Izdelki za stojalo za koleso (12)

ABES Range-vélo 452 est un système modulaire de supports vélos pour le raccordement en rangée. Deux resp. trois étiers en tube d’acier cintrés en arceau avec un diamètre de 42,4 mm × 2,5 mm, chevillés sur deux barres plates, qui offrent la possibilité de se raccorder en rangée. Trous pour boulons d’ancrage fournis. Montage À visser (+/- 0 mm). Finition – Acier inoxydable 1.4301 poli en grain 240. En option : électro-polissage/haute brillance. – Acier galvanisé S235 avec revêtement par poudre en coloris RAL standard ou DB 703. – Autres couleurs disponibles contre supplément de prix. – Dimensions de tube, hauteurs et largeurs autres que celles spécifiées sont possibles sur demande et moyennant un supplément. – En option avec barre de genou. Des systèmes de rangée de plus grande peuvent être réalisés avec des « Plaques adaptateurs pour le raccordement en rangée« . Pose:à visser au sol Matériau:en acier galvanisé,en acier inoxydable Marché:pour espace public

ABES Bicycle Stand 450-1 rack row system is a configuration of two or three adjacent bars made of bent steel tube with tube diameter of 42.4 × 2.5 mm, a vertical rear tube run, and with staggered tube ends. Each bar is welded at an angle of 90° (45° on request) to the curved base plate which can be assembled in rows at both ends. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Larger rack row systems can be realized with “Adapter plate for row connection“. Installation:floor-mounted Material:steel, stainless steel Market:for public spaces

ABES Range-vélo 450-1 (multiple) est un système modulaire de supports vélos pour le raccordement en rangée. Deux ou trois supports adjacents en tube d’acier cintré avec un diamètre de 42,4 × 2,5 mm, un tube arrière vertical et des extrémités de tubes décalées. Chaque support est soudé à un angle de 90° (45° sur demande) à la base cintrée, qui offre à ses deux extrémités la possibilité d’un raccordement en rangée. Montage À visser (+/- 0 mm). Finition – Acier inoxydable 1.4301 poli en grain 240. En option : électro-polissage/haute brillance. – Acier galvanisé S235 avec revêtement par poudre en coloris RAL standard ou DB 703. – Autres couleurs disponibles contre supplément de prix. Des systèmes de rangée de plus grande peuvent être réalisés avec des « Plaques adaptateurs pour le raccordement en rangée« . Pose:au sol Matériau:en acier, en acier inoxydable Marché:pour espace public

ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm Installation:Fixed mounted, screw fixing Material:steel, stainless steel Market:for public spaces

ABES Bicycle Stand 452 is a modular rack row system consisting of two or three U-rack steel tube racks with a tube diameter of 42.4 mm × 2.5 mm, bolted onto two flat bars which can be assembled in rows. Holes for ground anchor bolts provided. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Tube dimensions, heights and widths other than specified are available on request and at an additional cost. – Optionally with knee rail. Larger rack row systems can be realized with “Adapter plates for row connection“. Installation:free standing or screw fixed Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 471 is a bike rail with rounded edges made from 60 x 12 mm flat steel. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Option: removable with ground shells Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 471 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 60 x 12 mm – Height above ground: 800 mm – Full height: 1150 mm – Width: 800 mm Installation:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Market:for public spaces

U-rack made from perpendicular steel profiles with an integrated LED bar unterneath the crossbar. Other dimensions are available upon request. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. Overview: Bicycle Stand, stainless steel, galvanised steel or powder coated – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm – LED-bar (approx. 24,5 x 770 mm) – Power supply: 24 V DC – Power input: approx. 6,7 W – Luminous flux: approx. 560 lm – Reflected beam angle: 120° – Light colour: 4000 K – Light transmission: CRI >80 – Protection type: IP 67 – Connection cable: approx. 1 m with IP 67 plug The Connection, including all technical requirements, is delivered by the client and is not included in this package. Mounting:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Options and accessories:integrated LED Market:for public spaces

ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 845 x 683 x 244. – Optional: convex cover plate with a 300 mm diameter. Installation:fixed mounted, removable with ground shell as an option Material:steel, stainless steel Design:modern Market:for public spaces

ABES Anlehnbügel 452 ist eine modulare Fahrradparker-Reihenanlage mit zwei bzw. drei U-förmig gebogenen Stahlrohr-Bügeln mit einem Rohrdurchmesser von 42,4 mm × 2,5 mm, verschraubt auf zwei Flacheisen, die über die Möglichkeit zur Reihenverbindung verfügen. Bohrungen für Bodenankerschrauben vorgesehen. Befestigung Zum Aufschrauben bei +/- 0 mm. Ausführung – Edelstahl 1.4301, auf Korn 240 geschliffen. Optional: elektropoliert. – Stahl S235, feuerverzinkt, alternativ zusätzlich mit Pulverbeschichtung in Standard-RAL-Farben oder DB 703. – Andere Farben auf Wunsch gegen Aufpreis erhältlich. – Auf Wunsch und gegen Aufpreis sind andere Rohrabmessungen, Höhen und Breiten als angegeben möglich. – Optional mit Querholm. Reihenanlagen mit mehr Anlehnbügel können durch die Verkettung meherer 2er- bzw. 3er- Züge und unter Verwendung von Adapterplatten zur Reihenverbindung realisiert werden. Anbringung:zum freien Aufstellen oder Aufdübeln Material:Stahl, Edelstahl Absatzmarkt:für öffentliche Bereiche

ABES Bicycle-Stand 453 is a U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bicycle-Stand 453 overview: – Rectangular tube 50 x 20 mm – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm Installation:Fixed mounted, screw fixing, removable with ground shells Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter Installation:Fixed mounted, removable with ground shells Material:steel, stainless steel Market:for public spaces

ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter Installation:Fixed mounted, removable with ground shells Material:steel, stainless steel Options and accessories:modern design Market:for public spaces