Izdelki za stroji za rezanje (539)

Nos machines de ligne de coupe de bobines à longueur ont la capacité de répondre au besoin de couper des tôles entre 600 et 1600 millimètres de largeur, 6.000 et 30.000 kilogrammes de poids. Capacité de charge de bobine:6.000 - 30.000 kg Diamètre intérieur de la bobine:480 – 530 mm Diamètre extérieur de la bobine:1400 mm Largeur du matériau:500 - 1500 mm Épaisseur de matériau:0,3 - 2 mm

The coil-fed laser offers great advantages in coil laser cutting processes with the help of the continuous coil-fed laser cutting system. With the aid of a perfect construction and advanced software of the coil-fed laser machine, we provide our customers with precision, accuracy, and the possibility of rapid production from the coil to the laser cutting system. Advantages of the coil-fed laser cutting machine: • Results with minimal waste • Lower electricity consumption • Reduced labor costs • High production capacity • Low maintenance cost • NO investment in tools required • Maximum cutting flexibility • Clean, precise, and continuous cutting • Cutting bed design according to customer demand • Possibility of special design in coil-fed laser machine Maximum Coil Weight :30 Tons Maximum Coil Width:2.100 mm Maximum Cutting Thickness:According to Demand

Mit unserer 3100 mm langen HNC-Guillotinenschneidemaschine der neuesten Technologie werden DKP-, HRP-, Baustahl-, Edelstahl- und Aluminiumbleche mit einer Dicke von 0,50 mm bis 10 mm mit einer Genauigkeit von ±0,1 mm geschnitten.

Cutting of the desired sizes with a variety of materials is carried out in line guillotine cut.

-RPM selection for different materials with the 2-speed motor -45° right hand to 45° left hand saw positioning, accurate and precise cutting in two directions -Coolant circulation to remove materials' chips and to cool the disc -Adjustable gear according to the size of the material -Comes with a stop rod for repeatable cuts -24 V low voltage system -Emergency stop button -Safety regulations, according to CE Standards -Moving saw protection guard -Motor protection kit -Burr-free cutting -Hassle-free performance

Cutting of steel, dkp, stainless, aluminum, copper, brass and galvanized sheets are performed with plasma cutting machine. Our machines can perform plasma cutting from 1 mm to 35 mm. As Ramazan Aycan Inc., we provide plasma cutting services to cut sheet in desired sizes and thicknesses according to the demands of our customers; we provide you with guaranteed services with our expert staff.

Türkiye'de üretilen Yarı-otomatik ve Tam-otomatik Şerit Testere Makinaları

RYK 420 Radial Saw Machine is designed for the strait or angular cutting operations of the large size of materials made of aluminum and timbers, RYK 420 allows straight and angular cuttings by means of the pivoting and tilting head. Performing of different cutting operations are possible by means of the pivoting and tilting features Powerful cutting operations by means of the 2.2 kW, 3000 r.p.m motor Smooth movement, high precision and great sensitivity provided with gas spring, linear bearings, and ergonomic handle. 2 x pneumatic vertical clamps & extension pieces Cast iron construction of the body that is strong and lasting Robust mechanical construction enables the ease of adjustment for the requested cutting angles. Equipped with a saw blade diameter 420 mm for timber cutting Location points at 15°-22,5°-30°-45°-60°-90° Pivoting range from 45° right to 60° left in finitely adjustable Tilting range from 90° to 45° left

iLaser - Fiber Laser Cutting Machine Ready to Start Machine, laser source, head & control - all connected during transport Compact, Fits in a regular truck, less installation time, less foot print Operator friendly, easy open side covers and for easy maintenance access. Making sure of starting the machine same as factory settings and adjustments. Designed with high precision criteria, rigid body. Power transmission by Rack & Pinion system.

- Two Saws with a diameter of 500 mm. diamond saw and is also a German brand Schaffer. - It is possible to work in aluminum and PVC profiles. MOTOR SERVO - The screen we use is a Mitsubishi brand with a PLC driver - We use Schneider in electrical materials. - We use the Japanese liner Ray and the car. - You can cut any profile length with a long measurement program. Although the machine is 4 meters long, if you want to cut 6 meters, the machine adjusts it. - The machine has an automatic slicing function. - Suitable for optimization programs such as ERKO and ABT. - There are 4 options for a foreign language. - You can connect to the Internet from far away and detect an accident. There is a menu on the screen that shows where the accident is. - Has a lubrication cooling system for the aluminum profile.

Lazer Kesim & Büküm

Станок для резки арматуры / آلة قطع حديد التسليح - HİDROLİK KESME MAKİNELERİ MAKSİMUM GÜÇ VE DAYANIM SAĞLAYACAK ŞEKİLDE TASARLANMIŞTIR. TEK PARÇALI VE ÇELİK DÖKÜM GÖVDE VE MAFSAL. MAKİNELERİMİZ YAYLI SİSTEM İLE GERİ DÖNÜŞÜ HIZLANDIRILMIŞTIR. ÇİFT ETKİLİ HİDROLİK ÜNİTE İLE YAY OLMADAN DA KESİNTİSİZ ÇALIŞMA İMKANI. PİSTON İLE MAFSAL BİRBİRNE PİM İLE BAĞLANMIŞ OLUP KESİNTİSİZ ÇALIŞMA İMKANI. SORUNSUZ YEDEK PARÇA İMKANI.

