Rezultati za

Energy system work - Nemčija

9 Podjetja

0 Izdelki

E.I.TEC. GMBH ENERGIE- UND UMWELTTECHNOLOGIE

Nemčija

Founded in 1995 by fellow engineers Frank Grosch and Ralph Wolfrum, the company has come to focus on designing, building, fully installing and commissioning systems for flue gas purification and energy recovery. Our systems are being put to work not only in western and eastern Europe, but also in North America, Asia and Australia. Our technical team is made up of process technology engineers, fluid mechanical engineers and electrical engineers, as well as chemists, physicists, designers, technicians and draughtsmen, all of whom are experts in their field. To ensure our high quality standards are maintained, our systems are subject to continuous checks and interim acceptance tests during production. This results in high levels of availability and safety in our systems.

Spletišče
ELBO-THERM GMBH & CO. KG

Nemčija

Elbo-therm GmbH & Co. KG is one of the largest manufacturers of infrared heating solutions in Germany and is run as a traditional family business. Whether at home, in your spare time, at work, drying out buildings or keeping animals – infrared heating systems from Elbo-therm can be implemented in many different areas. Our decorative infrared radiators save energy and space and are manufactured at our production site. Using our infrared technology as a complete or auxiliary heating system ensures a healthy indoor climate and saves energy. Advantages: Up to 50% lower procurement and heating costs in comparison to other heating systems. The heating output is almost 100% and stays at this level. Maintenance-free, no additional costs required for chimney sweeps or storage of oil and pellets, long service life, saves space, no emissions and does not disturb dust nor dry out the air.

Spletišče
SCHUBERT & SALZER CONTROL SYSTEMS GMBH

Nemčija

Schubert & Salzer Control Systems is a fast-growing high-tech company that develops, manufactures and distributes high-precision control and shut-off valves for industrial use in process engineering methods. Our valves are among the most efficient products on the market in terms of energy consumption, service life and noise generation. Their compact design and high level of control accuracy minimise installation and maintenance work while ensuring a high level of operating and process safety across extremely long service lives. Schubert & Salzer Control Systems GmbH is based in Ingolstadt in south eastern Germany and provides customers with "Made in Germany" high-quality products either directly or via our subsidiaries in Belgium, the Netherlands, Luxembourg, the United Kingdom, France, India and the USA, as well as over 40 Schubert & Salzer partners all around the world.

Spletišče
TRANSFLUID® MASCHINENBAU GMBH

Nemčija

The solution for tubes Many promise solutions. We are the solution. We are transfluid®. The solution for tubes. For this, we are working continually on progress and developing for our customers technologies which are easy to use, sustainable and specifically tailored to the respective requirements. This is not only the standard we set ourselves, it is our motivation for the future. This is because our drive is to realise, together with our customers and for our customers, ideas which give rise to solutions. Industry partners across the globe transfluid® is an internationally preferred partner for the production of pipe machining and bending machines. We have been developing our pipe machining technologies in a customer-centric manner since the company was founded in 1988. For example, we offer tailor-made solutions for applications ranging from plant and mechanical engineering, the automotive & energy industries, shipbuilding and aerospace to the production of medical equipment. With effective planning and an intensive, local consultation service. Going forward together We are the global market leader in machines and systems for controlled rotary forming techniques (incremental). Highly complex forming geometries can be generated with these rotary forming systems. Mechanical working with very tight tolerances, sharp-edged chamfer structure and polished finishes is also possible.

Spletišče
APROVIS

Nemčija

APROVIS – innovation from a single source. APROVIS is an energy company that is active across the world. Our expertise focuses on exhaust gas and gas processing technology. We are experts in single components and system solutions. High quality and reliability have been important to APROVIS since it was founded in 2000. With an export ratio of over 50%, APROVIS is the only provider of system solutions in the CHP market for combustion gases of gas-powered engines and integrated solutions for cogeneration units – with its own products. APROVIS achieves extremely quick delivery times. We also personally support each project from planning to commissioning. We work strictly in accordance with applicable regulations and test standards, with the European Pressure Equipment Directive, ASME or EAC. APROVIS offers a wide range of products: For gas treatment, we offer FriCon gas cooling systems, ActiCo activated carbon filters, gas heat exchangers and compactors. The waste gas technology sector comprises waste gas heat exchangers, steam generators, catalysts (Oxi, three-way and SCR catalysts), diesel particulate filters and chimneys. High-temperature heat exchangers and leaking steam condensers are among special applications. APROVIS ensures a long service life for systems and devices thanks to maintenance, service and targeted spare part management. APROVIS means BETTER PERFORMANCE.

