Izdelki za jeklena jekla (305)

ART. 121 CERNIERE LEGGERE A "T" IN ACCIAIO VERNICIATO NERO Confezione: 10 Dimensione(mm): 80 x 1,5

ART. 121 CERNIERE LEGGERE A "T" IN ACCIAIO VERNICIATO NERO Confezione: 10 Dimensione(mm): 200 x 2,0

The Velati’s tilting mixer is completely made of stainless steel and it is formed by a solid basement in which is attached a mixing tank built with a double cradle. In the tank there are two mixing shafts with intersecting paddles of the same shapes and dimensions. The tank capacity varies between 300, 500, 700 or 1.100 lt. Each mixer is available also in the vacuum versions and with CO2 intake. This kind of mixer discharges the product on two or more trolleys by a tank tilting, allowing the complete recovery of raw material and a quick and easy washing of the tank itself. The mixing shaft system with intersecting paddles allows as well a rapid and safe working without smashing the product.

Velati spreading machine, entirely made of stainless steel, is a machinery specifically used in the salami production, designed to pre-mix and separate the components of each type of meat already minced. Thanks to the subdivision and uniform separation between fat and lean parts it is possible to achieve signifcant improvements in the aesthetic quality of the nal product. The spreading machine is fed in continuous by a transporting belt in the upper part, from here the product thanks to the gravity enters into a channel where there are xed and rotating pegs that due to their centrifugal action separate the grain of the ground product in order to make more evident the distinction between lean and fat.This machine allows therefore to create an optical effect of the nal slice in which the homogeneity of the product is visibly recognizable. The Velati vertical spreading machine is available in various versions: one that directly discharges on a conveyor belt to operate in continuous and a version directly applicable to the outlet mouth of the grinder called ag spreading machine.

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 30 x 30 x 0,8

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 60 x 60 x 1,0

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 90 x 50 x 1,5

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 40 x 30 x 0,8

ART. 3500/100 CERNIERE A MOLLA A DOPPIA AZIONE IN ACCIAIO INOSSIDABILE 304 CON VITI Confezione: 2pz Dimensioni (mm): 100 Pollici: 4

ART. 3372 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x55x1,5

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 35 x 22 x 0,8

ART. 3500/75 CERNIERE A MOLLA A DOPPIA AZIONE IN ACCIAIO INOSSIDABILE 304 CON VITI Confezione: 2pz Dimensioni (mm): 75 Pollici: 3

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 70 x 70 x 1,2

ART. 3510/75 CERNIERE A MOLLA A SINGOLA AZIONE IN ACCIAIO INOSSIDABILE 304 CON VITI Confezione: 2pz Dimensioni (mm): 75 Pollici: 3

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 40 x 40 x 0,8

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 80 x 45 x 1,2

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 80 x 80 x 1,2

ART. 3317 CERNIERE QUADRE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 50 x 50 x 1,0

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 70 x 40 x 1,2

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 60 x 35 x 1,0

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 50 x 30 x 1,0

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 30 x 20 x 0,8

ART. 3510/100 CERNIERE A MOLLA A SINGOLA AZIONE IN ACCIAIO INOSSIDABILE 304 CON VITI Confezione: 2pz Dimensioni (mm): 100 Pollici:4

ART. 3370 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x42x1,5

ART. 3323 CERNIERE STRETTE IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione:24 Dimensioni (mm): 100 x 50 x 1,5

ART. 3370 CERNIERE PER NAUTICA IN ACCIAIO INOSSIDABILE 304 PERNO FISSO Confezione: 24pz Dimensioni (mm): 40x70x1,5

Sealpvc SF 240 The SEALPVC SF 250 waterstop is a waterproof profile in PVC that is not hydro-expansive, having a thickness of 24 centimetres and high elasticity. It is used in static joints for horizontal casting (slabs), in concrete structures, resting on the substrate beneath the reinforcement. Given its particular composition, it can be cut with a sharp blade (cutter) and welded with simple heat welding tools, thus making it easier to create connections in the course of work. Waterproofing of static construction joints between: raft foundation and the elevation wall, between two raft foundations, between two elevation walls, between the wall and floor, resting on foundations under the shoring. Bind with iron wire the side flaps of the waterstop to the steel plates provided, in order to position it and secure it in a central position with respect to the casting to be made. Proceed with the casting operations, ensuring it does not bend nor move from the seat identified. 1 m/m: Use Sealpvc SF 240 welding the two edges of different belts head to head using a leister (manual hot air welder). Roll 25 m

