Izdelki za stroji za odrezovanje (1004)

Para sellar el tubo, la etapa previa al cerrado completo del embalaje, proveemos las ruedas de calentamiento, resistencias, aislantes y algunos piñones.

Des coupes portions de tailles et de formes différentes existent en fonction de vos machines.

COUTEAUX INTERVENANT DANS LA COUPE DE L’EMBALLAGE - Avec ou sans revêtement, les lames d’ensacheuse ont différentes dentures selon la coupe à obtenir. Une dent rapportée permet d’avoir une amorce de déchirure. Selon vos machines vous pouvez lier une ensacheuse à une mâchoire pour une coupe «ORBITALE».

Corte De Borde - CUCHILLAS PARA LA TRANSFORMACIÓN DEL CARTÓN ONDULADO MÁQUINA TIPO PLEGADORAS ENC

Pour sceller le TUBE, étape préalable à la fermeture complète de l’emballage, nous fournissons les molettes de chauffe, les résistances, les isolants et certaines pignonneries.

Pour la coupe transversale de vos lingettes, ... nous produisons des lames pour une coupe par cisaillement. Pour la coupe de vos mouchoirs, nous produisons des lames type DCM.

The eurolaser laser cutting machine M-1200 for wood is a compact model with a processing area of 1,330 mm x 1,230 mm (52.3" x 48.4"). Just like all eurolaser laser cutting machines the sealed-off laser technology in connection with exchangeable modular assembly groups reduces the lifecycle costs to a minimum. An investment which pays off! Working area (w x l):1,330 mm x 1,230 mm (52.3" x 48.4") DIMENSIONS (W X L X H):2,730 mm x 2,010 mm x 1,600 mm (107.4" x 79.1" x 62.9") Max. material width:1,642 mm (64.6") Material clearance:15 - 55 mm (without material support) Laser power:60 to 450 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 14.1 m/s² (555"/s²)

La placa es móvil y las cuchillas son fijas. Ofrecemos diferentes tipos de revestimientos. La dimensión de las placas se puede adaptar de acuerdo a las ranuras de corte.

Electromechanical mesh cutting machine. It cuts in two directions thanks to the two kW 3 cutting motors, a kW 0.75 press motor and a kW 0.55 feeding motor. It is equipped with Reinforced framework; Continuous shear cutting unit; Rubber inlaid meshpressing beam.

Le système de découpe laser M-800, d’une surface de travail de 830 x 1330 mm, est parfaitement équipé pour tous les travaux de découpe, gravure et marquage par laser. Un de ses points forts, l’option Shuttle Table (système de table navette), permet de presque doubler sa productivité. Avec ce „petit“ système laser, vous avez tous les atouts en mains.

Electromechanical automatic bar cutting bench with 5 transfer roller tracks and a second additional rebar conveyor. Thanks to the second transfer track, parallel to the cutting unit, cutbars can be placed along the whole length of the roller track optimizing the use. This means that the same roller track can be used to store different orders. Basically, it is as if you had a much greater number of roller tracks allowing a better cutting optimization thus reducing the quantity of scraps. The bar cutting bench "OPTIBAT 5" represents the ideal solution for those working large numbers of smallsized orders and it is especially designed for civil housing. Besides being flexible and fast, its electromechanical technology ensures high accuracy; minimum noise production; reduced power and air consumption; reduced maintenance. Cuts per minute:30 Pulling Speed:115 m/min (380 ft/min) Pulling Speed (Brushless):160 m/min (530 ft/min) Average power consumption:3 kWh

