Rezultati za

Izdelovalec Proizvajalec - Moulded polyurethane parts

37 Podjetja

0 Izdelki

SPANSET SECUTEX GMBH

Nemčija

SpanSet secutex Sicherheitstechnik GmbH was founded in 1982 by Heinz Franke and SpanSet GmbH. secutex, which stands for "secure textile", has become one of the largest manufacturers and processors of polyurethane over the years. The range of products, which initially consisted of polyurethane-coated lifting straps and protective sleeves, covers various areas, for example technical moulded parts for mechanical engineering, roller and roll coating, prong and surface protection. secutex is a highly wear-resistant polyurethane, which was developed for lifting components with sharp edges, for example coils. By constructing our own moulds, we can provide individual solutions and designs. Thanks to continually developing new solutions for coil handling and storage, secutex has nearly become the industry standard both in Germany and internationally. All products are manufactured in Germany and sold either directly or through an international dealer network

Spletišče
BORFLEX SERVICES

Francija

BORFLEX SERVICES, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Guma in umetna masa - predelava. Deluje tudi v panogah Tesnila, Custom elastomer parts, Custom composite parts, Moulded composite parts, Extrudes joints, Moulded rubber parts, Moulded polyurethane parts, Rubber sleeves, Pultruded composite profiles. Sedež podjetja je v kraju St-Étienne-Rouvray, Francija.
PHILIPP KUNSTSTOFFTECHNIK GMBH

Nemčija

PHILIPP KUNSTSTOFFTECHNIK GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Pohištvo za šole. Deluje tudi v panogah Table tops, tables, PUR edges, Polyurethane potting compound, Compact panels, Melamine resin coated chipboard, Plastic materials, Polyurethane moulded parts. Sedež podjetja je v kraju Elsterheide, Nemčija.
TOBY SCHAUM GMBH POLYURETHANVERARBEITUNG

Nemčija

TOBY Schaum, founded in 1960, has been involved in the development of polyurethane moulded parts for series production right from the very start and can currently draw on 50 years of experience. As a result, our company boasts long-established expertise in the realisation of demanding customer projects in just about every industrial sector. We take great interest in supporting the design of moulded parts early on in the planning phase. Get in touch with your enquiry – we would be happy to help! TOBY Schaum produces integrated foam polyurethane moulded parts (semi-hard) in shore hardnesses from approx. 20 Shore 00 up to approx. 90 Shore A and moulded parts from rigid foam (integrated rigid foam and compact material) with densities of approx. 200 kg/m3 to 1100 kg/m3.

Spletišče
INTERNORM KUNSTSTOFFTECHNIK GMBH

Nemčija

As a Grimme Group company, we produce high-quality plastic products in-house: Rollers and roller coatings made of polyurethane plastics, moulded parts and injection-moulded items. Franz Grimme founded the company in 1987 in Damme (South Oldenburg, Germany). With modern and efficient products, we have transformed from a small company into a medium-sized business. Nowadays, we offer a wide range of customer-specific solutions for the international market. We are active in many different fields.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

ZAPP-ZIMMERMANN GMBH

Nemčija

ZAPP-ZIMMERMANN has worked for more than 25 years to offer its customers innovative fire protection systems specific to the areas of cable, pipe and combination partitioning and fire protection joint sealants. Alongside our tried-and-tested range of intumescent moulded parts made from polyurethane fire protection foam, we offer other materials such as silicon and acrylic for structural engineering, tunnel construction, shipbuilding and rail vehicles. Our wide range of fire protection systems includes the correct product for any application, all enabling practical installation and retrofitting. Our systems can be processed quickly and easily without using special tools and the moulded parts can be reused, making them ideal for any stage in the life of your building, regardless of whether they are intended for temporary or permanent use. Our systems are completely free from dust and fibres, making them usable in all areas of construction. You too can benefit from our years of experience and our expertise with structural fire protection.