Spletišče

Stran za vaše podjetje

Ali vidite to? Tudi vaši potencialni kupci Pridružite se nam in postanite razpoznavni na europages.

Dodaj moje podjetje

ARCOTEC GMBH

Nemčija

With almost 50 years’ experience, Arcotec GmbH enjoys success as the sole manufacturer of all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). 2019 - With over 45 years’ experience, Arcotec GmbH continues to enjoy success as the sole manufacturer all three methods of physical pretreatment under atmospheric pressure (corona, plasma, flame). Over 15, 000 Arcotec pretreatment systems in use worldwide are a testimony to our consistently high quality and unique know-how in the field of surface pretreatment. 1997 - Introduction of the atmospheric plasma machine (Arcospot®), which distributes high-energy spark discharges. The introduction of the atmospheric plasma machines in particular opened up the market for materials that are difficult to treat at high feed rates. 1991 - Another physical treatment principle, “flame treatment”, was introduced. 1985 - Arcotec GmbH was founded. Pretreatment systems 1976 - Development and deployment of the world’s first plasma machine with open jet electrodes (Arcojet®) for treating plastic moulded parts; this works with electric plasma. Pretreatment systems 1975 - Production of the pretreatment machines begins using high-frequency corona. Pretreatment systems 1974 - Fritz Bloss founded an independent commercial agency.

Spletišče
HEMSTEDT GMBH ELEKTROTECHNISCHE FABRIK

Nemčija

Dieter and Silvi Hemstedt founded their own company with the aim of manufacturing high-quality, specialised heating elements. It was a worthwhile endeavour: A few years later, a total of 20 employees were already working for the company, and sales and space requirements rapidly increased. The product range grew just as fast. Refrigeration technology came along and more and more customers demanded specialised solutions that Hemstedt could implement quickly and precisely. It was this flexibility and high quality that rapidly raised Hemstedt's profile all around the world. More and more frequently, deliveries from the Swabian production site travelled to China, the USA, Russia and many other countries. Today, more than 60 people work in development and manufacturing across a production space of 17, 500 square metres. Therefore, the company today particularly champions the development and manufacturing of energy-efficient heating systems and holistic concepts. These play a significant role in creating production facilities that are not simply climate-neutral, but actually make a positive overall contribution to the environment.

Spletišče
WENZ KUNSTSTOFF GMBH & CO. KG

Nemčija

WENZ Kunststoff GmbH & Co.KG has worked in the field of plastics technology since 1997. As a specialist in heating and cooling technology, materials drying, separating, de-dusting and material conveyance, we offer our customers personal advice on all plastics processing matters. Having taken over representation of the Regloplas temperature control devices forms the basis of our future development. Our desire for innovation leads to the development of new technologies such as the qip® dryer and the Cycletemp® Vario, Impuls and Flow as special temperature control alternatives. With regard to centralised materials supply, we have developed an idea with the coded coupling station, which has become our eighth patent. We currently have the best technologies on the market. Project planning, project development and the construction of conveyor and drying systems for plastics. We not only have a strong relation to the mid-sized sector, we have the flexibility to service companies of every size. With sustainability in mind, we also upgrade old materials handling systems to a new technological level – without any new construction and independent of both age and manufacturer. Our customers enjoy a massive advantage in terms of efficiency, energy, the environment, system integration and costs. Our offer is rounded off with the accessories of our own Talkob and Mouldpro brands – temperature control couplings and hoses, cleaning granulates, flow meters and much more.

Spletišče
EZM EDELSTAHLZIEHEREI MARK GMBH

Nemčija

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Spletišče

Poiščite ponudbe za

Filtri

Rezultati za

Energy system work - Nemčija

Število rezultatov

9 Podjetja