Possibility to cut double profiles at same time Fully automatic, precise touch screen Unlimited memory program Possibility to cut PVC and Aluminum profiles with two ø450mm diamond saw blades Ability to work with single corner and fast slicing Automatic 45 and 90 degree crossing of both corners Possibility to cut intermediate angles Profile support unit between two corner Optional servo motor system

600 mm Stroklu Manuel Arka Dayama 800 mm Uzunluğunda Cetvelli Gönye Acil Stoplu Ayak Pedalı Ön Sac Tutma kolları Kesim Hattı Aydınlatması Ön,Arka El Ve Ayak Koruma Kafesleri

helva kesme makine imalatı yapılır

Reinforcement Cutting Machine Wtih Diamond Wire

SACFORM Cut to Length Line consists of Decoiler, Servo Feeder with Straightener, Shear System and Stacking Units. With all these equipment, our Line is a feature-complete Turnkey Project for our Customers.

Designed with the power to be able to handle the most demanding fastener attaching jobs. This machine can accommodate every die we manufacture including snaps, rivets and buttons. Features a laser pointer, optional foot pedal and comes standard with our safety system Requires 110 volts of AC power and an air compressor that can accomodate 150 PSI The MC 20 Grommet Attachment Machine is one of the most versatile fastener attaching machines available today. With interchangeable dies, you can use the MC 20 to attach just about any size and style of Grommets available including large size #15 50mm (2 inches) and #18 curtain 65mm curtain grommets as well. You can also use the Micron MC 20 Grommet Attachment Machine to attach Spring Snaps, Ring Snaps, Jean Rivets and Jean Buttons of various sizes and styles. The Micron MC 20 Grommet and Grommet Attachment Machine feature an advanced safety system that prevents the dies from coming down when the operator’s hands are under the dies. Weight:180.00 lbs SKU:N/A Categories:Automatic Machines, Fastener Attaching Machines

Our laser tube cutting service includes all major tube and section profiles – including large tube laser cutting – with specialist profile capabilities accommodated with ease. Continuous investment ensures we can always offer our customers the broadest capabilities, so they remain at the forefront.

Système de ressort à gaz Système d'arrêt absorbant les chocs arrière Coupe à des angles standard et à tous les angles intermédiaires Poignée ergonomique facile à saisir Système de connexion fourche + plateau tournant conçu sur mesure, qui assure une précision d'équerre définie Interrupteur de protection thermique Pinces faciles à utiliser. Peut être incliné dans n'importe quelle direction, serré en un seul mouvement Puissance moteur: 2,2 kW, 3HP, 230V-400V Tailles de scie: D = 400 mm, d = 30-32 mm Vitesse de scie: 3000 tr / min Tailles: 68x90x79 Poids total: 70 2 pièces pinces mécaniques Lame de scie Moteur monophasé Convoyeur Système de ressort mécanique

• Semi-automatic double miter for cutting profiles and solid material in steel and non-ferrous material and an excellent price-performance ratio • Manually swiveling saw frame with hydraulic clamping for optimal • Hydraulic clamping of the horizontal vise • Automatic saw frame raising on the cut end • Double speed motor 1.0/1.3 KW Gearbox • Sensitive cutting pressure regulation function of the material properties • Hydraulic-mechanical belt tension • Tape guide with hard metal pads sheets and rolls • Thermal overload protection and no-volt release • Automatic shut-off after cut end • Automatic belt break protection Driven

Şerit testere tezgahlarında her türlü metal, sert çelik ve paslanmaz malzemelerin kesiminde kullanılır. Kesilen malzemenin cinsi, sertliği, et kalınlığı ve kesim yöntemine göre testerelerin diş formu, diş hatvesi ve kalitesi değişkenlik göstermektedir. Bi-Metal M42 ve M51 olarak iki farklı çelik kalitesi mevcuttur. Diş uçları 67-69 Rc sertlik derecesine sahip testerelerdir.

Nous fabriquons vos produits métalliques sur mesure. Nous découpons, plions et soudons des tôles et des tubes profilés de toutes tailles. Nous proposons également des applications de revêtement en poudre dans notre usine de grande capacité.

ONE Line TWO Methods Coil Fed Shear Blanking & Laser Cutting Line The Blanking Line cuts all your custom blanks direct from the coil with our turnkey solutions, utilising automation for feeding levelling cutting and stacking of all cut parts. Shear Cutting provides rapid cutting of blanks at any size Laser Cutting offers high speed cutting straight lines, trapezoid and any shape blanks for your production requirements

Machine Cut / 300 SFA automatique

The Ellipse Bending Machine bends the ends of curved or non-convex lids, which are used to close the bottom and ceiling of low-pressure or non-pressure, thin-walled, non-cylindrical, metal containers in the industry. There is no hole in the center part of the cover. Ellipse Bending Machine are machines designed for cutting and flanging flat and dished heads for tanks and others. Ellipse Bending Machine is capable of cutting and flanging elliptical, double D, round and any unsymmetrical shape. The Ellipse Bending Machine consists of two Working Heads, the cutting and Flanging Head. Both heads are operated from the same control unit in each head. It uses precise hydraulic tracking to fabricate oval shaped tank heads. Likewise, the Ellipse Bending Machine can produce round shaped tank heads. Ellipse Bending Machine is manufactured as a closed frame with a solid structure. The rotation speed is adjustable.

For futher details, please contact us and visit our website

KROKAN CUTTING LINE FULL INDUSTRIAL PC MOTION CONTROL WITH ELEVEN SERVO MOTORS WORK DETAILS CAPACITY; It varies according to the product type and weight and is approximately 500-600 kg/hour.

Machine Manufacturing Industry, Pressing Machine, 42CrMo4-QT Material, 500 Kilograms

Tente & Branda Sanayi Ekipmanları