Spletišče
CHEM-TREND (DEUTSCHLAND) GMBH

Nemčija

Chem-Trend is the most proven partner in the world for release agents, purging compounds, and other related process chemical specialties. Using a customer-centric approach combined with deep research and development, Chem-Trend is dedicated to providing expertise and innovative solutions to improve product quality, production efficiency, waste reduction, and sustainability for its customers now and well into the future. Chem-Trend offers a globally integrated network of experienced, knowledgeable, and insightful production and technical experts, with leading-edge research and development facilities supporting myriad industries and needs. Chem-Trend serves customers through offices in North America, South America, Asia, and Europe and is part of the Freudenberg Group. We are specialised on the development, manufacturing and marketing of: Mould Release Agents Purge Compounds Mould Maintenance Products (Cleaners and Degreasers, Lubricantes, Mould Protectants, Anti-Corrosion Agents) Hydraulic Fluids Plunger Lubricants Moulding of composites Die casting Friction Moulding of Polyurethane (PU Foam) Moulding of Rubber Moulding of Thermoplastics Tyre Paints (Release Agents) for Tyre Manufacturing Tyre Paints (Release Agents) for Tyre Retreading Mould Maintenance Release Agents for Wood-Composites

Spletišče
PROGRESS SILICONES

Francija

PROGRESS SILICONES has been specialised in the manufacture of silicone parts and other elastomers for industry and the medical sector since 1985. PROGRESS SILICONES designs, manufactures and sells silicone parts for the most demanding industries. Sectors, such as: the food industry, nuclear power, cosmetics, aeronautics, pharmaceuticals and biomedical. From single parts to mass production, we create all types of moulded parts, overmoulding, extrusion, co-extrusion, manufacturing and cutting. All our production can be associated with specific marking and packing operations, according to your specifications. We are equipped with 2 Clean Rooms covering 550 m2 classed ISO 7 and ISO 8, adapted to the manufacture of medical and pharmaceutical products. Our quality management system is ISO 9001 and ISO 13485 certified.

Spletišče
SCHAUENBURG INDUSTRIETECHNIK GMBH

Nemčija

Schauenburg Industrietechnik GmbH, based in Nuremberg, is part of the globally active SCHAUENBURG INTERNATIONAL group of companies. The company's services are used by the automotive industry, the construction industry, mechanical engineers and producers in the household appliance sector. As an internationally recognised development and production partner, the company produces plastic and rubber moulded parts from drawings. The portfolio is rounded off by hoses, stamped parts and profiles. One particular advantage of the company is that it produces its own plastic moulded parts. Fully automated 24/7 production guarantees maximum efficiency for small and large-scale production alike. The company specialises in ultra-small moulded parts, measuring less than 10 mm. The variety of products offered is also matched by the scope of the logistics service: Tailored solutions in C-parts management and kanban highlight the importance placed on customer orientation and performing in line with the market. Schauenburg Industrietechnik GmbH is certified to DIN EN ISO 9001 standard

Spletišče
WILHELM-PLASTIC GMBH & CO KG

Nemčija

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Spletišče

LÖSCH GMBH

Nemčija

At Lösch we pride ourselves on rising to every challenge. Nothing motivates us more than an unfinished project still waiting for the perfect solution. We firmly believe that virtually nothing is impossible. It is this belief that has made us industry experts internationally recognised for our quality standards. And that is all down to our workforce, who make Lösch what it is today. Their inventive flair, their engineering prowess and their belief that only the best will do are integral to our everyday corporate culture. Top service calls for a clear focus. And because we know the raw materials, the process and our machinery inside and out, we can keep redefining the boundaries of what is achievable. The underlying principle of everything we do is a clear understanding of our customers and their industry.

Spletišče
BECHTOLD & SOHN GMBH & CO. KG

Nemčija

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Spletišče

GW BATTERIEN GMBH

Nemčija

As an innovative and flexible company, not only do we develop, build and supply battery systems using NiCd, lead and Li-ion technology, we also solve problems for a wide range of applications in the area of railway vehicle batteries and stationary battery systems. In combination with our extensive services, from reconditioning, storage and repairs through to customised leasing offers, we can assist you with our expertise. Our product range is rounded off by special innovations, including those in areas other than battery technology.

Spletišče
REICH MIM GMBH

Nemčija

The expertise of Reich MIM GmbH is the production of metal injection moulded parts, or MIM for short. Reich MIM GmbH is located in Schwarzenberg in the German federal state of Saxony. With over 40 employees and a production area of approx. 2200 m², Reich MIM GmbH is a medium-sized company that is entirely family-owned. MIM technology is suitable for components with a high degree of shape complexity that are to be produced without reworking (undercuts, threads). The main areas of application are automotive and mechanical engineering, measurement and control technology, precision mechanics, the lock and fittings industry, tool technology, medical technology and the field of household appliances.

