:Sapphire) These mirrors are made from vacuum depositing thin films of material that have differing refractive indices & thickness onto suitable substrates. Typical custom laser mirror substrates are calcium fluoride, germanium, sapphire, fused silica and Zinc Selenide which produce a high efficiency reflecting surface at the laser wavelength. Read PDF for more information. Thickness: :2mm to 10mm+ Parallelism::Parallelism: Surface form: :< 0.1 fringes Surface quality::< 10:5 Peak reflectivity: > 99.8% Material options: :Fused silica, BK7 or equivalent Coating options: :Argon-Ion, Eximer, Nd:YAG, Diode Laser

Binocular integrated carbon fibre structure. Dynamic measurement technology, less sensitive to vibration and noise in the workshop. Duel scanning mode. The Hyperscan 3D Laser Scanner also supports scanning with tracked by self positioning system, and scanning without tracker using markers and positioning system. Can utilise a wireless portable CMM using the ZG Probe and get efficient, accurate GD&T. 34 blue laser lines, scanning speed up to 2,100,000 measurements/s Fine details scanning up to 850,000 measurements/s 7 parallel blue laser lines to capture super clear and precise details

Being the third generation of laser hair removal products, the Diolight® laser system uses 808nm wavelength for deep penetration into the follicle to provide effective treatment of all skin types, while avoiding unwanted heating of the epidermal melanin. The Diolight® active tip cooling system protects the epidermis, provides an anaesthetic effect and permits the use of higher energies for more effective treatments. The large spot size permits a fast and effective treatment of all body areas, while optimum automatic adjustment of pulse width (between 10-200ms) is used to match the thermal relaxation time of hair follicles. The Diolight® Laser System’s design combines: Comfort during treatment Minimal risk of infection Speed Accuracy

for use with CIJ & laser printers for coding on underside of cans, jars, tubs & bottles whilst passing along a conveyor.

The SUPERfume Tent is a rapidly deployed enclosure for use with portable cyanoacrylate fuming system - SUPERfume. This tent is ideal for the fuming and subsequent examination of cars and small commercial vehicles. The weatherproof tent can be erected on hard or soft ground and once the frame has been expanded and the roof is in place it can be lifted and moved into position causing minimum disturbance to the crime scene. Once in position the side walls are attached to the frame and the fuming process can be initiated. Efficient seals ensure that levels of humidity and cyanoacrylate vapour are maintained at effective levels. Should larger areas be required several frames can be linked together.

Knight Optical can offer Lithium Fluoride Windows for use within UV Applications. We supply a range of lithium fluoride windows for a range of applications. All individually QA checked &metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes & shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers using UV optics such as UV lasers. UV lasers are beneficial in some applications as opposed to longer wavelengths such as infrared or visible light as they do not heat the areas around the target. This allows the laser the cut materials by breaking atomic bonds, rather than melting the material. Due to the large band gap for Lithium fluoride, it’s crystals are more transmittive to short wavelength UV radiation than any other material and are ideal for use in X-Ray monochromators, as for use in VUV, UV, Vis and IR spectrums. Read PDF for more info…. Material::Lithium Fluoride (LiF) Shape::LiF Circular Windows, LiF Square Windows Dimensional Tolerances::+/- 0.1mm Parallelism::< 3 arcminutes Surface quality::<60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

The laser mirrors can be custom made to include the following range: 1 YAG laser mirrors (High power grade) 2 Excimer laser mirrors (High power grade) 3 Argon-ion laser mirrors (High power grade) 4 Diode & broadband (Ti:Sapphire) These mirrors are made from vacuum depositing thin films of material that have differing refractive indices & thickness onto suitable substrates. Typical custom laser mirror substrates are calcium fluoride, germanium, sapphire, fused silica and Zinc Selenide which produce a high efficiency reflecting surface at the laser wavelength. The coatings are assembled assuming that the mirror will be working in the plane of incidence. This is essential as any off-axis angles will push the pass band toward the shorter waveband that could be beyond the pass band for one or both polarizations (s and p). If off-axis reflections are needed, such as at 90°, then this coating needs to be applied for an Angle of Incidence (AOI) of 45°. READ PDF FOR MORE INFO .. Thickness::2mm to 10mm+ Parallelism::< 3 arcseconds Surface form: :< 10:5 Peak reflectivity: > 99.8% Material options: :Fused silica, BK7 or equivalent Coating options: :Argon-Ion, Eximer, Nd:YAG, Diode Laser

Knight Optical We can offer Custom Moulded Aspheric Lenses for use with Laser Diode Collimators. Aspheric lens surfaces are used to correct spherical aberration (where the converging light from a lens does not have a common focal point, resulting in a distorted image) in lasers and imaging. Traditional spherical lenses cannot collimate light effectively because even small angles of incidence can produce spherical aberrations. This can mean that several components may be required to get the desired result. The non-spherical surface of an aspheric lens allows a single component to effectively focus or collimate even highly divergent emissions, potentially replacing a multi-lens system with a single aspheric lens. Therefore Aspheric Lenses that are moulded are ideal for use within laser diode-to-fibre coupling applications. For more information read PDF …. Material::Optical Glass or Acrylic Overall Diameter Tolerance::+/-0.2mm Focal Length Tolerance::± <5% Surface quality::<60-40 Scratch/Dig Coating::Optional

Knight Optical can offer Cube Beamsplitters for use within the Scientific Industry. We supply a range of Cube Beamsplitters for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in the scientific industry for use as components within spectrophotometers and interferometer. For interferometry, beamsplitters are used to separate light into two beams to compare a reference against a sample. Cube beamsplitters offer some advantages over plate beamsplitters in that they don’t suffer from ghost images and are easier to mount. For more information read PDF… Material::N-BK7 (or equivalent), UV Fused Silica Wavelength Ranges::Visible (400-700nm), NIR (630-1100nm), Telecom (1050-1700nm) Dimensional Tolerances::+/- 0.3mm Parallelism::< 3 arcminutes Surface quality::<40-20 Scratch/Dig Coating::AR coatings for application bandwidth on external surfaces

Designed and manufactured in the United Kingdom Large, easy to read touch screen display A dream to operate Advanced cooling system Smooth maintenance Applicator spot sizes from 1cm2 to 22cm2 Effective on light coloured hair Our British manufactured, medical grade and CE approved Zeolight® aesthetic laser system harnesses three technologies producing a powerful combined energy source comprising bi-polar radio frequency (RF) with intense pulsed light (IPL) and Nd:YAG. The Zeolight® treats a vast range of dermatological conditions and achieves impressive results in absolute safety with minimal discomfort and downtime. . Congested skin . Rosacea treatment . Hair removal . Cellulite reduction . Tattoo removal . Minimise scarring and stretch marks . Treatment for sun damaged skin . Skin resurfacing . Skin tightening . Wrinkle reduction The Zeolight® is a broad spectrum laser. This increases the opportunity for selectivity and allows for deeper dermal penetration.