Izdelki za stroji za punch (310)

Mobile Überführung für den Inlinebetrieb mit der rotativen Stanzmaschine BSR 550 Servo. Für ein optimales Abgreifen der Stanzprodukte. Ausgerüstet mit getakteten Blasluftdüsen zum Ausbrechen von Innenstanzungen.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. Categories:Punches, Upholstery Tools SKU:N/A

No 250 webbing and canvas pliers are made with a hammer jaw. The hammer acts as a lever when a strong pull is required. Excellent tool for stretching canvas and leather as well as webbing. Vinyl handle and a fully nickel plated finish. Categories:Hand Tools, Pliers&Nippers, Punches, Upholstery Tools

Automatische Schneid-, Stanz-, Loch- und Perforiermaschine für den Inline- oder Solobetrieb. Das mit Abstand meistverkaufte und universellste Modell für den mittleren Leistungsbereich bis 10'500 T/h. Einfache Bedienerführung über Touchscreen, Integrierte Steuerung für Einlauflochung, Erhältlich in zwei Arbeitsbreiten.

[Product Description] D-PRO Series is used to cut copper, graphite, and ceramic parts, and is used for general face milling, profile & plunge milling. It is a diamond-coated End mill that is reinforced the wear resistance and enhanced the tool life. [Product Specification] Flat end mill : D0.5 ~ D12 + Various effective length / total length Ball end mill : D0.2 ~ D12 + Various effective length / total length C/R end mill : D2 ~ D12 + Various effective length / total length [Product Model] Flat : 2DRE, 2DPE, 4DPE Ball : 2DRB, 2DPB C/R : 2DRR, 4DRR [Product Use] * D pro series is pure diamond coated Endmill for cutting Graphite, Reinforced plastics, nonferrous metal etc. * Maximized thickness of coating for improvement of wear-resistance * Wide range of effective length and overall length for various work shape. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

[Product Description] S-PRO series is mainly used for cutting difficult-to-cut materials such as stainless, titanium, nickel and hastelloy in the aerospace field. A deep chip evacuation space of the S-PRO helps to cut difficult-to-cut materials, which facilitates chip evacuation and provides excellent surface finish. [Product Specification] Flat end mill : D1 ~ D20 Ball end mill : D3 ~ D20 C/R end mill : D1 ~ D20 [Product Model] Flat : 4SUE, 4SUEA Ball : 4SUB C/R : 4SUR, 4SURA [Product Use] * The cutting edge type of S pro series is unequal flute and it is suitable for cutting difficult to cut materials like alloly steels, stainless steels, Titianium, Inconel etc. * 4SURA, 4SUEA are specialized to cut Inconel. * Strong wear-resistance by adapting S-pro coating. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

H 1 hand pliers are an ideal machine for easy and portable machine that resembles the pliers in a tool box. The machine is made out of heavy duty castiron, so it will last for years. Another advantage H 1 hand pliers have is the ability to set the 15mm Ring snap which is a heavy duty snap used on tarps, boat covers and banner. Professional grommet setting tools much higher quality than those found at most fabric stores. Package deal comes as a complete kit with everything you need to apply. Package Deal Includes √ H 1 Portable Hand Pliers √ 15 mm Ring Snap Dies √ 1 bag of 15mm Ring snap (100 sets) Weight:5.00 lbs Sku:N/A Categories:H-1 Portable Hand Plier Package Deal, Package Deals

Das Pilotmodul dient zum korrekten Ausrichten/Positionieren des Bandes vor und hinter einem Modul bzw. beim Übergang zum nächsten Modul (z.B. zwischen Stanzen und Schweißen) Auch wird das Band während der Operationen zusätzlich in seiner Lage fixiert. Beispiel: Mit Hilfe von Pilotier-Werkzeugen werden die Kontakte in der richtigen Lage bzw. Ausrichtung auf vorgestanzte Bänder geschweißt. Diese können dann z.B. direkt zur Prototypenherstellung eingesetzt werden. Der Antrieb des Pilotmoduls befindet sich unterhalb. Der Abstand der Antriebsachse zur Grundfläche beträgt 165 mm.