Spletišče
BIO-RAD - ÉTABLISSEMENT DE GÉMENOS (ANCIENNEMENT PLASTIFRANCE)

Francija

For over 60 years Plastifrance has designed, manufactured and sold plastic components for aeronautics, medicine, the car industry, etc. Our values are industrial excellence, quality service and innovation for parts perfectly suited to your applications. We manufacture plastic components by injection (plastic stops, plastic caps, sleeves and covers) to protect your parts during transport, surface treatment and finish (handles, nozzles …) and wiring management (cable glands, grommets, covers, clips and rivets…).

Spletišče
LOUVRETTE GMBH VERPACKUNG + DESIGN

Nemčija

LOUVRETTE has specialised in the development and production of top-quality plastic packaging solutions for the cosmetics industry for more than half a century.

Spletišče
PLS GMBH

Nemčija

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Spletišče
SAXONIA-FRANKE GMBH & CO. KG

Nemčija

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Spletišče
WALDKRAFT GMBH - BÜRSTEN- UND KUNSTSTOFFTECHNIK

Nemčija

Waldkraft GmbH, founded by Knotz Bürsten GmbH, has been producing wooden and plastic brushes and injection moulding products of all kinds for over six decades to the satisfaction of its customers. As an independent family business, we are characterized by our commitment to our business partners and employees. The high quality standards of our products are at the heart of what we do. The versatility of our products stands us out from the crowd. The benchmark for this is the requirements of our customers. We believe the customer is king. To achieve these goals, it is key that our employees are motivated, highly trained and satisfied. We also feel a responsibility to our environment. Therefore, we use our wood waste as a heating medium for our factory. Furthermore, we use 100% natural energy sources for production.

Spletišče
WINDUS ENTERPRISES INC.

Kitajska

Founded in 1998, WINDUS stands as a global OEM/ODM powerhouse, delivering excellence in castings, metal stampings, fabricated and machined parts, as well as assemblies and testing across diverse industries like Water Treatment, Agriculture, Offshore Oil, Construction, Railroad, and Automotive. Our commitment to quality is evident through our ISO9001 accreditation by TUV in 2003. Implementing an ERP system and Office Automation system has streamlined our business and workflow, significantly boosting internal efficiency and customer responsiveness. Rigorous inspection requirements are meticulously recorded in our Quality Information System, empowering us to measure performance and continually enhance our services. Backed by a seasoned engineering and service team, WINDUS is your 'one-stop service' provider. From design assistance and 3D rapid prototyping to production methods, engineering, and project management, we offer a comprehensive suite of services. Embracing flexible business approaches such as Kanban and Consignment, we cater to your unique needs. Over the years, our unwavering commitment to quality and value has earned us accolades from customers, industry associations, and communities alike.

Spletišče

ACKOR MOULD LIMITED

Kitajska

Founded in Dongguan, China, in 2003, Ackor Mould Limited has dedicated the past two decades to collaborating closely with customers to provide optimal solutions for injection tools and molding products. Our comprehensive services encompass everything from mold manufacturing and injection molding production to final product assembly. Key markets include Japan, the EU, and America, where we've established robust partnerships due to the trust bestowed upon us by our valued customers. With extensive experience spanning various industries such as automotive, medical, electronics, cosmetics, and electrical, Ackor Mould Limited has emerged as a trusted provider. Our proficiency extends beyond injection tooling to services like CNC machining, Silicone Moulding, Rubber Moulding, Metal Pressing, and Plastic Vacuum Forming. From humble beginnings, Ackor Mould Limited has grown substantially by adhering to core principles of quality and competitive pricing. Our commitment is evident in our relentless pursuit of meeting customer requirements and delivering cost-effective products of the highest standards, from the initial inquiry through production to timely delivery. Specializing in injection mold toolmaking for over two decades, Ackor Mould has earned a stellar reputation in the domestic and overseas injection tooling industry. Our expertise is showcased in the diverse sectors we serve, including automotive, medical, electronics, cosmetics, and electrical.

