Izdelki za oprema za modele (133)

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! Grace à la fabrication sur mesure, vous avez la possibilité d’assortir avec le même revêtement l’ensemble de nos fauteuils fixes/motorisés et repose pieds/pouf. UGS :PPMCCILF POIDS:15 kg DIMENSIONS:45 × 30 × 38 cm

Roof exhaust fans prevent grain spoilage by providing efficient ventilation. These high-capacity fans function as a vacuum cleaner and eliminate dust on your grain. The most ideal form of silo ventilation; While the ventilation fans are on, the exhaust fans are kept open at all times. Thus, while the grain is completely ventilated, the moist air is easily expelled out of the silo.

Manual winch lifter with aluminum frame, 4 models with capacities from 160 to 227 kg, max lifting from 1800 mm to 4200 mm. General features: Compact design; Made of aluminum, lightweight and durable; Access to individual ports; Forks standard steel; Non-marking rear wheels of 20 cm and double front swivelling wheels of 5 cm (only on the standard base and straddle base); Rear swivelling wheels of 12,7 cm. with lateral brakes and fixed front wheels of 10 cm (only on the counterweight base); Easy to load and unload on vehicles for transport; Safety fixing of transportation; Standard winch; Reversible winch to lift heavy loads quickly. Standard features: FPLG-4 maximum height forks at the top 1,80 m - load capacity 227 Kg. FPLG-8 maximum height forks at the top 3,06 m - load capacity 181 Kg. FPLG-10 maximum height forks at the top 3,56 m - load capacity 159 Kg. FPLG-12 maximum height forks at the top 4,20 m - load capacity 159 Kg. Height closed (1,2,3):m 1,72 Maximum height of top forks:m 1,80 Maximum height of down forks:m 1,26 Minimum height of down forks:cm 9

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

Il giubbotto ha un design compatto e tattico, offre una protezione balistica su tutta la superficie con un’estensione sovrapposta ai fianchi del corpo, spalle, collo e inguine;flessibile, morbido e consente di aderire agevolmente al corpo delll’operatore, garantendo la protezione del torace, del dorso e dei fianchi. Rapida e facile indossabilità, permette di eseguire tutti i movimenti e di guidare agevolmente veicoli, pilotare aeromobili. Adatto anche per le operazioni in tenuta anti N.B.C.

AVEC SA MOUSSE HR MI FERME, LE REPOSE PIEDS/POUF CINÉO PEUT SERVIR D’ASSISE D’APPOINT. PRATIQUE ET CONFORTABLE! GRACE À LA FABRICATION SUR MESURE, VOUS AVEZ LA POSSIBILITÉ D’ASSORTIR AVEC LE MÊME REVÊTEMENT L’ENSEMBLE DE NOS FAUTEUILS FIXES/MOTORISÉS ET REPOSE PIEDS/POUF. UGS :PPMCTALN POIDS:5 kg DIMENSIONS:45 × 30 × 38 cm

Designed to install virtually any type of Heat / Ultrasonic Style Insert. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HM Manual Insert Driver has been designed to eliminate the dependency on the operator to control these factors. The result is nearly perfect flow of the plastic for optimal retention and performance. The Model HM Manual Insert Driver is simple to operate and easily adjustable. The Model HM installs Inserts ranging in size from M2 - M6 metric threads and #2 - 1/4 unified threads, and the simple up-down adjustment of the machine makes it easy to accommodate various sized plastic components.

Großformatige Lasermaschine. Es unterscheidet sich vom ST-Modell durch das Vorhandensein eines automatischen Hubtisches. Min. letter size for engraving:1,5x1,5 mm Lens:D20 F50.8 Working area:1600 x 1000 Software:RD-Werke Mirrors:D25 Type of working table:Lamellen Power consumption:1200 W Through table:Yes Supported format:KI Laser power:100-120 W Laser durability:6000 h Weight:450 kg

Großformatmaschine mit zwei Schneidköpfen. Min. letter size for engraving:1,5x1,5 mm Lens:D20 F50.8 Working area:1600 x 1000 Software:RD-Werke Mirrors:D25 Type of working table:Lamellen Power consumption:1200 W Through table:Yes Supported format:GIF Laser power:100-120 W Laser durability:6000 h Weight:457 kg

300x300/8 SQUARE “T” MODEL DOUBLE BANANA UMBRELLA with BASE 350x350/8 SQUARE “T” MODEL DOUBLE BANANA UMBRELLA with BASE 300x400/8 RECTANGULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE 300/8 CIRCULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE 350/8 CIRCULAR “T” MODEL DOUBLE BANANA UMBRELLA with BASE

Capteur à câble compact très robuste aux nombreux domaines d'application tels que construction de grues, de plate-formes, stockage, etc. pour mesure linéaire max. de 3000 mm.  Montage simple universel et modifiable. Robuste et compact. Options de montage variables. Mesure linéaire jusqu‘à 3 000 mm. Sortie potentiomètre, tension ou courant. Boîtier zinc moulé sous pression et plastique. Clapets d‘aération verrouillables contre la formation d‘eau de condensation. Forte étanchéité de la sortie de câble. Port connecteur M12.

Capteur à câble universel, longueur de mesure max. de 12 000 mm, conception robuste et guidage de câble précis et sûr ; prêt à l'intégration d'encodeurs les plus divers avec bride standard de 58 mm. Modèle robuste, Montage simple, Mesure linéaire 12000 mm max., Codeur incrémental ou absolu, Combiné avec le codeur rotatif WV58MR, disponible aussi en exécution sécurité, Grande souplesse en raison du choix individuel de codeurs à bride standard 58 mm, Différents types de câbles, Avec technologie PURE MOBILE

The SPIROL Model HP Pneumatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HP Pneumatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HP Pneumatic Heat Insert Driver installs Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads.