Izdelki za ventil (109)

Vanne À Boule À Souder

Dual Shuttles, 3-Input See Catalog: Page 285 Uses R-603 is a dual element combination consisting of two shuttle valves which are interconnected into a subcircuit. It provides a 3-input Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

3-Way Valve, 2-Position Notes minimum pressure is 20 psi See Catalog: Page 261 Uses R-302 is a 2- position, 3-way, double-piloted, fully-ported valve. It can be used normally - OPEN, normally-CLOSED, as a 2- position diverter, as a 2- position selector, or as a 2- way valve by plugging the exhaust ports. Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Rob. À Boule 2 Pieces Avec Platine Iso Inox 316 Pn 63 + Actionneur Pneumatique Dimensions:1/2’’ à 3’’ Raccordement:Taraudé BSP Températures Fluide:-10° C / + 180° C Températures Ambiante:-20° C / + 80° C Pression:63 bar à 20° C Air comprimé moteur:min 1bar / max 8 bar Motorisation:Double et simple effet Homologation:ATEX Zones 1, 2, 21 et 22 Matière:Acier - Inox

4-Way Spring Return, Electronic Valve, 24 VDC See Catalog: Page 284 Uses R-481-24 Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

Flow Control & Volume See Catalog: Page 285 Uses R-502 is an adjustable flow control designed to meter Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Vanne Papillon Sandwich Inox Poli

Vanne Papillon À Souder Inox Poli

3-Way Valve, Spring Return Notes minimum pressure is 20 psi See Catalog: Page 261 Uses R-301 is a 3- way ,spring return, fully ported, piloted valve. It can be used normally-OPEN, normally- CLOSED, as a diverter or as a selector. It can also be used as a 2-way valve by plugging the exhaust ports. Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Pressure Gauge, Stud Mount, 1/4” NPT, 0 to 30 psig See Catalog: Page 168

The Clippard NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid. Energizing the solenoid retracts or attracts the plunger, which opens or closes the tube. De-energizing the solenoid will allow the plunger to return to its original state. Features: • Small, compact design • Hygienic and easy to clean (replace tubes) • Low power consumption • High cycle life • Can handle whole blood and particulate matter • Unobstructed flow path • Each valve comes with 12" of silicone tubing • Variety of tubing sizes available • Tubing is easily replaceable Available in 2-Way Normally-Open or Normally- Closed or 3-Way ( one tube N.O. and one tube N.C.) configurations

12 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189

3-Way Multiple Pilot, Spring Return Valve Notes minimum pilot pressure is 40 psi See Catalog: Page 263 Uses R-311 is a 3-way , spring retun, fully ported valve with four pilots. Any one of the four pilots will actuate the valve. Actuating more then one pilot has no additional effect. Pilot signals must be absent at all four pilots t release the valve. The v Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Clippard's EFB series electronic fill and bleed circuits are a combination of Clippard pneumatic valve components used to inflate a volume or apparatus in one controllable function, and to release or vent pressure in a second controllable function. Fill and bleed circuits are commonly used in many applications where a particular pressure, firmness, or position can be controlled with the addition or venting of pressure. • Compact, robust design • Extremely fast response • Exceptionally long life • Multiple flow and pressure options • Variety of power and connection options • RoHS compliant Read More about the EFB Series Configure & View Products

Clapet Anti-retour À Disque Inox Toutes Positions Pn 40 Dimensions:DN 15 au DN 100 Raccordement:Entre brides ISO PN 10/16/25/40 Température Mini:– 20°C Température Max:+ 200°C Pression Maxi:40 Bars Caractéristiques:Clapet à disque - Toutes positions - Etanchéité métal/métal Matière:Acier Inox

Clapet Anti-retour Vr 316 Dimensions:DN 3/8’’au 3’’ Raccordement:Femelle-Femelle BSP Température Mini:– 20°C Température Max:+ 140°C Pression Maxi:16 Bars Pression d’ouverture:0,1 bar Caractéristiques:Toutes positions - Inox poli miroir Matière:Acier Inox - PTFE

Robinet À Boule Monobloc Inox 316 Pn 40 Dimensions:DN 1/4“ au 2“ Raccordement:Taraudé BSP Température Mini:-20°C Température Max:+ 180°C Pression Maxi:40 Bars Caractéristiques:Axe inéjectable - Poignée cadenassable - Modèle monobloc Matière:Acier inox