Das Laser Cutter- und Gravur-System L-1200 bietet einzigartige Präzision und Schnittqualität bei höchsten Schnittgeschwindigkeiten, die sich je nach zu bearbeitenden Material durch individuelle Laserleistungen anpassen lassen. Alle eurolaser Cutter-Systeme sind mit Laserleistungen von 60-650 Watt erhältlich. Für Sie bedeutet das anwendungsbezogene Effizienz. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines. Working area (w x l):1,800 mm x 1,230 mm (70.8" x 48.4") DIMENSIONS (W X L X H):3,200 mm x 2,010 mm x 1,600 mm (125.9" x 79.1" x 62.9") Max. material width:2,112 mm (83.1") Material clearance:15 - 55 mm (without material support) Laser power:60 to 650 watt Speed:1 - 1,414mm/s (in steps of 1 mm) Acceleration:max. 14.1 m/s² (555"/s² )

Proponemos distintos de tipos de revestimientos, de acero y tipos de afilado de acuerdo a sus máquinas.

Los estándares existen con dimensiones predefinidas (ver tabla). Podemos fabricar según demanda en el plan de acuerdo a sus necesidades.

Das Laser-Schneid-System 2XL-3200 ist eines der Größten innerhalb der Cutter-Serie. eurolaser bietet damit die Möglichkeit der Bearbeitung auf einer Fläche von 2.740 x 3.200 mm. Dadurch lassen sich großformatige Materialien präzise und filigran schneiden, gravieren und markieren. Durch den berührungslosen Schnitt des Lasers entsteht auch bei dieser Größenordnung keinerlei Materialverzug. Der modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration. Wir analysieren Ihre Bedürfnisse und konfigurieren das Lasersystem individuell für Sie. Sie können auf den eurolaser Lasermaschinen eine Vielzahl von Materialien bearbeiten. Schneiden Sie Kunststoffe, Schaumstoffe, Textilien, Klebefolien und vieles mehr. Arbeitsfläche (BxL)::2.740 mm x 3.200 mm Abmessungen (BxLxH)::4.460 mm x 3.940 mm x 1.600 mm Materialdurchlassbreite::2.820 mm Tischdurchlasshöhe::58 - 80 mm (je nach Materialträger) Laserleistung::60 bis 650 Watt Geschwindigkeit::1 - 1.414 mm/s (in 1 mm Schritten) Beschleunigung::max. 9,1 m/s²

We produce counterparts according to your needs and specifications with or without coating (hard chromium). We can manufacture them in carbide.

Para el corte trasversal de toallitas, elaboramos cuchillas para corte de cizallamiento. Para el corte de pañuelos, elaboramos cuchillas tipo DCM.

The pieces are in bronze or in hardened steel

Automatic double bending machine for bars up to Ø 50 mm (#14). It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging Ejection cylinder pneumatic ejector for shapes and mandrels to remove the tools from the toothed part Operation by means of digital electric servomotors 4 adjustable bending speeds Bending speed:72°/sec Average power consumption:2 kWh

Fast automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 13 mm (#4), equipped with Senso Technology. Single strand:1 Ø 5÷13 mm (#4) Pulling speed:300 m/min (990 ft/min) Average power consumption:8 kWh

Our solution is the RTL (Rotating Tool Lathe), which machines in the opposite way: the tube is fixed and the tool is rotating. It speeds up the set-up process and allows you to machine round workpieces up to OD 323 mm. The most important feature of the RTL series is accuracy. While RTL Z is capable of finishing a workpiece between IT8 and IT10, RTL ZX can achieve even better accuracy that is between IT7 and IT9. Machining range:up to OD 220mm

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 6 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Single strand:1 Ø 2÷6 mm (#3) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

Cage welding machine for the production of cylindrical cages with variable pitch welded spiral wrap; max cage Ø 2000 mm. High productivity and flexibility is guaranteed by the configuration of the machine and by the fully automatic welding unit SAF 3000. With the machine to produce cylindrical poles CM PRO 1600/2000 it is also possible to produce on the machine square or rectangular cages and cages with the bars bent on the end (90 °bends, bottle necks and pointed).

