Izdelki za ventil (213)

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:1.0 bar Type of pneumatic connection:M5  Pressure range:0 - 10 bar Ventilation:with secondary exhaust  Medium:non-aggressive media  Returning mechanism:spring Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Function:3/2-way Bistable  Pressure range:0 - 10 bar Nominal orifice:0.4 mm Type of pneumatic connection:Flange  Kv-value:0.09 l/min Size:10 mm Actuation type:electrically actuated  Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1 W Nominal voltage:24 V DC Nominal current:153 mA Returning mechanism:Spring  Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

Kendrion has developed a high-quality range of non-return valves for applications requiring non-return and check functions. The shuttle valve or double check valve, respectively, realizes the logical OR function in pneumatic circuits. Pressure range:0 - 8 bar Nominal orifice:2 mm Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5  Valve type:Check valves and flow regulators  Ambient temperature:-10 ... +70 °C Materials:Housing: Al, seal: NBR 

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:6.2 bar Type of pneumatic connection:NPTF 1/8"  Pressure range:0 - 10 bar Medium:non-aggressive media  Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:1.0 bar Type of pneumatic connection:M5  Pressure range:0 - 10 bar Medium:non-aggressive media  Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. A rotary knob is used to set the pressure level. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. These pressure regulators are built with a very robust brass housing. These pressure regulators can be connected by G1/8 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:8.0 bar Type of pneumatic connection:G1/8  Pressure range:0 - 10 bar Medium:non-aggressive media  Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced 

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. Connection is done by 1/8“ NPTF inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:0.5 bar Type of pneumatic connection:NPTF 1/8"  Pressure range:0 - 6 bar Ventilation:with secondary exhaust  Medium:non-aggressive media  Returning mechanism:spring Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced 

10 mm width, three different electrical connection possibilities. Optionally with manual override operation. Function:3/2-way NC  Pressure range:0 - 10 bar Nominal orifice:0.4 mm Type of pneumatic connection:Flange Kv-value:0.09 l/min Size:10 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Wire  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1 W Nominal voltage:24 V DC Nominal current:153 mA Returning mechanism:Spring  Protection class:IP65  Ambient temperature:-10 ... +50 °C Valve type:Poppet valve  Materials:Base: PBT, seal: NBR  Actuation:directly controlled 

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The use of water can be realized with pressure regulator versions without bleeder ports. These pressure regulators are built with a very robust brass housing. The pneumatic connection is done by M5 inner thread. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:5.0 bar Type of pneumatic connection:M5  Pressure range:0 - 10 bar Ventilation:with secondary exhaust  Medium:non-aggressive media  Returning mechanism:spring Ambient temperature:0 ... +60 °C Materials:Housing: brass galvanized, nickel-plated / plastic, seal: NBR, fabric-reinforced 

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted. Function:2/2 way NC  Pressure range:0 - 8.0 bar Nominal orifice:5.0 mm Type of pneumatic connection:1/4" Push-in  Size:32 mm Actuation type:electrically actuated Duty cycle:25 % ED Type of electric connection:Lead wire with spade terminals  Medium:Water, syrup concentrates and filtered (5 µm), lubricated and non lubricated air Nominal power:18.0 W Nominal voltage:24 V DC Nominal current:750 mA Returning mechanism:Spring  Ambient temperature:0 … + 55 °C Materials:Housing: PA, Sealing: EPDM 

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted. Function:3/2 way NC Pressure range:-0.9 - 3.5 bar Nominal orifice:3.5 mm Type of pneumatic connection:Push-in for 6 mm tube  Kv-value:3.5 l/min Size:22 mm Actuation type:electrically actuated  Duty cycle:100 % ED Medium:Water and filtered (5 µm), lubricated and non lubricated air  Nominal power:4.6 W Nominal voltage:24 V DC Nominal current:250 mA Returning mechanism:Spring  Protection class:IP65 (with plug-in socket and occupied pneumatic connections or leads)  Ambient temperature:0 … + 55 °C Valve type:Poppet valve  Materials:Housing: PPSU, sealing: either EPDM, NBR or FKM Actuation:directly controlled 

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 2/2 way NC or 3/2 way NO/NC, also available as low watt version and with nominal orifice of 0.5, 1 or 1.5 mm. For plug-in sockets, current indication and erasing diode please see valve accessories. Function:3/2-way Bistable  Pressure range:0 - 8 bar Nominal orifice:1.0 mm Type of pneumatic connection:M5  Kv-value:0.45 l/min Size:16 mm Duty cycle:100 % ED Type of electric connection:Plug-in socket  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:5.5 W Nominal voltage:24V AC Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