Pressure Gauge, Stud Mount, 1/8” NPT, 0 to 60 psig See Catalog: Page 168

Fluidamp Valve, 3-Way, Metric

Clippard ES Series Valves The compact ES valve, like Clippard EV and ET valves, converts low voltage, low current signals into high pressure (0 to 105 psig) pneumatic outputs, utilizing a unique, patented valving principle. Since there are no sliding parts, and complete poppet travel is only 0.007”, low power consumption and exceptionally long life are assured with this design. No flow is required for cooling because the compact ES is cool, as well as quiet, in operation. The compact nature of design makes this valve well suited to a wide range of applications in biomedical, environmental test equipment, textile machines, packaging machinery, computerized industrial automation, and portable systems. • Close mounting - 7/8” on center • Overall height less than 1” • Easy to mount on manifold with two #4-40 screws • Geometric design • Polymer housing - Zytel ST 801® super tough • TE Connectivity-style pin connection or 18” wire leads • Flow up to 0.6 scfm (17 l/min) As in the case...

4-Way, 5-Ported, Memory Valve Notes minimum pilot pressure is 40 psi See Catalog: Page 273 Uses R-410 is a 4-way, fully ported valve with a special air retracted spring return that will return the valve to a definite position when there is no signal at ports 5 and 4. This Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi Temperature Range 30 to 230 F

Water Drawback Valve, R1/8

Flow Control & Volume See Catalog: Page 285 Uses R-501 is an adjustable flow control designed to meter Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Pulse Valve See Catalog: Page 286 Uses R-711 is a 3-way, normally-OPEN, self-piloted valve that closes shortly after being pressurized and remains closed until signal pressure is exhausted. It converts a continuous input signal into a single pulse of approximately 50 milliseconds. Port 7 is Additional Information Max PSI 150 psi Temperature Range 30 to 230 F

Replacement Button for PB-1, Green

4-Way 2-Position, Electronic Valve, 12 VDC See Catalog: Page 284 Uses R-482-12 Additional Information Air Flow 10 SCFM @ 100 psig Max PSI 150 psi

High Purity Ball Valve Trio/f/316l/iso/od-usp Connection:ASME BPE Seats & Seals:FDA 21CFR 177 / USP23 class VI compliant Temperature rating:– 57° C -180° C Pressure rating:1/2’’ - 2’’ = PN 63 Surface finish:Mechanical polished 0.5 µm Certificate:Avalaible with 3.1 certificate

Clippard - Functional Simplicity The design of Clippard electronic valves is a deceptively simple arrangement with a minimum of operating parts, and remarkably straight forward low power operation. • The Clippard “spider” is the only moving part and its motion to operate the valve is a mere 0.007” travel. • Low voltage D.C. inputs, signals from simple manual switching up to computer directed systems, move the spider in extremely fast response time . . . 5 to 10 milliseconds. • The unit uses extremely low power (0.67 watts at the rated voltage) and is cool running. The valves are light in weight, compact in physical size and mount easily in space-saving packages. The complete line of EC, EV, ET and EW electronic valves are available with two mounting options. Standard base models have two 6-32 threaded, 7/32” deep mounting holes. Manifold models are equipped with a bottom stud, 5/32” long with #10-32 thread, which fits Clippard standard and special manifolds, accessory valves...

All of the benefits of Clippard quality and reliability are now available in these 10mm and 15mm valves. Offered in both Normally-Open or Normally-Closed models, these 2-way and 3-way valves are perfect for small areas where compact electronically-controlled pneumatics are needed. This series has a high strength, engineered light-weight glass filled nylon body, along with stainless steel, copper and Nitrile, making it suitable for a broad range of applications. With exceptional life and reliability, this is the perfect sub-miniature valve for tomorrow's needs in a wide variety of industries. Features: • 2-Way or 3-Way Operation • Detachable Coil and Body • Variety of Circuit Features • Manifold Options Available • RoHS Compliant • Multiple connectors—snap-in plugs, wire leads, custom plugs, DIN • Available LED for confirmation of operation • Highly visible manual override provides valve actuation without power • High durability and corrosion-resistant glass filled nylon...

24 VDC Electronic Fluidamp Valve See Catalog: Page 173, Page 189