Izdelki za raztegljiva cev (15)

Bei gepaarten Lagern sollten beide Ringe in einem Arbeitsgang plangeschliffen werden, damit diese die gleiche Breite haben. Gerne bieten wir Ihnen passende Zwischenringe für Ihre spezifische Anwendung an.

Fertigung v Biegsamen Wellen (Seele) 2,1-8,0 mm; auch torsionsarm, für Fahrzeugtechnik, Maschinenbau, Modellbau, Oldtimer, Rohrreinigungstechnik als Arbeitswellen, Verstellwellen, Antriebswellen. Biegsame Wellen Eigene Fertigung von Biegsamen Wellen (Seele) von 2,1-8,0 mm; auch in torsionsarmer Ausführung. Für Bereiche der Fahrzeugtechnik, Maschinenbau, Modellbau, Oldtimer, Jalousiebau, Rohrreinigungstechnik – als Arbeitswellen, Verstellwellen, Antriebswellen, Sitzverstellungswellen.

Abmessungen von 6x1 mm bis 573x10,3 mm | Gewicht von 0,043 kg/m bis 49,162 kg/m Abmessungen von 6x1 mm bis 150x5 mm | Gewicht von 0,043 kg/m bis 6,15 kg/m

Vorgefertigte Doppelrohrbaugruppen aus nahezu allen schweißbaren Stahlgüten, warmfesten und nichtrostenden Stählen sowie Sonderwerkstoffen

Material: Edelstahl; Lotmaterial: Silber; Unsere Dienstleistungen: Rohrbiegen, Hartlöten

Bilanciatori per utensili pneumatici con presa d'aria compressa integrata Oltre ai classici bilanciatori a molla, Carl Stahl Kromer sviluppa bilanciatori per utensili pneumatici alta qualità (bilanciatori a molla per tubi flessibili) con presa d'aria compressa integrata. I bilanciatori tubo aria sono retrattori speciali dotati di prese d'aria compressa integrate. Invece di un cavo d'acciaio, hanno un tubo dell'aria. Come i bilanciatori a molla convenzionali, i bilanciatori tubo aria sono pratici dispositivi di manipolazione che servono a tenere a portata di mano utensili portatili come trapani e cacciaviti pneumatici. I bilanciatori di questa gamma sono particolarmente adatti per utensili ad azionamento pneumatico di varie dimensioni, per i quali l'estensione del cavo è perfettamente armonizzata. Portata::0,4 - 3 kg Estensione tubo: :0,8 m Flusso d'aria: :900 l / min a 6 bar Pressione massima di esercizio::10 bar Diametro del tubo::5 x 8 mm Certificato::GS / DIN 15112 Made in::Germany

Die Verlängerungsröhrchen werden auf den Mischer des ZZ-Brandschutzschaum 2K NE aufgesetzt. Er eignet sich für schwer zugängliche Öffnungen.

This shrink tubing is specially designed for anchorage points (Ø 16 mm) and supports that have been reinforced using a supporting tube (Ø 42 mm). It is available in 3 different lengths (300, 600 and 1200 mm) and can be individually shortened. When you heat the tubing up using a hot air gun it shrinks to fit snugly around your sealant collar and anchor. Extension for ABS LockSeal sealant collars Designed for Ø 16 mm posts Available in 3 different lengths: 300, 600 and 1200 mm Simply shorten the tubing to the required length

Tube Family Material:6082 T6, ASTM A106 Dimension (upto) mm:500-750 Weight (KG):3-5 Special Jobs:Anodic Oxidation

Gleitführungen sind Linearführungen bei denen der Führungswagen und die Schiene nicht über Wälzkörper getrennt werden.

Handle Extension Tube The Handle Tube Extension changes the length of SR preset and adjustable torque wrenches of 600 lbf·ft (≈800 Nm) capacity tools. It provides serious ergonomic advantage for higher torque application. Works with 600 ft·lbf capacity SR adjustable and preset torque wrenches to reduce the effort required to achieve high torques. Installs and locks in place. Create a longer torque wrench by extending the lever length to reduce effort to attain selected torque. Compatible Tools: 810597, 810598, 810600, 810601, 810151, 810153, 810319, 810859, 810860 CAUTIONS: If this Handle Extension is to be used, the tool MUST be calibrated and/or preset with the Handle Extension installed. Failure to do so will result in inaccurate torque. Once the Handle Extension is installed, always apply force at the knurled portion of the Handle Extension when in use. Do not apply force in other locations along the Handle Extension during use, as this may result in inaccurate torque.

Fork extensions are the ideal solution where loads need to be transported that are longer than the fork prongs. Please note The extension must be supported by at least 60% of the existing fork prong. The carrying capacity of the fork extension is dependent on the particular fork. Please pay attention to the carrying capacity and centre of gravity of the forklift truck. Type:SZ-GVG External width [mm]:ca. + 40 Coating [mm]:10 - 12

PFLITSCH offers various hoses to provide comprehensive protection against mechanical and thermal damage to cables, for example where cables are installed in a corrosive environment or where cables run across the floor between a machine and a mobile operating enclosure. The UNI Dicht® system has suitable solutions in metal and plastic for safe connection of hoses to cable glands in these situations. Clampless variants are most suitable e.g. for the food industry, where no contamination or dirt is allowed to build up. These variants have all the advantages of the UNI Dicht® system, including a excellent seal up to IP 68, superior strain relief values, EMC and Ex-compatibility as well as great versatility of application. Also available are cable glands for Smooth hoses Spring-stiffened UL hoses Hoses with external steel braid Availability in sizes from M6 to M120 and Pg 7 to Pg 29.

Standard design; open at bottom The SZGVO is an ideal extension that is very light. As with all forkprotection products, the SZGVO can be outfitted with a secutex buffer pad. The thickness and width of the fork extension are based on prong width, prong thickness and carrying capacity. Type:SZ-GVO External width [mm]:ca. + 40 Coating [mm]:10 - 12

The fork extension offers all the advantages of the secutex coating. Because it is welded, it is especially robust and sturdy as well as noise absorbent and slipresistant. It can be simply pushed onto the prongs and secured with a bolt and cotter pin without tools. Type:SZ-GVOP External width [mm]:ca. + 30 Coating [mm]:10 - 12