Izdelki za stiskalnice za industrijo (2)

Filter press systems are equipment used in separating solids from liquids in various industrial processes. The system includes a series of filter plates arranged in a stack within a filter press unit. The plates are normally covered with filter cloth or filter medium that will allow the liquid component to pass through while holding back solid particles. During the process of filtration, a slurry or suspension is typically pumped into a filter press, where pressure is applied that squeezes the liquid component through the filter media, leaving solid particles trapped within the filter cakes. Afterwards, these cake solids are discharged from the filter plates, and the clarified liquid is discharged at the end of a filtration process to have efficient separation and dewatering of the solids from the liquid phase.

Wet processing-washing is, in most cases, cleaning and separation of materials by use of water and mechanical forces. It is often followed by the removal of such impurities from raw materials as ores, minerals, sand, and gravels. The process commences by the introduction of the said raw materials in a wash plant and thorough soak with plenty of water. This initial saturation softens and loosens the unwanted materials, making them easier to separate from the valuable base material. Inside the wash plant, zones of high pressure and the whirling impact of paddles and jets alternately whip and beat the mixture, scouring away dirt, clays, silt, and all other contaminants. The continuous movement of water helps to further dislodge these impurities, allowing for a more thorough cleaning.