Spletišče
FAE PROJECT

Italija

FAEPROJECT operates internationally as a manufacturer of high quality moulds for highly prestigious names in the footwear and technical sectors. With investment in new technologies and highly specialised technical personnel, FAEPROJECT has made its global mark. The company designs and produces moulds using highly advanced CAD/CAM systems and high quality raw materials and by paying careful attention to detail has achieved excellent results in a short space of time.

Spletišče
N&H TECHNOLOGY GMBH

Nemčija

N&H TECHNOLOGY GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Plastförädling. Deluje tudi v panogah Data transmission cables, specially prepared, Membrane keyboards (complete solutions), Rubber precision moulded parts, Plastic moulded parts, Plastic moulded parts, customer-specific, Plastic Housings, Assemblies, electromechanical, Push buttons (switches), Spring contacts. Sedež podjetja je v kraju Willich, Nemčija.
FONDERIE PENA

Francija

FONDERIE PENA, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Livarne jekla. Deluje tudi v panogah Ulivanje posebnega in visoko kvalitetnega jekla, Posebno jeklo, light alloy foundries, casting of non ferrous metals, Ulivanje posebnega in visoko kvalitetnega jekla, sand casting, aluminium moulding, wood model modelling, bronsgjuteri. Sedež podjetja je v kraju Mérignac, Francija.
LARKIS SP. Z O.O.

Poljska

LARKIS SP. Z O.O., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Tesnila. Deluje tudi v panogah Gumijevi izdelki, Vbrizgavanje gume in umetnih mas, gaskets, profiles, Gaskets and seals, Injection moulding, Gumijevi izdelki, Vbrizgavanje gume in umetnih mas, Moulded rubber parts. Sedež podjetja je v kraju Dobczyce, Poljska.
BUCK SPRITZGUSSTEILE FORMENBAU GMBH

Nemčija

BUCK SPRITZGUSSTEILE FORMENBAU GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vbrizgavanje gume in umetnih mas. Deluje tudi v panogah Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Plastic injection moulded parts, Injection-moulded plastic parts, Plastic parts for the car industry, Plastic parts for electronic equipment, Precision plastic injection moulded parts, Injection-moulded parts, technical, pad printing. Sedež podjetja je v kraju Flachslanden, Nemčija.
SNK PLASTIC

Francija

SNK PLASTIC, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vbrizgavanje gume in umetnih mas. Deluje tudi v panogah Vzdrževanje industrijskih naprav, Plastic injection, injection moulding, Mould making workshop, tool manufacturer, modification of tools, plastic injection tools, Form plastformsprutning, injection mould. Sedež podjetja je v kraju Saint Genix Sur Guiers, Francija.
HA-WI KUNSTSTOFFE GMBH & CO. KG

Nemčija

HA-WI KUNSTSTOFFE GMBH & CO. KG, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Umetne mase - industrijski izdelki. Deluje tudi v panogah Coat racks, Plastic cover caps, Plastic spacers, Injection-moulded plastic parts, Plastic threaded plugs, Plastic edge protection profiles for packaging purposes, Plastic moulded parts, Plastic moulded parts, reinforced with glass fibre, Plastic moulded parts, customer-specific. Sedež podjetja je v kraju Bad Laasphe, Nemčija.
KARL WIDENMANN ARMATURENFABRIK U. METALLGIESSEREI E.K.

Nemčija

KARL WIDENMANN ARMATURENFABRIK U. METALLGIESSEREI E.K., je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Industrijska izdelava pip. Deluje tudi v panogah gjutjärnsdelar, Moulded tin bronze parts, Moulded leaded tin bronze parts, Moulded aluminium multi-alloy bronze parts, Moulded aluminium parts, Moulded iron parts, Moulded bearing metal parts, Shut-off valves, bronze casting. Sedež podjetja je v kraju Heidenheim, Nemčija.
WETEC GMBH

Nemčija

WETEC GMBH, je podjetje tipa Izdelovalec/ Proizvajalec, ki deluje v panogi Vbrizgavanje gume in umetnih mas. Deluje tudi v panogah Plastic assemblies, Plastic precision parts, Plastic injection-moulded parts, Technical-grade plastic parts, Plastics processing, Prototype construction, Injection moulding tools for plastics, injection moulds, Injection-moulded parts made from thermoplastics. Sedež podjetja je v kraju Schweppenhausen, Nemčija.