Izdelki za plastična 10mm cev (26)

PTFE-fiber with PTFE Impregnation and elastic Viton Tube Core Practical useful application data: max. temperature: +200 °C Characteristics Chemical resistance For clean products and static sealing application Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Temperature: t = -50… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Tank lid, door and lid seal Suitable for Static applications Form of delivery This packing can be manufactured from 14 to 40 mm square as well as in intermediate, inch sizes and special measurements. 14 mm and above on 5 kg spool Special length, pre-cut or die formed rings on request. 1 kg of packing of the following cross-sections corresponds to displayed meter lengths: Size mm["] Meter 14 [9/16"] 3.3 15 2.9 16 [5/8"] 2.5 18 2.0 19 [3/4"] 1.8 20 1.6 22 [7/8"] 1.3 25 [1"] 1.0

Tub de policarbonat de 16x110 / Tub de testare cu capac file - Tub de policarbonat CODUL PRODUSULUI:019 Sterilizat:Autoclave 121 ° Resistant Materii prime:Policarbonat Numărul codului de bare:8682009086432 Număr de catalog:MK.09.432

Konstruktionsrohre, Stahl / Aluminium / Edelstahl, für Rohr-Klemmverbinder Ausführung in Stahl ST verzinkt, blau passiviert ZB Ausführung in Aluminium AL • blank, unbehandelt BL • eloxiert, naturfarben EL Ausführung Edelstahl nichtrostend, 1.4301 NI blank, unbehandelt BL Sägeschnittfläche entgratet blank, d.h. nicht oberflächenbehandelt Artikelnummer:GN 990-AL-V12-100-BL Gewicht:12 d1:- d2:9 l ±0.5:* s1:V 12 s2:9 w1:1.5 w2:1.5

IHB konfektioniert PTFE Glatt- und Wellschläuche

Kleberbeschichtet, flammgeschützt, UV-beständig Material: Kleberbeschichteter Polyolefinschlauch Min. Schrumpftemperatur: 70°C Temperatur zur vollst. Schrumpfung: 110°C Zulassungen: CSA, UL Betriebstemperatur: -55°C bis + 125°C

Tuyau transparent – section de 25 m - La boutique France Infra Rouge

Maßgefertigte PE Tuben • DURCHMESSER: von 19mm bis 50mm • LÄNGE: von 68mm bis 210mm • WEISS oder GEFÄRBT • OFFSET: bis zu 6 Farben • FLEXO: bis zu 6 Farben • SIEBDRUCK: bis zu 6 Farben • FLEXO & SIEBDRUCK: Kombi-Druck bis zu 9 Farben • LACK: glänzend, matt, halbmatt, Soft-Touch, Selektivlack • HOT STAMPING: glänzender oder matter Effekt

Frameless Shower Hardware Shower Stabilizers

BIEGLO offers PAI tubes from different PAI types, Torlon® 4203; 4301; 4275; 4435; 4645; 5030 (30% GF); 7130 (30% CF), where each type is best suitable for a specific application. The unique performance of polyamide-imide (PAI) is the result of being transformed from a thermoplastic to a cross-linked thermoset during an extended curing process. Our PAI is processed by experienced engineers and offeres the best possible values a PAI product can have and it's suitable for many applications as gears, rollers, plasma chamber hardware and wafer contact fixtures.

The Tube T 27 / 144 TE is a plastic tube for effervescent products. The tube can be imprinted or in-mold-labeled (IML), furthermore Sanner offers a wide range of matching caps with desiccant in various colors. The tube is perfect for tablets with a diameter of 25mm.

ZZ-Schalungsrohr (Ø 75, Länge 100 mm)

Precision Ceramics has introduced a new and exciting range of advanced ceramic tubes and insulators ideally suitable for thermocouple protection in high temperature measurement applications. The alumina-based tubes are used throughout many industries to aid monitoring the stability and performance of production processes especially those within hostile and aggressive chemical environments at temperatures up to 1,700°C. They are manufactured to DIN V ENV 12212 and are very strong, organically inert and well proven in a wide field of applications.

No mundo do manuseio de fluidos e engenharia de precisão, a escolha da tubulação pode fazer toda a diferença. Quando você exige desempenho excepcional, confiabilidade e versatilidade, não procure além de nossa tubulação de PEEK de 1/16 de polegada. Projetada com precisão e produzida com materiais de alta qualidade, esta tubulação é a solução perfeita para uma ampla gama de aplicações, desde experimentos laboratoriais até processos industriais.

für z.b. PURLOGIC Schaumpistole Schmalfugenröhrchen * für enge und problematische Spaltmaße (5mm) geeignet * reduziert den Schaumverbrauch durch genaue Mengendosierung * einfache Handhabung durch simples Aufstecken auf die Schaumpistole * flexibel bis zu 90 Grad * geringe Anschaffungskosten * patentiert

zweilagig, fadenverstärkte PVC-Wand, schwarz Einsatztemperatur: 0 °C bis +85 °C Material: - Wand: zweilagig, fadenverstärktes PVC - Spirale: kunststoffummantelte Federstahlspirale Eigenschaften: - gute Öl-, Laugen- und Säurefestigkeit - strömungsoptimiert - UV und ozonfest - sehr flexibel und leicht Einsatz : - Haushalts- und Industriesauger Lieferformen: - Ø 25 bis 70 mm - 15 m/Rolle - Ø 76 bis 160 mm - 10 m/Rolle - Farbe: schwarz Weitere Ausführungen: - Farbe: grau Auf Anfrage: - Kurzlängen - konfektioniert nach Kundenwunsch

Cages are designed to be unaffected by ground movements. There is a 2 mm thick cage leg at every 60 cm and wide legged pads placed under these legs. In addition, the cage system is fixed with steel pulling dies once every 10 legs. The system which gains maximum resistance on this count can be mounted 8 tier without platform, 12 tier without platform.