Der Laser Cutter M-800 ist mit einer Bearbeitungsfläche von 1330 x 830 mm für alle Anwendungsmöglichkeiten des Laserschneidens und -gravierens für Holz, MDF oder Sperrholz bestens gerüstet. Ein besonderes Highlight ist das optionale Shuttletisch-System, welches Ihre Produktivität beinahe verdoppelt. So haben Sie auch schon mit einem "kleineren" Laser Cutter alle Trümpfe in der Hand. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.330 mm x 830 mm Abmessungen (BxLxH)::2.730 mm x 1.970 mm x 1.600 mm Materialdurchlassbreite::1.642 mm Tischdurchlasshöhe::15 - 55 mm (ohne Materialträger) Laserleistung::60 bis 450 Watt Geschwindigkeit::1 - 1.414 mm/s (in 1 mm Schritten) Beschleunigung::max. 14,1 m/s²                         

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size textiles. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. Working area (w x l):2,270 mm x 3,200 mm (89.3" x 126") DIMENSIONS (W X L X H):3,990 mm x 3,940 mm x 1,600 mm (157.0" x 155.1" x 62.9") Max. material width:2,350 mm (92.5") Material clearance:58 - 80 mm (according to material support) Laser power:60 to 650 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 9.1 m/s² (358"/s²)

Rotor type wire straightening machine for the production of cuttosize wires up to Ø 12 mm (#3). Driven by digital electric servomotors. Max pulling speed 160 m/ min (525 ft/ min) High speed cutting unit with brushless (less than 0.1 sec) Web Teleassistance Available versions Fixed cut with adjustable backstop length for a maximum cutting precision (± 0.5 mm). Rotating cut system with automatic measurement via encoder for higher productivity (± 0.5 mm/m). Single strand:1 Ø 4÷12 mm (#3) Pulling speed:160 m/min (530 ft/min) Average power consumption:4 kWh

Our 11-roller ACS Series compact system press feeding machines consist of 600 and 1600 coil width, 2 and 10 mm of sheet metal thickness, between 6.000 and 15.000 kilograms of coil weight capacity feeder, straightener and decoiler. 11-Roller Compact Coil Feeder System Components Hydraulic Decoiler Hydraulic Inner Tightening and Unloading Upper Arm Coil Servo Feeder Straightener Straightener Adjustment and Fine Positioning Feature Roller Group and Gear Transmission Feature Distance Detection and Proximity Sensor Feature Die Memory System Multiple External Output Options Press Automation Control Feature Operation with Touchscreen and Remote Connection Support Features Material Width:600 - 1600 mm Material Thickness:2 - 10 mm

Loading and unloading during cutting process - increased system duty Easier accessibility of the pieces produced by moving the material support Increasing efficiency by minimising downtime Easy handling Automatic table shift after cutting process possible System is not encapsulated - Robot assembly possible (24/7 - operation) New material is located on the top shuttle table - thereby no material remaining is falling on the new material. Shuttle Table System automatic (STA) Table shift at the touch of a button Process starts automatically after cutting is finished Time saving by optimised processes Minimising supervision of the laser system Additional manual handling possible Snapping table module in after the shuttle process prevents incorrect handlings Of course, the Shuttle Table System is still available as a mere manual version.

Corte De Solapa Y Contrapartida - CUCHILLAS PARA LA TRANSFORMACIÓN DEL CARTÓN ONDULADO MÁQUINA TIPO PLEGADORAS ENC

Automatic wire straightening machine, with rollers, for the production of cuttosize wires up to Ø 20 mm (#6). Driven by digital electric servomotors. Capacity 2 Ø 16 mm (#5) Max pulling speed 200 m/min (660 ft/min) Straighteners (horizontalsverticals) with electronic adjustment and independent position for the 2 wires Motorized wire change unit (Optional) Prestraightening Feeding Unit (Optional) Web Teleassistance Single strand:1 Ø 8÷20 mm (#6) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:200 m/min (660 ft/min) Average power consumption:30 kWh