This machine can accommodate every die we manufacture. Simple straightforward design allows even a novice to professionally set grommets, rivets and snaps and Portable design allows you to take it to a job site. Package Deal Includes √ M 3 Grommet Machine √ #8 Sheet Metal Grommet dies with Hole Piercing dies and Teflon board √ 1 bag of #8 Sheet Metal Grommets and Plain Washer (144 pcs of each) Weight:24.50 lbs Sku:N/A Categories:Package Deals, Sheet Metal Grommet Package Deal

[Product Description] X-PRO series is for milling carbon steel, low alloy steel and cast iron. It is optimized for roughing by applying a new shape cutting edge for reducing cutting force and improving wear resistance. [Product Specification] Flat end mill : D3 ~ D16 (2Flute, 4Flute) Roughing end mill : D3 ~ D16 (3Flute, 4Flute) [Product Model] Flat : 2XPE, 4XPE, 4XREV, 4XPEV Roughing : 3XOE, 4XOE [Product Use] * X pro series is suitable for Roughing by chip breaker and to cut HRC below 50. * Strong wear-resistance by adapting X-pro coating. * Special design of cutting edge minimizes fracturing. * Excellent work surface by deep ship pocket. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

·Materialien: Carbonstahl, Legierungsstahl, Die & Molde, Die & Molde Teile - [Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

[Product Description] A-PRO series is available for cutting general-purpose and variety of workpiece materials such as pre-hardened steel, alloy steel, carbon steel, heat-resistant alloy steel, and reinforced plastic (below HRC 50). It is also suitable for using in shrink fit chucks due to its shape design to prevent the breakage of cutting edge. [Product Specification] Flat end mill : D0.4 ~ D20 + Various effective length / total length Ball end mill : D0.4 ~ D20 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2ARE, 2APE, 2AEL, 4APE, 4AEL, 4APL Ball : 2ARB, 2ASB, 2APB C/R : 2ARR, 2ACR, 2ALR, 4ARR, 4ACR, 4ALR [Product Use] * Suitable for various work materials (HRC below 45), pre-hardened steel, steel, carbon steel, mold steel * Strong wear-resistance and minimizing chipping by adapting A-pro coating * Excellent surface roughness of work pieces due to optimized cutting edge Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

·Copper, Graphite and non-ferrous metal ·Special coating to maximize the wear-resistance Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

Appareil solide pour pouvoir perforer votre document avant y mettre l'œillet en plastique.

Scellés et embellir. Les scellés ou plombs à sceller sont emballés dans une boîte pratique avec un couvercle transparant. Contenu: environ 150 plombs à sceller

The Micron TEP 3 machine is the machine that bridges the gap between the hobbyists and professionals. The free standing or bench mounted feature of this machine makes it top of the line choice as its deep frame feature allows a comfortable work space and can easily be transported to the job site. Package Deal Includes √ TEP 3 fastener attaching machine √ #3 L/N 9mm self piercing grommet dies √ 1 bag of #3 L/N 9mm self piercing grommets and washers (500 pcs of each) Package deal comes as a complete kit with everything you need to apply. Weight:21.158 lbs Sku:N/A Categories:Package Deals, TEP-3 and Self-Piercing Grommet Package Deal

10.000 œillets brassées pour le Hang Piccolo 102-00 et le 101-00. Hauteur: 3 mm Adapté pour attacher les actes, mais aussi pour les étiquettes des vêtements. Hauteur:3 mm

Workpiece: Glass Ceramic Type : Lithium Disilicate Flutes : 1F Coating : Diamond Crumb Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

Indentification par plombage. Les pinces à plomber sécurise vos expéditions, évitent les vols et la fraude et permettent le contrôle des installations. La pince à plomber est faite de acier inoxidable nickelé. Longuer de la pince à plomber: 110mm A utiliser pour des plombs d'un diamètre de 8 ou 9 mm. Le bloc de haute et le bloc du bas peuvent être gravés. Dans les plombs les deux gravures seront bien visible et belles. Longuer de la pince à plomber:110mm

Une petite boîte avec 500 œilets en cuivre d'un hauteur de 5 mm de Rexel. Attache 35 feuilles de papier de 80 grammes.

·Materialien: Aluminium, AL60, AL70 ·Optimierte Schneide für Aluminium - [Product Description] AL-PRO series end mill is optimized to cut Aluminium(AL60, AL 70 line). Various cutting length & total length, customized machining is possible. [Product Specification] Flat end mill : D0.5 ~ D25 (1Flute, 2Flute, 2Flute) [Product Model] Flat : 1ALE, 2ALE, 3ALE [Product Use] * End mills for Aluminum, Alloy, non-ferrous and non-metallic materials Brand Name :Hansong M&T Place of origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment term:T/T in advance Delivery:After receipt payment SAMPLE:Available (Charge) HS CODE:8207-70-2000

Osborne arch punches are forged in one piece from the finest special carbon steel in sizes from 1/8” to 21/8” diameter. Larger sizes are made with our properly engineered two piece welded construction. A unique feature of the Osborne arch punch is the inside taper which permits the punchings to clear easily through the barrel. Punches have fully polished barrel. The cutting edge is fully hardened all the way through and properly finished to provide long use trouble free punching. Original and correct design for cutting. Meet government standards. Categories:Punches, Upholstery Tools SKU:N/A