The fluid isolation valves with their chemical resistance, compact size and high flow rates are suitable for many applications. On request other sealing materials like EPDM or FKM can be used. Other technical data like electrical connections or the operating pressure range can be adapted. Function:3/2 way NC  Pressure range:-0.9 - 3.5 bar Nominal orifice:3.5 mm Type of pneumatic connection:Flange  Kv-value:3.5 l/min Size:22 mm Duty cycle:100 % ED Medium:Water and filtered (5 µm), lubricated and non lubricated air  Nominal power:4.6 W Nominal voltage:24 V DC Nominal current:250 mA Returning mechanism:Spring  Ambient temperature:0 … + 55 °C Materials:Housing: PPSU, sealing: either EPDM, NBR or FKM  Valve type:Poppet valve  Actuation:directly controlled 

These valves can be supplied in a wide variety of standard versions, e.g.: in three different base shapes (standard, flange and screw-in base), with connection for plug-in socket prefabricated or with flying leads, as 2/2 way NC or 3/2 way NO/NC, also available as low watt version and with nominal orifice of 0.5, 1 or 1.5 mm. For plug-in sockets, current indication and erasing diode please see valve accessories. Function:3/2-way Bistable  Pressure range:0 - 8 bar Nominal orifice:0.5 mm Type of pneumatic connection:Flange  Kv-value:0.12 l/min Size:16 mm Actuation type:electrically actuated  Duty cycle:100 % ED Type of electric connection:Wire  Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:1.8 W Nominal voltage:24 V DC Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

Wir halten ein großes Sortiment an doppelt entsperrbaren Rückschlagventilen vor, in unterschiedlichen Varianten.

10 mm width, bistable latching solenoid valve or bistable 3/2-way solenoid valve which require only a short electrical power pulse to change the state. On request other sealing materials like EPDM or FKM are possible. Function:3/2-way Bistable  Pressure range:0 - 10 bar Nominal orifice:0.5 mm Type of pneumatic connection:Flange  Kv-value:0.11 l/min Size:10 mm Duty cycle:100 % ED Medium:Filtered (5 µm), lubricated and non lubricated air  Nominal power:2.9 W Nominal voltage:24 V DC Ambient temperature:-10 ... +50 °C Materials:Base: PBT, seal: NBR 

Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. The one-way restrictor with fixed orifice is used where a reduction to low and constant flow values is required. There are different standard orifices available. Pressure range:0.5 - 8 bar Nominal orifice:0.40 mm Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5 Valve type:Check valves and flow regulators  Ambient temperature:-10 ... +70 °C Materials:Housing: brass, seal: NBR 

Miniature indicator with pressure connection M5 for visual indication of pressure. Product type:Indicator  Pressure range:3 - 10 bar Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5  Ambient temperature:-10 ... +50 °C

These precision pressure regulators can be used in various applications. They convince through their small size, high flow rates and high accuracy. Their modular design allows a cost optimized configuration. High reliability and maintenance free use are ensured for a long lifetime. The pressure setting is done by an adjusting screw. The pressure regulator versions with bleeder ports can be used for pressurized air or neutral gases. Due to their plastic housing these pressure regulators are light-weight and inexpensive. These pressure regulators are installed via flange connection on the bottom side. On request all pressure regulators can be adapted to different pressure levels or set to a specific output pressure. Seals can be changed from NBR to EPDM or Viton (FKM). Thereby it is easy to adapt the regulators to special media as oxygen (O2) or drinking water (H2O). Max. setting pressure:5.0 bar Type of pneumatic connection:Flange  Pressure range:0 - 10 bar Ventilation:with secondary exhaust  Medium:non-aggressive media  Returning mechanism:Spring  Ambient temperature:0 ... +60 °C Materials:Housing: POM, seal: NBR, fabric-reinforced 

Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. These one-way restrictors can be screwed directly into the ports of miniature valves or cylinders. They are designed as inlet or outlet restrictors and do have either tube nipple connection including nut or push-in fittings. Pressure range:0 - 12 bar Nominal orifice:2 mm Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5, tube 4x1 (4 x 0.65)  Valve type:Check valves and flow regulators  Ambient temperature:-10 ... +70 °C

Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. These one-way restrictors can be screwed directly into the ports of miniature valves or cylinders. They are designed as inlet or outlet restrictors and do have either tube nipple connection including nut or push-in fittings. Pressure range:0 - 12 bar Nominal orifice:2 mm Medium:Neutral gases Type of pneumatic connection:M5, tube 4x1 (4 x 0.65)  Valve type:Check valves and flow regulators  Ambient temperature:-10 ... +70 °C

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread. Design:with threaded pin  Material:Neodym  Force:50 N Diameter:22 mm Height:6 mm Total height:12.5 mm Weight:11 g Thread:M4  Temperature:60 °C Housing:rubber coated 

Indicator with pressure connection M5 for visual indication of pressure. Product type:Indicator  Pressure range:1.2 - 8 bar Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5  Ambient temperature:-10 ... +50 °C

