Izdelki za raztegljiva cev (7)

Die Verlängerungsröhrchen werden auf den Mischer des ZZ-Brandschutzschaum 2K NE aufgesetzt. Er eignet sich für schwer zugängliche Öffnungen.

Flachovalrohre sind speziell entwickelte Komponenten, die in der Automobilindustrie weit verbreitet sind, insbesondere in Anwendungen, die eine effiziente Wärmeübertragung erfordern. Mit Abmessungen von 12 bis 80 mm und Wanddicken von 0,25 bis 0,6 mm bieten diese Rohre eine optimale Balance zwischen Gewicht und Leistung. Sie sind ideal für den Einsatz in Kühlsystemen und Wärmetauschern, wo sie helfen, die Effizienz zu maximieren und den Energieverbrauch zu minimieren. Die Verwendung von Aluminiumlegierungen sorgt für eine leichte, aber dennoch robuste Struktur, die den Anforderungen moderner Fahrzeuge gerecht wird. Die Fertinger Tubes GmbH ist bekannt für ihre Expertise in der Herstellung von Flachovalrohren, die den höchsten Qualitätsstandards entsprechen. Mit fortschrittlichen Fertigungstechniken stellt das Unternehmen sicher, dass jedes Rohr präzise und konsistent ist, was es zu einer zuverlässigen Wahl für Automobilhersteller macht. Die Fähigkeit, maßgeschneiderte Lösungen anzubieten, die den spezifische

This shrink tubing is specially designed for anchorage points (Ø 16 mm) and supports that have been reinforced using a supporting tube (Ø 42 mm). It is available in 3 different lengths (300, 600 and 1200 mm) and can be individually shortened. When you heat the tubing up using a hot air gun it shrinks to fit snugly around your sealant collar and anchor. Extension for ABS LockSeal sealant collars Designed for Ø 16 mm posts Available in 3 different lengths: 300, 600 and 1200 mm Simply shorten the tubing to the required length

Fork extensions are the ideal solution where loads need to be transported that are longer than the fork prongs. Please note The extension must be supported by at least 60% of the existing fork prong. The carrying capacity of the fork extension is dependent on the particular fork. Please pay attention to the carrying capacity and centre of gravity of the forklift truck. Type:SZ-GVG External width [mm]:ca. + 40 Coating [mm]:10 - 12

PFLITSCH offers various hoses to provide comprehensive protection against mechanical and thermal damage to cables, for example where cables are installed in a corrosive environment or where cables run across the floor between a machine and a mobile operating enclosure. The UNI Dicht® system has suitable solutions in metal and plastic for safe connection of hoses to cable glands in these situations. Clampless variants are most suitable e.g. for the food industry, where no contamination or dirt is allowed to build up. These variants have all the advantages of the UNI Dicht® system, including a excellent seal up to IP 68, superior strain relief values, EMC and Ex-compatibility as well as great versatility of application. Also available are cable glands for Smooth hoses Spring-stiffened UL hoses Hoses with external steel braid Availability in sizes from M6 to M120 and Pg 7 to Pg 29.

Standard design; open at bottom The SZGVO is an ideal extension that is very light. As with all forkprotection products, the SZGVO can be outfitted with a secutex buffer pad. The thickness and width of the fork extension are based on prong width, prong thickness and carrying capacity. Type:SZ-GVO External width [mm]:ca. + 40 Coating [mm]:10 - 12

The fork extension offers all the advantages of the secutex coating. Because it is welded, it is especially robust and sturdy as well as noise absorbent and slipresistant. It can be simply pushed onto the prongs and secured with a bolt and cotter pin without tools. Type:SZ-GVOP External width [mm]:ca. + 30 Coating [mm]:10 - 12