Das SBT Gewindeformmodul kann zum Schneiden und Formen von Gewinden M2 bis M6 eingesetzt werden. Der Vorteil im Vergleich zu herkömmlichen Systemen wie sie zum Beispiel in Pressen eingesetzt werden ist der kurvengesteuerte Antrieb, der mehr Zeit für den Formprozess zulässt. Dies reduziert die Schnittgeschwindigkeit und sorgt auch bei hohen Hubzahlen für eine lange Lebensdauer des Gewindeformers. Der Antrieb des Moduls erfolgt servoelektrisch. Gewinde können von oben und von unten geformt werden. Zum einfachen Wechsel des Gewindeformers kann die Einheit einfach geschwenkt werden. Die Schmierung des Gewindeformers und die Abführung des überschüssigen Schneidöls ist ebenfalls bereits inkludiert.

We develop precision-cut knives for a wide variety of foils. Irrespective of whether the foils are extra thin, unusually thick, viscous or elastic, or whether they are shrink-wrapped, printed, finished, environmentally friendly or else biofoils - we supply the best knives.

·Materialien: Carbonstahl, Legierungsstahl, Die & Molde, Die & Molde Teile - [Product Description] H-PRO series can be used in a wide range from general steel to high-hardness steel, and it is designed for high-hardness and high-speed milling. It is suitable for cutting carbon steel, alloy steel series, molds and mold parts, and is useful for ultra-precision machining by applying high-precision tolerances. [Product Specification] Flat end mill : D0.05 ~ D25 + Various effective length / total length Ball end mill : D0.1 ~ D20 + (same as above) C/R end mill : D0.2 ~ D20 + (same as above) Inner C/R end mill : D0.5 ~ D5.9 + (same as above) High speed milling end mill : D0.8 ~ D12 + (same as above) [Product Model] Flat : 2HRE, 2HPE, 2HLE, 4HRE, 4HPE, 4HLE, 4HHE, 6HPE Ball : 2HRB, 2HSB, 2HPB, 3HPB, 4HPB, C/R : 2HRR, 2HCR, 4HRR, 4HCR, 4HIT Inner C/R : 2IRC, 4IRC [Product Use] H pro series is suitable for High hardened steels (HRC 45~55) and pre-hardened steel. Strong wear-resistance and minimizing chipping by adapting H-pro coating. Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

Continental Area Flat Rate Shipping fee $49.99 This machine can accommodate every die we manufacture. Simple straightforward design allows even a novice to professionally set grommets, rivets and snaps and Portable design allows you to take it to a job site. Package Deal Includes √ M 3 Grommet Machine √ #8 Rolled Rim Grommet dies with Hole Piercing dies and Teflon board √ 1 bag of #8 Rolled Rim Grommets and Washer (144 pcs of each) The Micron M 3 is our favorite manual fastener press. The versatility of this amazing fasteners press is simply unmatched as far as manual fastener presses are concerned. 1. Versatile The Micron M 3 is specifically designed to attach curtain grommets size #12 # 15 and #18. The M 3 does a great job of installing curtain grommets. This is rare for a manual grommet press the size of the M 3. If you are looking for a portable manual grommet press to attach curtain grommets, this is it. Weight:85.00 lbs Sku:N/A Categories:Package Deals, Rolled Rim Grommet Package Deal

·Copper, Graphite and non-ferrous metal ·Special coating to maximize the wear-resistance Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000

[Product Description] R-PRO series is specialized for cutting super-hardened & heat-treated steel (HRC 52 to HRC 72). It has excellent wear resistance and a shape design for increasing machinability. In addition, we have taper end mills that can be customized to customers. [Product Specification] Flat end mill : D0.1 ~ D12 + Various effective length / total length Ball end mill : D0.1 ~ D12 + Various effective length / total length C/R end mill : D1 ~ D12 + Various effective length / total length Taper end mill : D1 ~ D12 + Various effective length / total length [Product Model] Flat : 2RRE, 4RRE, 4RPE, 4RLE Ball : 2RRB, 2RSB, 2RPB, 3RSB C/R : 4RRR, 4RCR, 6RCR Taper: 2RTB, 3RTB, 2RTR, 4RTR [Product Use] * R pro series is suitable for Super hardened steels (HRC 52~70) and pre-hardened steel * Strong wear-resistance and minimizing chipping by adapting R-pro coating.(Si based PVD coating) * Excellent surface roughness of work pieces due to optimized cutting edge design Brand Name:Hansong M&T Place of Origin:South Korea Certification:ISO 9001, ISO 14001, ISO 13485, CE Packaging:Box packing Payment Term:T/T in advance Delivery:After receipt payment Sample:Available (Charge) HS Code:8207-70-2000