The fanless PLC with iMX6 processor technology combines compactness with longevity and performance. The device has an integrated flash disk and an easily accessible SD card slot. USB interfaces allow the use of additional change-over memories or external peripherals. Kuhnke controllers with CODESYS SoftMotion CNC+Robotocs provide the user with extensive project planning options for his motion tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots. Configuration:CODESYS Compact PLC  Model:Control cabinet modul  Processor:Freescale i.MX6X ; 1 GHz  Operating system:Linux RT  Software:CODESYS V3 Soft PLC, WebVisu, Softmotion CNC+Robotics  Main memory:512 MB RAM  Interfaces:1 x RS232, 2 x RS485, 2x CAN, 2 x USB 2.0  Dimensions (W x H x D):50 x 190 x 115 mm 

CODESYS Control Runtime is the leading manufacturer-independent programming system according to IEC 61131-3. Programmable Logic Controllers (PLCs), ECUs / mobile controllers, visualization devices, motion controllers and additional automation devices in various industries are programmed with this automation software. The CODESYS runtime is implemented on the control platforms of Kendrion Kuhnke and can therefore be used immediately for the machine builder. Continuously improvements are being made to the programming system and enable users to continue to innovate in the future. Integrated function:Communication with the CODESYS Development System, Loading, management and execution of the applicat Product status:Technology  Application:Compact small controllers, Standard PLC systems for production machines, Panel controllers  Provision:Firmware  Requirements:Kuhnke controller platforms 

Kendrion offers for its CODESYS-based controllers a library with blocks for motion control functions according to PLCopen for various drive controllers. The Kuhnke Motion Control library provides a wide range of function blocks for parameterization, positioning and diagnostics of the drive. The blocks are simple and intuitive to use and support in all phases of the workflow e.g. during programming, commissioning, diagnostics and maintenance. The motion task in the control system can thus be programmed simply, quickly and thus economically. A drive with only a few lines of code is put into operation via the corresponding visualization templates. The library supports drive controllers from various well-known companies and supplies a wide range of standardized functions. The communication between the drives and the control can take place via various fieldbuses such as EtherCAT®, CAN, Modbus or RS-485. Features Integrated function:Function blocks for the parameterization, positioning and diagnosis of the drive  Product status:Standard product  Application:Positioning, pick & place application, format adjustment, Speed control, belt drives, Torque control Provision:Download  Requirements:Available for CODESYS-based controls from Kendrion 

Kendrion's motorized door lock offers increased automation for use in many areas of everyday life. The combination of mechanical locking, motor drive, limit switches and electronic engineering is applied in our motorized door lock. The lock has more features than just locking the door. Closing the door with an adjustable, continuous force extends the life cycle of the seals. The lock is self-adjusting to maintain the lifetime of the seals. The big travel of up to 40 mm offers different end positions in the opening and closing process. Usage of the locking:Automatic pull & push lock  Way of locking:Motorized locked  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:19 W W Max. static holding force:400 N N Max. load force for electrical unlocking:400 N N Connection:Male 15-pin D-sub-miniature connector  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:117 x 227 x 30 mm 

The Kuhnke CIO compact I / O connects various input and output signals in a compact housing in Book size format. The process data of the PLC are made available via the CANopen interface according to the device profile CiA 401. The robust design makes it suitable for use in machine and apparatus engineering. Configuration:16DI/16DO  Function:I/O system with CANopen field bus  Model:Control cabinet modul  Field bus interfaces:CANopen  Interfaces:CANopen  Digital I/Os (integrated):16 DI 5ms / 16 DO 0,5A  Type of connection:multi-pin plug connector  Status indication:system messages, I/O status  Dimensions (W x H x D):160 mm x 30 mm x 100 mm 

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread. Design:with threaded pin  Material:Neodym  Force:180 N Diameter:66 mm Height:8.5 mm Total height:23.5 mm Weight:107 g Thread:M8  Temperature:80 °C Housing:rubber coated 

Remote maintenance and troubleshooting over long distances are only possible with a secure remote connection over the Internet. The central component of the Kuhnke remote service system is the IXplatform of our system partner IXON in Overloon, The Netherlands. The IXplatform is a powerful Industrial Internet of Things platform (Industrial IoT) and connects the control in the machine secure with one of the world-wide distributed data servers. The application on the data servers is web-based and can be accessed with any browser from your PC, smartphone or tablet. The VPN connection provides a secure remote connection for monitoring, programming or troubleshooting on the machine control. The IXrouter is a combined Industrial VPN Router and IoT-Edge Gateway and connects your machine controller, HMI, robots and all other industrial devices in your machine. Integrated function:VPN connection  Product status:Technology  Application:Observation, remote maintenance, data logging  Provision:IXrouter: Industrial VPN Router and IoT-Edge Gateway  Requirements:Available for all KUHNKE PLCs