Sealpvc RG 250 Bulb The Sealpvc RG 250 Bulb waterstop is a waterproofing PVC profile that is not hydro-expansive, having a thickness of 25 cm with a central and highly elastic bulb. It is used in dynamic joints for horizontal (slabs) or vertical (elevation walls) constructions, in concrete structures, in the central position of the cast. Given its particular composition, it can be cut with a sharp blade (cutter) and welded with simple heat welding tools, thus making it easier to create connections in the course of work. Waterproofing of the dynamic construction joints between: raft foundation and the elevation wall, between two raft foundations, between two elevation walls, between the wall and ceiling. Bind with iron wire the side flaps of the waterstop to the steel plates provided, in order to position it and secure it in a central position with respect to the casting to be made. Proceed with the casting operations, ensuring it does not bend nor move from the seat identified. 1 m/m: Use Sealpvc RG 250 Bulb welding the two edges of different belts head to head using a leister (manual hot air welder). Roll 25 m

Syntech Bioflex Anti-acid coating based on modified epoxy and polysulphide polymers, for the waterproof coating of concrete and steel tanks, tanks and containment tanks. High mechanical and abrasion resistance High adhesion to surfaces Good elasticity High chemical resistance to acids, bases and solvents Very high tenacity and ease of cleaning and maintenance Applicable to heavy thicknesses. Anti-acid waterproofing protective coating for the chemical industry Internal and external lining of tanks, tanks, cisterns, towers, pylons, etc. Waterproof protective coating of digesters of biogas and purification plants Anti-acid protective coating for sewers, secondary tanks, sewer collectors, channels and ducts intended for the containment of waste water and drainage Anti-acid coating of fiberglass tanks for the chemical industry. From 0.40 to 0.50 kg of Syntech Bioflex for each square meter of surface to be covered, applied in two coats. Can 6.1 kg [A] - Can 3.9 kg [B] - Kit: 1 Can 6.1 kg [A] + 1 Can 3.9 kg [B]

Syntech AS 21 Two-component structural adhesive epoxy filler, with soft consistency, thixotropic, easy to spread (malleable paste), for the anchorage of steel connectors, the hermetic closure of through holes in concrete, bonding steel plates on concrete supports, as accessory product for laying road joints, for the reconstruction of wooden heads, crack repair, reconstruction of missing geometries, fixing injectors, reconstruction of joints in concrete floorings etc. Thanks to its soft and thixotropic consistency, Syntech AS 21 has excellent spreadability and is easily applicable even on materials with little or no porous, making it the optimal adhesive for bonding all the elastic bands of our Elastotex line, including the band high elasticity and resistance Elastotex 250 Combi, consisting of a special elastomeric layer in Hypalon. Excellent adhesion also on PVC and plastic materials. Structural reinforcements of structural elements (beams, pillars, etc.) by bonding steel sheets to the concrete. Reconstruction of joints in concrete floorings. Rigid structural bonding (beton plaque) of prefabricated elements and of articles in different building materials: concrete, steel, glass, wood, marble, tiles, stones etc. Anchoring, bonding and attachment of connectors, ties etc. Attachment of elastic straps for waterproofing joints, Elastotex. Reconstruction of wooden heads, crack repair, reconstruction of missing geometries on various supports. The application surfaces must be suitably prepared and adequately resistant: free from dust, grease, soiling, crumbling and non-adhering parts, devoid of wet surface areas. For floorings, moreover, a shot peening or preliminary milling of the surfaces of adhesion is recommended. The metal elements are to be blasted to "almost white metal". Make sure that the environment is well ventilated and wear the personal protective equipment mentioned in the safety data sheet. Add component B to component A, taking care to remove all the material from the packaging and mixing thoroughly with a mixer at a low number of revolutions (or a suitable manual tool), until a homogeneous mixture is obtained, indicated by the uniform colour and the absence of lumps. Apply to the surfaces with the help of spatulas, trowels, etc. Complete the tasks during the useful life of the product. Do not apply in rainy days; do not apply on moist or wet supports; do not apply on pulverised supports; use the product immediately after mixing. Approximately 1.6 kg of Syntech AS 21 for each cubic decimetre of volume to be grouted. Kit: 1 Canister 1 kg [A] + 1 Canister 1 kg [B] - Kit: 1 Can 5 kg [A] + 1 Can 5 kg [B]