Armaglass Intotech 225 A reinforcement mesh in alkali-resistant fibreglass weighing 225 g/m2, with a 25 x 25 mm square mesh and thermosetting primer equal to about 10% of total weight. Easy and quick to apply, to handle and to cut. It combines lightness and thinness with excellent mechanical characteristics in the warp and weft. Resistant to atmospheric agents and aggressive environments. Suitable for any substrate and perfectly compatible with both cement- and lime-based mortars. Armaglass Intotech 225 is a mesh used for the reinforcement of high thickness plasters and screeds, with a uniform absorption and redistribution function of mechanical stresses and shrinkage stresses. The mesh therefore performs an important anti-cracking function on plasters and screeds. It is the ideal plaster base for our products based on natural hydraulic lime: Sanatigh, Sanawarme, Caleosana, Sanascreed and for osmotic thickening waterproofing products Osmocem MR and Osmocem RD. To prepare the substrate, carefully follow what is indicated in the technical data sheets of the product with which the Armaglass Intotech 225 mesh is combined. To facilitate collaboration with the support, Armaglass Intotech 225 can be coupled and is perfectly compatible with any type of connector (in fiberglass, resin or metal). Application on masonry: If the use of connectors is envisaged, proceed with the creation of holes of suitable diameter, depending on the selected connection system, arranged according to the design indications. Fix the connectors with anchoring resin (Syntech Profix or alternatively SYNTECH EPOXY 21) or grout based on hydraulic binders (Grout Cable or alternatively Sanafluens). Apply a first layer of mortar (see technical data sheet of the chosen product), lay the Armaglass Intotech 225 mesh on the still fresh mortar, taking care to guarantee at least 10 cm on the overlaps, lay the second layer of mortar. Application on screeds: Apply a first layer of screed (see technical data sheet of the chosen product), lay the Armaglass Intotech 225 mesh partially drowning it on the first layer of still fresh screed, taking care to guarantee at least 10 cm on the overlaps, laying the second layer of screed. Packaging: Roll of 50 m2 UM: €/m2

Cet gaine est un système de conduit isolant, souple et transversalement élastique. Elle peut être utilisée avec une pose en montage apparent ou encastrés dans des installations électriques des bâtiments d'habitation. Gaine ICTA Ø40mm avec tire-fils Gaine annelée Vendu par longueur de 50 mètres

UltraPeel ist eine fototechnische, lösemittel-resistente Folie für die vereinfachte Herstellung von selbstklebenden Sandstrahlschablonen, ideal für Sandstrahlarbeiten in Kombination mit Färbungen.

Silencieux MIDI Réduit le niveau sonore à l'échappement des piINLINE® MIDI.

robolink® connecting tubes d26 Customized assembling (length) Inner contour (anti-twist device) Feedthrough of ropes and pneumatic hoses, cables Corrossion-resistant Light Stable robolink® multi-axis joint robolink® Configurator

12x75 Test Tube / 5 ml / PS Product Code:012PS - 012PP Raw material:Polystyrene - Polypropylene Barcode Number:8682009086142 Catalog Number:NK.01.142

The Tube R229-AWG is a plastic tube for effervescent products with a height of 99mm and a diameter of 26.9mm. The tube can be imprinted, furthermore Sanner offers a wide range of matching caps with desiccant in various colors. The tube is perfect for tablets with a diameter of 25mm.

The Tube R331-AWG is a plastic tube for effervescent products with a height of 138mm and a diameter of 26.9mm. The tube can be imprinted, furthermore Sanner offers a wide range of matching caps with desiccant in various colors. The tube is perfect for tablets with a diameter of 25mm.

100 % PTFE Fiber with special PTFE Dispersion Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Characteristics In applications with high pressure or vacuum, die formed bullrings of S4 (no food approval) are recommended Low coefficient of friction and displays low stem/spindle frictions Long lifetime No ageing Minimized maintenance and readjustments Operating range Pressure [p max]: 25 bar, Velocity [v max]: 2 m/s Pressure [p max]: 250 bar, Velocity [v max]: 1.5 m/s Pressure [p max]: 500 bar Temperature: t = -200… +280 °C pH: 0 - 14 Density: 1.80 g/cm³ Main application Valves Fittings Gate valves Flaps Plunger Door and lid seals Suitable for Pulp and paper industry Chemical industry Pharmaceutical industry Food industry Approvals BAM FDA conformity EN 1935:2004 in...

Special features Standard product range from stock radially and axially pre-tensioned plain bearings Completely free of clearance in unloaded state Material: iglidur® J Maintenance-free and calculable service life iglidur® JVSM, metric d1: iglidur® JVSI, inch d1 [inch]: iglidur® JVFM/JVFI Clearance-free pretensioned bearing, fully clearance-free in unloaded state, material: iglidur® J, maintenance-free and predictable service life iglidur® JVFM/JVFI Special features Standard product range from stock radially and axially pre-tensioned plain bearings Completely free of clearance in unloaded state Material: iglidur® J Maintenance-free and calculable service life When to use it? When a radial and/or axial pretension of bearings is desired When a derattling of the bearing in the unloaded state is required When a clearance-free feel is required When not to use it? When a bearing version with reduced clearance is needed Please contact us When the pretension has to withstand high radial forces When absolute clearance-free feature is required at high loads iglidur® JVSM, metric d1: iglidur® JVSI, inch d1 [inch]: iglidur® JVFM/JVFI Clearance-free pretensioned bearing, fully clearance-free in unloaded state, material: iglidur® J, maintenance-free and predictable service life iglidur® JVFM/JVFI