Izdelki za visok tlak (41)

AIR COMPRESSOR inverter Driven 150 HP 110 KW 15 bar max. Inverter Driven ABB Direct coupled europan brand 13,20 m3/min at 13 bar. 13,55 m3/min at 12,5 bar 14,66 m3/min at 11 bar 1500 rpm electric motor 110 kw min 5 bar max 15 bar.

Air Operated High Pressure Diaghrapm Pump

Basınç boruları

*1-30 t/h arası buhar üretim kapasitesi *6-16 bar arası işletme basıncı *Sıvı ve gaz yakıtlı *Optimum su-buhar hacmi oranı ile ani buhar çekişlerine uygun *Yanmanın, yanma odasında tamamlanabilmesi için düşük yanma odası yükü (< 1,3 MW/m3) *Yapılan ısıl tasarım sayesinde tam yanma ve düşük NOx emisyonu *Wet-back tasarımı ile ısı transfer yüzeyinden maksimum fayda *Kazan gövdesinin yüksek yoğunluklu izolasyon malzemesi ile kaplanması sayesinde, azaltılmış ışıma ve kazan hazırda bekleme kayıpları %91’e varan kazan verimi (Ekonomizörlü uygulamalarda %95,5’e varan verim) *Kazan üzerinde yürüme platformu uygulaması sayesinde montaj ve müdahale kolaylığı *Opsiyonel olarak su, hava ekonomizörü, kızdırıcı kullanımı

ISO 7866 CERTIFICATED Working pressure:200 ps Testing pressure:300 ps

With professional and modern technology, High Pressure Desiccant Air Dryers with a capacity of up to 300 bar can be produced according to the needs of your production facility. Compressed air may contain various undesirable contaminants such as water vapor, oil, particles and dust. If polluted air comes into contact with equipment in the production process, it causes equipment damage. Features of High Pressure 50Bar Desiccant Air Dryers Standard Accessories: It has electronic control feature. Long-life pneumatic valves of European origin Superior performance active alumina American and Japanese made exhaust air silencers Inlet and outlet air filters Zero air loss water discharge system at the entrance Optional accessories: Dewpoint sensor and Energy saving mode Maximum Working Pressure: 50Bar-300Bar varies depending on the models. Regeneration air loss rates: -40 Dewpoint: 2.7% -70 Dewpoint: 5.4% Our High Pressure Desiccant air dryer models have a 2% air loss rate.

HP200 High Pressure AODD Pumps - AODD Pumps Product Code:#000251 Max. Capacity:260 lpm Intake/Discharge Size:2" (inch) Fluid Discharge Pressure:14 bar Main Body:Aluminium, Cast Iron, Cast Stainless Steel Diaphragms:Neoprene, Buna-N Balls:Neoprene, Buna-N Ball Seats:Neoprene, Buna-N Air Inlet Size:3/4" (inch) Solids - Handling:6mm Suction Depth:6m Operating Pressure Max:7 bar

0.6mm 45° & 100° Fogging Angle 70bar (1015psi) 210gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA60M5SSC-ND

NUMBER MIPT pieceDescription (MIPT) ProductsPRESSUREfunctionalityCOLORMEASUREDTemperature G03131160001STEEL WIRE FOUR FLOORS4SP / EN 856Black3/8 " G03131160002STEEL WIRE FOUR FLOORS4SP / EN 856Black1/2 " G03131160003STEEL WIRE FOUR FLOORS4SP / EN 856Black5/8 "

USAGE AREAS * In marble machines * In the supply of combustion air for gas, diesel burners * In the transfer of residues such as dust, clippings, etc. * In the storage of granules and particles * In blow-drying machines * In textile machines-placket spreading machines * At exhaust metering stations * In extruder machines * Can be used safely in industry for wide purpose

Diaphragm Pressure Reducing Valve DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded (FF) / Type : With union, with gauge (manomater) / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems Nominal Diameter DN:DN15-DN25 Connection Type :Thread Connection:With union, with gauge (manometer)

These flanges sleeve bearings have lubrication fully applied and are appropriate for general-purpose applications like conveyors, machines, and appliances. Ø30mm and above sleeves bearing with flange are manufactured according to your technical drawing dimensions.

Collecting dust Fume/gas elimination Handling fine grained material (marble dust, granule, plastique etc.) At printing houses, different factories such as textile,

The function of a Pressure Switch is to provide a path for an electrical circuit that is triggered at a certain pressure. Example uses are: •Oil pressure warning light in an automobile •Pump controller (turn well pump on and off) •Air compressor control •Industrial process signaling A pressure switch must have a process connection (usually threaded for a pipe or tube) and an electrical contact that is connected to wires or terminals. They may sense rising or falling pressure and most are adjustable, so the contact will engage (or turn on the electrical circuit) at a desired pressure setting. They can be pneumatic (air and gases) or hydraulic (water, oil or fluids) or even strictly mechanical. The internals can be a diaphragm capsule, a small chamber backed by a spring or a bourdon tube. The contact is usually copper points but can also be a mercury (in glass) tip switch. Unlike Pressure Transducers which give an analog electrical signal proportional to the amount of pressure, these

HYDRAULIC QUICK COUPLINGS for water or oil connections

HP300 High Pressure AODD Pumps - AODD Pumps Product Code:#000252 Max. Capacity:445 lpm Intake/Discharge Size:3" (inch) Fluid Discharge Pressure:14 bar Main Body:Aluminium, Cast Iron, Cast Stainless Steel Diaphragms:Neoprene, Buna-N Balls:Neoprene, Buna-N Ball Seats:Neoprene, Buna-N Air Inlet Size:3/4" (inch) Solids - Handling:8mm Suction Depth:6m Operating Pressure Max:7 bar

Misting & Moistening Nozzles Special Production CERTİFİED MATERİAL SS303 NON- DRiP PRODUCTION WiTH MiCROSCOPE HiGH PRESSURE NBR O-RING

0.3mm 45° & 100° Fogging Angle 70bar (1015psi) 105gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA30M5SSC-ND

0.2mm 45° & 100° Fogging Angle 70bar (1015psi) 75gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA20U1SSC-ND

0.2mm 45° & 100° Fogging Angle 70bar (1015psi) 75gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA20U2SSC-ND

0.5mm 45° & 100° Fogging Angle 70bar (1015psi) 190gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA50M5SSC-ND

0.3mm 45° & 100° Fogging Angle 70bar (1015psi) 105gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA30U1SSC-ND

0.4mm 45° & 100° Fogging Angle 70bar (1015psi) 150gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA40M5SSC-ND

0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA70U2SSC-ND

Misting & Moistening Nozzles Special Production CERTİFİED MATERİAL SS303 NON- DRiP PRODUCTION WiTH MiCROSCOPE HiGH PRESSURE NBR O-RING

0.6mm 45° & 100° Fogging Angle 70bar (1015psi) 210gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA60U1SSC-ND

0.6mm 45° & 100° Fogging Angle 70bar (1015psi) 210gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA60U2SSC-ND

0.5mm 45° & 100° Fogging Angle 70bar (1015psi) 190gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA50U1SSC-ND

0.7mm 45° & 100° Fogging Angle 70bar (1015psi) 240gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA70U1SSC-ND

0.5mm 45° & 100° Fogging Angle 70bar (1015psi) 190gr/min Drip Safety System (Anti-Dirp) Stainless 303 (1.4305) SKU:CSA50U2SSC-ND