Izdelki za ventil (148)

Modular Valve with 4 Check Valves See Catalog: Page 285

4-Way Valve, 5-Ported, LP Pilot Notes minimum pilot pressure is 40 psi See Catalog: Page 273 Uses R-405 is a 4-way, spring-return, fully ported 5-port valve with a low pressure pilot. Pilot pressures as low as 10 psi will actuate the valve. It can perform all 2,3, and 4-way functions. Operates double action cylinders, allows speed control by restr Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Dual Shuttles, Independent See Catalog: Page 285 Uses R-602 is a dual element combination consisting of two completely independent shuttle valves in a single manifold. Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Clippard Minimatic® electronic valves are precision-built utilizing Clippard's unique, patented valving principle. Designed as the next generation of the well-known and trusted original EV Series, the powerful DV Series is compact, quick and built to last—over 1,000,000,000+ cycles! With a solid, compact design and extremely high flow rates, these valves are well-suited for many applications in a variety of different industries including medical, analytical, packaging, manufacturing and more. Features: • High flow rate: 2-Way: up to 100 l/min 3-Way: up to 70 l/min fully ported • Industry standard for leak-free operation • Over 1,000,000,000+ cycles! • Fast response time • Low heat rise/low power • Robust stainless steel "Spider" flat armature spring • Designed to accommodate large flows with more stroke

Water Drawback Valve, M5

4-Way Spring Return, Electronic Valve, 12 VDC See Catalog: Page 284 Uses R-481-12 is a Spring Return 12 VDC Electronic Valve… Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

Clapet Anti-retour À Souder 316 L-epdm

4-Way, 5-Ported, Memory Valve Notes minimum pilot pressure is 20 psi See Catalog: Page 274 Uses R-412 is a 4-way double piloted, fully ported, 2-position valve with a special air-retracted spring that will return the valve to a definite position when the input air is off. This Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Vanne à papillon en fonte ou acier ou inox Manchette élastomère vulcanisée ou remplaçable axe non-éjectable papillon fonte ou inox ou autre... Oreilles lisses ou taraudées. Variante : papillon revêtu halar, uranus B6 Couple press / temp 16 bar/130°C Diamètre nominal 32 à 1000 mm Raccordements suivant DIN ou ANSI Pression nominal sur demande Utilisation Isolement, réglage approximatif pour réseaux industriels Normes F. à f. suivant K1 ou à brides Manoeuver par levier, réducteur manuel, réducteur manuel avec volant à chaine ou motorisation pneumatique ou électrique

Vanne à opercule corps en fonte ductible revêtue intérieur/extérieur rilsan ou époxy agréé alimentaire corps disponible également en acier ou inox Encombrement court ou long, commande par volant ou par carré ou par actionneur pneumatique ou électrique variante : haute pression, raccordement taraudé ou à souder Couple press / temp suivant vos conditions de service Diamètre nominal suivant vos conditions de service Pression nominal suivant vos conditions de service Utilisation Isol. pour eau potable, liquides neutres, fluides chargés

Actuator Roller Arm See Catalog: Page 127

Adjustable Roller Arm See Catalog: Page 127

Subplate for R-932 Sequencing System (1 Valve) Notes 2 3/4 See Catalog: Page 253 Uses Single valve sequence subplate used as an expansion unit. 10-32 port connections provided for signal inputs, step outputs, supply and jumper connections for linking multiple boards together. May serve as final segment of circuit or be inserted between t Additional Information Max PSI 120 PSIG Temperature Range 30-180 F

4-Way Valve, 5-Ported, Spring Return Notes minimum pilot pressure is 40 psi See Catalog: Page 272 Uses R-401 is a 4-way, spring return, pilot operated, fully ported 5-port valve. R-401 is a versatile component in basic logic circuits, and can perform all 2-, 3- and 4-way functions. Operates double acting cylinders, and allows speed control by restricting Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Pulse Valve, G1/8 & M5 Ports

PRAHER PLASTICS est spécialisé dans la production de matériel industriel en matières plastiques et ceci dans différents domaines de compétence. Vannes manuelles et automatisées, tubes, raccords et accessoires pour les systèmes de tuyauterie industrielle. PRAHER PLASTICS propose différents matériaux pour différentes applications, en fonction de la pression de la température et des fluides transportés, nos clients peuvent choisir entre le PVC-C, PVC-U, le PP et PVDF. La courbe pression-température est d’une grande importance, pour le bon choix d’une vanne en plastique. La pression nominale des vannes thermoplastiques est généralement déterminée pour l’eau à une température de 20°C et pour une durée de vie de 25 ans. Il faut tenir compte du fait que plus la température est élevée plus la pression de service maximale diminue, et du fait que non seulement le fluide transporté, mais aussi les conditions ambiantes du système de tuyauterie ont une influence sur la charge de pression.

Water Drawback Valve, #10-32 See Catalog: Page 167 Additional Information Max PSI 100 psig Ports 10-32 Thread Temperature Range 32 to 230 F

Vanne À Boule À Souder

Dual Shuttles, 3-Input See Catalog: Page 285 Uses R-603 is a dual element combination consisting of two shuttle valves which are interconnected into a subcircuit. It provides a 3-input Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

3-Way Valve, 2-Position Notes minimum pressure is 20 psi See Catalog: Page 261 Uses R-302 is a 2- position, 3-way, double-piloted, fully-ported valve. It can be used normally - OPEN, normally-CLOSED, as a 2- position diverter, as a 2- position selector, or as a 2- way valve by plugging the exhaust ports. Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Rob. À Boule 2 Pieces Avec Platine Iso Inox 316 Pn 63 + Actionneur Pneumatique Dimensions:1/2’’ à 3’’ Raccordement:Taraudé BSP Températures Fluide:-10° C / + 180° C Températures Ambiante:-20° C / + 80° C Pression:63 bar à 20° C Air comprimé moteur:min 1bar / max 8 bar Motorisation:Double et simple effet Homologation:ATEX Zones 1, 2, 21 et 22 Matière:Acier - Inox

4-Way Spring Return, Electronic Valve, 24 VDC See Catalog: Page 284 Uses R-481-24 Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

Flow Control & Volume See Catalog: Page 285 Uses R-502 is an adjustable flow control designed to meter Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Vanne Papillon Sandwich Inox Poli

Vanne Papillon À Souder Inox Poli

3-Way Valve, Spring Return Notes minimum pressure is 20 psi See Catalog: Page 261 Uses R-301 is a 3- way ,spring return, fully ported, piloted valve. It can be used normally-OPEN, normally- CLOSED, as a diverter or as a selector. It can also be used as a 2-way valve by plugging the exhaust ports. Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Robinet à boisseau sphérique, Raccordement par brides suivant DIN ou ANSI ou taraudé f/f ou taraudé/fileté f/m Encombrement court ou long corps en laiton ou acier carbone ou fonte ou inox Passage intégral Boule laiton ou inox siège PTFE pur ou renforcé ou NRG ou PEEK ou autres Anti-statique sécurité feu Variante : 3 voies, tout inox 316, passage réduit Couple press / temp suivant vos conditions de service Diamètre nominal DN 15 à DN 300 Raccordements Brides PN 16/25/40 ANSI 150/300/600 Pression nominal PN 16-40, Série 150-600 Ibs ou autres Utilisation Isolement tout ou rien, pour résaux industriels, pétrochimie Normes DIN, ANSI Manoeuver par levier, réducteur manuel, actionneur pneumatique ou électrique

Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 30 psig See Catalog: Page 168

The Clippard NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Features: • Small, compact design • Hygienic and easy to clean (replace tubes) • Low power consumption • High cycle life • Can handle whole blood and particulate matter • Unobstructed flow path • Each valve comes with 12" of silicone tubing • Variety of tubing sizes available • Tubing is easily replaceable Available in 2-Way Normally-Open or Normally- Closed or 3-Way ( one tube N.O. and one tube N.C.) configurations

12 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189