Izdelki za ventil (10)

Ball valve for desalination, offshore oil and gas industry, pulp and paper and chemical industry. Suitable for reverse osmosis, geothermal water, Sulphuric acid, Nitric acid, Saliferous fluids, hydroxides and other liquids and gases without mechanical impurities.

Double ball valve and Double Block and Bleed (DBB) to ensure positive isolation of both sides of the valve with a bubble-tight seal and reducing fugitive emissions risks. • DN 10 – DN 100 • PN 16 – PN 250 • NPS ½″ – NPS 4″ • Class 150 – Class 1500

Suitable for liquids and gases with mechanical impurities – solid particles with sizes not exceeding 0,5 mm (e.g. water, steam, gas, oil, crude oil, acid, alkali etc.). • DN 10 – DN 150 • PN 16 – PN 250 • NPS ½″ – NPS 6″ • Class 150 – Class 1500

Stainless steel ball valve used for application with liquid Nitrogen (−196°C), liquefied natural gas LNG (−162°C) and other liquefied gases at very low temperatures. Valves are degreased, cleaned and packaged prior to shipping. • DN 10 – DN 100 • PN 16 – PN 100 • NPS ½″ – NPS 4″ • Class 150 – Class 600

Ball valves for natural gas and crude oil, petrochemical industry, chemicals, heat transfer and distribution, power engineering, waterworks and cryogenic applications. • robust design with floating ball • for temperatures from −196 °C to +500 °C • with soft or metal seats • double or lockable • with heating jacket • direct or three-way • special materials • customized solutions DN 10 - DN 200 PN 16 - PN 250 NPS 3/8" - 8" Class 150 - Class 1500

Ball valve intended for Sulphur or bitumen service – the heating maintains the fluid liquid to operate the valve. Suitable for all fluids and substances that are solid at ambient temperature and it is necessary to warm them up continuously. This valve has a double shell. • DN 10 – DN 200 • PN 16 – PN 250 • NPS ½″ – NPS 8″ • Class 150 – Class 1500

Unidirectional valve used for temperatures from −60°C to +550°C, pressures up to PN 400 and designed to prevent from reverse flow of the service fluid. • DN 50 – DN 400 • PN 16 – PN 400

Three-way ball valve designed to redirect or shut the service fluid flow. Various configurations and materials are available. • DN 10 – DN 150 • PN 16 – PN 250 • NPS ½″ – NPS 6″ • Class 150 – Class 1500

Ball valve for high temperatures up to +500°C designed to redirect the service fluid flow. Suitable for steam, oil, water, gas, heat transfer fluids and other liquids and gases without mechanical impurities. • DN 10 – DN 100 • PN 16 – PN 160 • NPS ½″ – NPS 4″ • Class 150 – Class 900

Ball valve for high temperatures up to +500°C suitable for steam, oil, water, gas, heat transfer fluids and other liquids and gases without mechanical impurities. • DN 10 – DN 100 • PN 16 – PN 160 • NPS ½″ – NPS 4″ • Class 150 – Class 900